Document 471-1 Shielded Power Inductors – MSS1246 • 12 × 12 mm footprint; 4.6 mm high shielded inductors • Very low DCR and excellent current handling Designer’s Kit C410 contains 3 each of all values. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant matte tin over nickel over phos bronze. Other terminations available at additional cost. Weight: 2.3 g – 2.5 g Ambient temperature –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature +125°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 200/7″ reel; 800/13″ reel; Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 4.7 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 DCR Inductance2 (mOhms) (µH) typ max 3 Isat (A)5 Irms (A)6 SRF typ4 10% 20% 30% 20°C 40°C (MHz) drop drop drop rise rise MSS1246-102ML_ 1.0 ±20% 5.84 6.60 100 MSS1246-332ML_ 3.3 ±20% 12.1 13.60 51 MSS1246-472ML_ 4.7 ±20% 19.1 21.3 42 MSS1246-562ML_ 5.6 ±20% 22.1 24.6 37 MSS1246-682ML_ 6.8 ±20% 24.9 27.7 33 MSS1246-822ML_ 8.2 ±20% 27.4 30.5 31 MSS1246-103ML_ 10 ±20% 36.8 40.9 27 MSS1246-123ML_ 12 ±20% 38.9 43.3 24 MSS1246-153ML_ 15 ±20% 48.6 54.1 22 MSS1246-183ML_ 18 ±20% 51.0 56.7 19.0 MSS1246-223ML_ 22 ±20% 60.3 67.0 18.0 MSS1246-273ML_ 27 ±20% 67.5 75.0 16.0 MSS1246-333ML_ 33 ±20% 81.7 90.8 15.0 MSS1246-393ML_ 39 ±20% 95.2 105.8 13.3 MSS1246-473ML_ 47 ±20% 120.6 134.0 12.0 MSS1246-563ML_ 56 ±20% 133.8 148.7 10.6 MSS1246-683ML_ 68 ±20% 167.3 185.9 9.7 MSS1246-823ML_ 82 ±20% 188.5 209.5 8.8 MSS1246-104ML_ 100 ±20% 216.8 240.9 8.0 MSS1246-124KL_ 120 ±10% 287.2 319.2 7.2 MSS1246-154KL_ 150 ±10% 326.7 363.0 6.6 MSS1246-184KL_ 180 ±10% 379.5 421.7 5.9 MSS1246-224KL_ 220 ±10% 488.2 542.5 5.3 MSS1246-274KL_ 270 ±10% 560.1 622.4 4.7 MSS1246-334KL_ 330 ±10% 731.4 812.7 4.1 MSS1246-394KL_ 390 ±10% 813.7 904.2 3.8 MSS1246-474KL_ 470 ±10% 935.1 1039 3.5 MSS1246-564KL_ 560 ±10% 1193 1326 3.0 MSS1246-684KL_ 680 ±10% 1370 1523 2.8 MSS1246-824KL_ 820 ±10% 1590 1767 2.6 MSS1246-105KL_ 1000 ±10% 2090 2323 2.4 18.4 19.4 19.9 6.00 8.00 10.16 11.24 11.76 4.80 6.30 8.52 9.42 9.86 4.50 6.00 7.64 8.66 9.28 4.19 5.75 6.52 7.34 7.82 3.80 5.20 5.98 6.80 7.34 3.55 4.87 5.72 6.44 6.84 3.30 4.20 5.02 5.76 6.22 3.00 3.95 4.58 5.24 5.54 2.85 3.80 4.28 4.78 5.14 2.71 3.52 3.76 4.24 4.50 2.50 3.40 3.46 3.92 4.18 2.16 2.96 3.14 3.54 3.78 1.90 2.60 2.72 3.14 3.38 1.73 2.39 2.66 3.06 3.24 1.50 2.10 2.34 2.64 2.80 1.44 2.01 2.10 2.40 2.56 1.30 1.80 1.80 2.06 2.24 1.24 1.72 1.64 1.86 2.04 1.20 1.60 1.62 1.82 1.92 1.03 1.42 1.36 1.58 1.70 0.95 1.30 1.34 1.48 1.60 0.89 1.21 1.18 1.30 1.40 0.76 1.00 1.04 1.18 1.24 0.72 0.95 1.00 1.10 1.20 0.65 0.87 0.91 1.00 1.08 0.59 0.79 0.81 0.92 0.98 0.56 0.76 0.76 0.85 0.90 0.50 0.67 0.68 0.77 0.82 0.46 0.62 0.61 0.70 0.75 0.43 0.58 0.56 0.63 0.68 0.36 0.50 1. Please specify termination and packaging codes: MSS1246-105KLC Termination:L =RoHS compliant matte tin over nickel over phos bronze. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). B =Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (800 parts per full reel). 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD‑A fixture in an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD‑D test fixture. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information.. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document 471-1 Revised 09/02/15 Document 471-2 Shielded Power Inductors – MSS1246 Typical L vs Current Typical L vs Frequency 10000 10000 470 µH 180 µH 100 1000 µH 1000 1000 µH Inductance (µH) Inductance (µH) 1000 68 µH 27 µH 10 10 µH 470 µH 180 µH 100 68 µH 27 µH 10 µH 4.7 µH 10 4.7 µH 1 0.1 1 Current (A) 10 100 1 0.01 0.1 1 10 Frequency (MHz) 0.472 ±0.012 12,0 ±0,30 0.472 ±0.012 12,0 ±0,30 123 Dash number X Internal code 0.181 ±0.008* 4,6 ±0,20 Parts manufactured prior to August 2011 may have a different part marking. Recommended Land Pattern 0.217 5,5 0.197 ±0.008 5,0 ±0,20 0.157 4,0 0.138 ±0.016 3,5 ±0,40 0.197 ±0.016 5,0 ±0,40 0.335 8,5 * For optional tin-lead and tin-silver-copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.012 inch (0,3 mm). Dimensions are in inches mm Document 471-2 Revised 09/02/15