Pericom NX5012A 2.5v/3.3v cmos xo Datasheet

Ultra Low Jitter PLL Crystal Oscillator 5.0 x 3.2mm
NX501
2.5V/3.3V CMOS XO
5.0 x 3.2mm Ceramic SMD
Package: (Scale: none, Dimensions are in mm)
Product Features
Recommended Land Pattern:
• Very low phase jitter - < 1ps RMS max.
• Wide frequency range - 5 ~ 250MHz
• Thicker crystal for improved reliability
• Low supply current - 60mA max.
• Industrial Temperature Range
• Pb-free & RoHS compliant
• Fast lead time
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
*Note: pads 2 and 5 are
optional (shown as dotted lines).
XO's are designed to fit on industry
standard, 4 pad layouts.
Product Description
The NX501 XO series is a high performance
CMOS crystal oscillator family with very
low jitter performance. It supports various
options including wider frequency range,
2.5V/3.3V voltage, and various stabilities.
It is designed to meet the clock source
specifications for communication systems,
and other high performance equipment.
Pin Functions:
Pin
Function
1
OE Function
2
N/C
3
Ground
4
Output
5
N/C
6
V DD
Applications
• Networking systems
*Extended high frequency power decoupling is recommended (see test circuit for minimum
recommendation). To ensure optimal performance, do not route RF traces beneath the
package.
CREATED USING CADSTD LITE FREEWARE FROM WWW.CADSTD.COM. NON-COMMERCIAL USE ONLY.
• Servers and storage systems
• Profession video equipments
Part Ordering Information:
UX
NX70501 V
• Test and measurement
• FPGA/ASIC clock generation
A
Voltage:
1=+3.3V
2=+2.5V
SaRonix-eCera™ is a Pericom® Semiconductor company
•
I1 FFFF.FFFFFF
FFFF.FFFFFF
B
C
Stability and Temp Range:
Frequency:
Stability Temp Range
A = +/-20 ppm -20/+70°C
B = +/-25 ppm -20/+70°C
C = +/-50 ppm -20/+70°C
D = +/-25 ppm -40/+85°C
E = +/-50 ppm -40/+85°C
US: +1-408-232-9100 TW: +886-3-4518888
FFFF.FFFFFF
MHz, “4 digits/decimal/6 digits” format
•
www.pericom.com
14-0026
All specifications are subject to change without notice.
NX501
Rev B
08/13/14
1
NX501
2.5V/3.3V CMOS XO
Ultra Low Jitter PLL Crystal Oscillator 5.0 x 3.2mm
Electrical Performance
Parameter
Min.
Output Frequency
Typ.
Max.
Units
250
MHz
3.135
3.3
3.465
2.375
2.5
2.625
5
Supply Voltage
Supply Current, Output Enabled
Notes
V
60
See ordering options
mA
Supply Current, Output Disabled only
40
mA
Frequency Stability
±50
ppm
See ordering options
+85
°C
See ordering options
0.4
V
15
pF
55
%
Rise and Fall Time
3
ns
Measured 20/80% of waveform
Jitter, Accumulated, RMS (1-σ)
6
ps
20.000 adjacent periods
Operating Temperature Range
-40
Output Logic 0, VOL
Output Logic 1, VOH
V DD -0.4
V
Output Load
Duty Cycle
45
Jitter, Phase,
RMS
Measured 50% V DD
< 40MHz
0.4
1
ps
12kHz to 5 MHz frequency band
40 to 250MHz
0.4
1
ps
12kHz to 20 MHz frequency band
125MHz, 156.25MHz
0.4
0.6
ps
12kHz to 20 MHz frequency band
40
ps
100,000 random periods
Jitter, pk-pk
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (1 year at 25°C average effective ambient temperature), shock and vibration.
2. Phase jitter typical value is depending on output frequencies.
3. For specifications other than those listed, please contact sales.
Output Enable / Disable Function
Parameter
Min.
Input Voltage (pin 1), Output Enable
Typ.
Max.
Units
0.7 V DD
Input Voltage (pin 1), Output Disable (low power standby)
Notes
V
or open
Output is Hi-Z
0.3 V DD
V
Output Disable Delay
200
ns
Output Enable Delay
200
ns
Start up Time
10
ms
Absolute Maximum Ratings
Parameter
Storage Temperature
Min.
Typ.
-55
Max.
Units
+125
°C
Notes
For the latest product information visit: http://www.pericom.com/products/crystals-and-crystal-oscillators/hiflex-xo/?part=NX501
For test circuit go to: http://www.pericom.com/pdf/sre/tc_6pcmos.pdf
For soldering reflow profile and reliability test ratings go to: http://www.pericom.com/pdf/sre/reflow.pdf
For tape and reel information go to: http://www.pericom.com/pdf/sre/tr_5032_xo.pdf
SaRonix-eCera™ is a Pericom® Semiconductor company
•
US: +1-408-232-9100 TW: +886-3-4518888
•
www.pericom.com
14-0026
All specifications are subject to change without notice.
NX501
Rev B
08/13/14
2
Similar pages