DF005M THRU DF10M MINIATURE GLASS PASSIVATED SINGLE-PHASE-BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Case Style DFM FEATURES ♦ This series is UL listed under the Recognized Component Index, file number E54214 ♦ Plastic package used has Underwriters Laboratory Flammability Classification 94V-0 ♦ Glass passivated chip junctions ♦ Surge overload rating of 50 Amperes peak ♦ Ideal for printed circuit boards ♦ High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension 0.255 (6.5) 0.315 (8.00) 0.245 (6.2) 0.285 (7.24) 0.335 (8.51) 0.320 (8.12) 0.130 (3.3) 0.120 (3.05) 0.080 (2.03) 0.050 (1.27) 0.045 (1.14) 0.035 (0.89) 0.185 (4.69) 0.150 (3.81) 0.023 (0.58) 0.018 (0.46) 0.075 (1.90) 0.055 (1.39) 0.205 (5.2) 0.195 (5.0) 0.013 (3.3) 0.0086 (0.22) 0.350 (8.9) 0.300 (7.6) Dimensions in inches and (millimeters) MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated lead solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Mounting Position: Any Weight: 0.04 ounce, 1.0 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS DF 005M DF 01M Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward output rectified current at TA=40°C I(AV) 1.0 Amp Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps Rating for fusing (t < 8.3ms) I2t 10.0 A2sec Maximum instantaneous forward voltage drop per leg at 1.0A VF 1.1 Volts IR 5.0 500.0 µA Maximum reverse current at rated DC blocking voltage per leg TA=25°C TA=125°C Typical junction capacitance per leg (NOTE 1) Typical thermal resistance per leg (NOTE 2) Operating junction and storage temperature range DF 04M DF 06M DF 08M DF 10M 700 UNITS Volts CJ 25.0 pF RΘJA RΘJL 40.0 15.0 °C/W TJ, TSTG -55 to +150 °C NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.5 x 0.5" (13 x 13mm) copper pads 4/98 DF 02M RATINGS AND CHARACTERISTICS CURVES DF005M THRU DF10M FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG AVERAGE FORWARD OUTPUT CURRENT, AMPERES 1.0 60 HZ RESISTIVE OR INDUCTIVE LOAD 0.5 P.C.B. MOUNTED ON 0.51 x 0.51” (13 x 13mm) COPPER PADS WITH 0.06” (1.5mm) LEAD LENGTH 0 20 40 60 80 AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT 60 TJ=150°C SINGLE SINE-WAVE (JEDEC Method) 50 40 30 1.0 CYCLE 20 10 0 1 10 100 NUMBER OF CYCLES AT 60 Hz 100 120 140 150 AMBIENT TEMPERATURE, °C FIG. 4 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG 100 FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG 1 INSTANTANEOUS REVERSE CURRENT, AMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 1 0.1 TJ=25°C 0.01 0.4 0.6 0.8 1.0 1.2 1.4 0.01 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 1 10 REVERSE VOLTAGE, VOLTS 40 60 80 100 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 100 TRANSIENT THERMAL IMPEDANCE, °C/W 100 20 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG JUNCTION CAPACITANCE, pF TJ=125°C 10 10 1 0.1 0.01 0.1 1 t, HEATING TIME, sec. 10 100