DFLS120L 1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER PowerDI ä123 Features Mechanical Data · · · Guard Ring Die Construction for Transient Protection · · Case: PowerDIä123 High Current Capability and Low Forward Voltage Drop · · · Moisture Sensitivity: Level 1 per J-STD-020C · · · · Low Power Loss, High Efficiency Patented Interlocking Clip Design for High Surge Current Capacity Lead Free Finish, RoHS Compliant (Note 4) "Green" Molding Compound (No Br, Sb) Qualified to AEC-Q101 Standards for High Reliability · · · Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Terminal Connections: Cathode Band Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 e3 Marking & Type Code Information: See Last Page Weight: 0.01 grams (approximate) Ordering Information: See Last Page TOP VIEW Maximum Ratings BOTTOM VIEW @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol Value Unit VRRM VRWM VR 20 V VR(RMS) 14 V Average Forward Current IF(AV) 1.0 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 50 A Unit RMS Reverse Voltage Thermal Characteristics Symbol Value Power Dissipation (Note 1) Characteristic PD 1.67 W Power Dissipation (Note 2) PD 556 mW °C/W Thermal Resistance Junction to Ambient (Note 1) RqJA 60 Thermal Resistance Junction to Ambient (Note 2) RqJA 180 °C/W Thermal Resistance Junction to Soldering (Note 3) RqJS 10 °C/W Tj -55 to +125 °C TSTG -55 to +150 °C Operating Temperature Range Storage Temperature Range Notes: 1. 2. 3. 4. Part mounted on 50.8mm X 50.8mm GETEK board with 25.4mm X 25.4mm copper pad, 25% anode, 75% cathode. TA = 25°C. Part mounted on FR-4 board with 1.8mm X 2.5mm cathode and 1.8mm X 1.2mm anode, 1 oz. copper pads. T A = 25°C. Theoretical RqJS calculated from the top center of the die straight down to the PCB/cathode tab solder junction. RoHS revision 13.2.2003. High Temperature Solder Exemptions Applied, see EU Directive Annex Note 7. DS30444 Rev. 4 - 2 PowerDI is a trademark of Diodes Incorporated. 1 of 3 www.diodes.com DFLS120L ã Diodes Incorporated Electrical Characteristics @ TA = 25°C unless otherwise specified Characteristic Symbol Min Typ Max Unit V(BR)R 20 ¾ ¾ V IR = 1.0mA Forward Voltage VF ¾ ¾ ¾ 0.20 0.30 0.32 ¾ ¾ 0.36 V IF = 0.1A IF = 0.7A IF = 1.0A Leakage Current (Note 5) IR ¾ ¾ 0.26 ¾ ¾ 1.0 mA VR = 5V, TA = 25°C VR = 20V, TA = 25°C Total Capacitance CT ¾ 75 ¾ pF VR = 10V, f = 1.0MHz Reverse Breakdown Voltage (Note 5) 5. Short duration pulse test to minimize self-heating effect. 10 IR, INSTANTANEOUS REVERSE CURRENT (mA) IF, INSTANTANEOUS FORWARD CURRENT (A) Notes: Test Condition TA = 125°C 1 TA = 100°C TA = 85°C 0.1 TA = 25°C 0.01 TA = -40°C 0.001 0 0.2 0.4 0.6 0.8 100 TA = 100°C 10 TA = 85°C 1 0.1 TA = 25°C 0.01 0.001 TA = -40°C 0.0001 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1, Typical Forward Characteristics 0 5 10 15 20 25 30 VR, TYPICAL REVERSE VOLTAGE (V) Fig. 2, Typical Reverse Characteristics 300 f = 1MHz CT, TOTAL CAPACITANCE (pF) 250 200 150 100 50 0 0 5 10 15 20 25 30 VR, REVERSE VOLTAGE (V) Fig. 3, Typical Total Capacitance DS30444 Rev. 4 - 2 PowerDI is a trademark of Diodes Incorporated. 2 of 3 www.diodes.com DFLS120L Ordering Information (Note 6) Device Packaging Notes: Shipping ä DFLS120L-7 PowerDI 123 3000/Tape & Reel 6. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. F02 YM Marking Information F02 = Product Type Marking Code YM = Date Code Marking Y = Year (ex: T = 2006) M = Month (ex: 9 = September) Date Code Key Year 2004 2005 2006 2007 2008 2009 2010 2011 2012 Code R S T U V W X Y Z Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D Package Outline Dimensions PowerDIä123 D H A B C E L L1 E L4 A L Dim Min Max Typ A 3.50 3.90 3.70 B 2.60 3.00 2.80 C 1.63 1.93 1.78 D 0.93 1.00 0.98 E 0.85 1.25 1.00 H 0.15 0.25 0.20 L 0.45 0.85 0.65 L1 — — 1.35 1.10 L2 — — L2 L3 — — 0.20 L3 L4 0.90 1.30 1.05 All Dimensions in mm IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30444 Rev. 4 - 2 PowerDI is a trademark of Diodes Incorporated. 3 of 3 www.diodes.com DFLS120L