Wire-wound Chip Inductors - Open Wound CT132SMF Series From 90 nH to 538 nH Not shown at actual size. RoHS Compliant ctparts.com SPECIFICATIONS Parts are only available in ±5% inductance tolerance. Part Number Turns Inductance (nH) Q Min. Test Freq. (MHz) SRF Min. (GHz) DCR Typ. Ω) (mΩ IDC Max. (A) CT132SMF-09TJ 9 90 100 50 >1.0 8.20 3.5 CT132SMF-10TJ CT132SMF-11TJ CT132SMF-12TJ CT132SMF-13TJ CT132SMF-14TJ CT132SMF-15TJ CT132SMF-16TJ CT132SMF-17TJ CT132SMF-18TJ CT132SMF-19TJ CT132SMF-20TJ 10 11 12 13 14 15 16 17 18 19 20 111 130 169 206 222 246 307 380 422 491 538 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 >1.0 >0.9 >0.8 >0.7 >0.6 >0.6 >0.5 >0.5 >0.4 >0.4 >0.4 9.30 10.5 11.7 10.1 13.6 16.6 21.5 24.5 38.4 39.4 41.6 3.5 3.4 3.4 3.8 3.3 3.2 3.0 2.8 2.2 2.1 2.0 PHYSICAL DIMENSIONS Size A B C D E Max. mm inches 9.0 4.4±0.3 4.6±0.4 8.0±0.5 1.3±0.4 0.354 0.173±0.012 0.181±0.016 0.315±0.020 0.051±0.016 A B CHARACTERISTICS Description: SMD air core inductor Applications: Pagers, Cordless phones, High frequency communication products, Intercom, CATV. Inductance Tolerance: ±5% Testing: Inductance is tested on an HP4287A at 50MHz Operating Temperature: -40°C to +85°C Packaging: Tape & Reel Miscellaneous: RoHS Compliant. Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. E D C CENTRAL Technologies 09.05.06 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2006 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice