Bel ABC75-1T58L 3 x 2 x 1 inch form factor Datasheet

The ABC75 Series of open frame power supplies
feature a wide universal AC input range of 85 V –
264 VAC, offering 75 W of output power in a
compact 3 x 2 x 1 inch footprint, with a variety of
isolated single output voltages.
The high efficiency and high power density of the
ABC family ensures minimal power loss in enduse equipment, thereby facilitating higher
reliability, easier thermal management and meets
regulatory approvals for environmentally-friendly
end products.

3 x 2 x 1 Inch Form Factor

75 Watts with Convection Cooling

Efficiencies up to 93%

-40 to 70 Degree Operating Temperature

Thermal Shut-Down Feature

3.00 Million Hours, Telcordia -SR332-Issue 3

Standby Power < 0.3 W

RoHS Compliant

CE Marked
These power supplies are ideal for telecom,
datacom, industrial equipment and other
applications.








Instrumentation
Lighting
Industrial Applications
Applied Computing
Renewable Energy
Test and Measurement
Robotics
Wireless Communication
North America
+1-866.513.2839
Asia-Pacific
+86.755.29885888
Europe, Middle East
+353 61 225 977
[email protected]
© 2015 Bel Power Solutions, Inc.
BCD.00664_001
ABC75 Series
MODEL NUMBER
DESCRIPTION
VOLTAGE
MAX. LOAD
(CONVECTION)
MIN. LOAD
RIPPLE & NOISE 1
ABC75-1T12L
ABC75-1012L
Screw Terminal
Molex Header
12 V
6.25 A
0.0 A
1%
ABC75-1T15L
ABC75-1015L
Screw Terminal
Molex Header
15 V
5.00 A
0.0 A
1%
ABC75-1T24L
ABC75-1024L
Screw Terminal
Molex Header
24 V
3.12 A
0.0 A
1%
ABC75-1T30L
ABC75-1030L
Screw Terminal
Molex Header
30 V
2.50 A
0.0 A
1%
ABC75-1T48L
ABC75-1048L
Screw Terminal
Molex Header
48 V
1.56 A
0.0 A
1%
ABC75-1T58L
ABC75-1058L
Screw Terminal
Molex Header
58 V
1.29 A
0.0 A
1%
COVER-75-XBC
1
metal cover kit accessory
Ripple is peak to peak with 20 MHz bandwidth and 10 μF (Tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line
voltage and load ranges.
866.513.2839
[email protected]
© 2015 Bel Power Solutions, Inc.
BCD.00664_001
ABC75 Series
Specifications are for nominal input voltage, 25°C unless otherwise stated.
PARAMETER
DESCRIPTION / CONDITION
SPECIFICATION
Input Voltage
Universal
(Derate from 75 W at 100 VAC to 65 W at 85 VAC)
85-264 VAC / 390 VDC2
Input Frequency
47-63 Hz
Input Current
115 VAC:
230 VAC:
1 A max.
0.5 A max.
No Load Power
Typical
< 0.3 W
Inrush Current
115 VAC:
230 VAC:
264 VAC:
25 A
45 A
75 A
Power Factor
@ Full Load
> 0.95
Switching Frequency
Typical
60 kHz
2
Functional, not approved.
PARAMETER
DESCRIPTION / CONDITION
SPECIFICATION
Output Power
Convection:
75 W
Efficiency
48 V, 58 V:
24 V, 30 V:
12 V, 15 V:
93%
91%
90%
Hold-up Time
Typical
>16 ms
Line Regulation
+/-0.5%
Load Regulation
Transient Response
+/-1%
25% step load change, at 0.1A/uS slew rate,
50% duty cycle, 50 Hz = 4%
Voltage Adjustment
Rise Time
recovery time < 5 ms
+/-3%
Typical
55 ms
Set Point Tolerance
+/-1%
Over Current Protection
> 110%
Over Voltage Protection
Latch type (AC recycling required)
Short Circuit Protection
Hiccup mode
PARAMETER
Operating Temperature
110 to 140%
DESCRIPTION / CONDITION
SPECIFICATION
Startup is guaranteed with spec deviation, see Fig 1.
-40 to +70°C
-40 to 0°C
Storage Temperature
-40 to +85°C
Cooling
With natural convection cooling at 100 to 264 VAC
75 W
Relative Humidity
Noncondensing
5% to 95%
Altitude
Operating:
Nonoperating:
16,000 ft
40,000 ft.
Reliability
MTBF according to Telcordia -SR332-Issue 3
3.00 million hours
866.513.2839
[email protected]
© 2015 Bel Power Solutions, Inc.
BCD.00664_001
ABC75 Series
PARAMETER
DESCRIPTION / CONDITION
Conducted Emissions
EN55022-B, CISPR22-B, FCC PART15 - B
Static Discharge
EN61000-4-2:
Level-3
RF Field Susceptibility
EN61000-4-3:
Level-3
Fast Transients/Bursts
Level-3
Level A
Level B
Surge Susceptibility
EN61000-4-4:
Radiated:
Radiated with external core:
(King core K5B RC 25x12x15-M in input cable with 5 Turns)
EN61000-4-5:
Harmonic Current
EN61000-3-2:
Class D
Radiated Emissions
PARAMETER
SPECIFICATION
Agency Approvals
DESCRIPTION / CONDITION
Input to Output: (For ITE application)
Input to GND:
Approved to the latest edition of the following standards:
CSA/UL60950-1, EN60950-1 and IEC60950-1; Class1 SELV.
Nemko, UL, C-UL
CE mark
Complies with LVD Directive
Isolation Voltage
Safety Standard(s)
Level-3
SPECIFICATION
3000 VAC
1500 VAC
Figure 1 – Derating Curve
CONNECTOR
PIN
AC Input Connector
J1
DC Output Connector
J2
DESCRIPTION / CONDITION
Pin 1
Pin 2
Pin 3
AC Line
Not Fitted
AC Neutral
Pin 1, 2
Pin 3, 4
V1 -VE
V1 + VE
Screw Terminal (Option 1)
Molex Connector (Option 2)
Screw Terminal (Option 1)
Molex Connector (Option 2)
MANUFACTURER / PN
Molex: 39357-0003
Tyco: 2-1776112-3
Molex: 1722861103
(Mating conn: Molex 1722561003)
Molex: 39357 -0004
Tyco: 2-1776112-4
Molex: 1722861104
(Mating conn: Molex 1722561004)
866.513.2839
[email protected]
© 2015 Bel Power Solutions, Inc.
BCD.00664_001
ABC75 Series
PARAMETER
DESCRIPTION / CONDITION
Weight
150 g
Dimensions
76.2 x 50.8 x 25.4 mm (3 x 2 x 1 inch)
Figure 2 - Mechanical Drawing - Screw Terminal (Option 1)
866.513.2839
[email protected]
© 2015 Bel Power Solutions, Inc.
BCD.00664_001
ABC75 Series
Figure 3 - Mechanical Drawing - Molex Connector (Option 2)
NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support
systems, equipment used in hazardous environments, or nuclear control systems.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending
on the date manufactured. Specifications are subject to change without notice.
866.513.2839
[email protected]
© 2015 Bel Power Solutions, Inc.
BCD.00664_001
Similar pages