Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : Medium-size TK Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 125 °C 2000 h product is available upon request. ● RoHS compliant ● Vibration-proof Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +125 °C 10 V.DC to 100 V.DC 47 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached characteristics list V.DC 10 16 25 35 50 63 80 100 Z(–25 °C)/Z(+20 °C) 3 2 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 6 4 4 3 3 3 3 3 After applying rated working voltage for 2000 hours at +125 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value (Miniaturization product : Within ±35 %) < 300 % of the initial limit (Miniaturization product : Within 350 %) tan d DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.75 Marking 1k 0.90 10 k 0.95 100 k to 1.00 Dimensions L Pressure Relief + (P) (I) Series identification Mark for Lead-Free products (Black dot) A±0.2 B±0.2 Capacitance (µF) 1000 A TK H 0D±0.5 Negative polarity marking (–) – K 0.3 max. (I) Example : 10 V.DC 1000 µF Marking color : BLACK W ( ) Reference size Rated voltage code (Unit : mm) Lot number R. Voltage 10 (V.DC) Code A 16 25 35 50 63 C E V H J 80 100 K 2A Size L A, B H I 0D code H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 W P K 0.90±0.3 1.20±0.3 1.20±0.3 4.4 6.7 6.7 0.70±0.3 0.70±0.3 0.70±0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 125 °C 2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 1000 1500 2200 3300 4700 330 470 680 16 1000 2200 3300 330 470 25 680 1000 2200 330 470 35 680 50 1000 220 330 470 680 63 1000 100 220 330 470 47 100 80 220 330 100 470 47 100 220 330 0D L 12.5 12.5 16 16 18 18 12.5 12.5 12.5 12.5 16 16 18 18 12.5 12.5 12.5 16 16 18 18 12.5 12.5 16 16 18 18 12.5 12.5 16 16 18 18 12.5 12.5 16 16 12.5 12.5 16 16 18 16 18 18 12.5 16 18 18 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 16.5 16.5 16.5 16.5 13.5 13.5 16.5 16.5 13.5 13.5 16.5 16.5 16.5 16.5 16.5 16.5 13.5 16.5 16.5 16.5 Min. Packaging Q'ty Specification Ripple ✽ Size current code (100 kHz) (+125 °C) (mA r.m.s.) H13 800 (H13) 800 J16 1100 (J16) 1100 K16 1300 K16 1300 H13 800 H13 800 H13 800 (H13) 800 J16 1100 (J16) 1100 K16 1300 K16 1300 H13 800 H13 800 (H13) 800 J16 1100 (J16) 1100 K16 1300 K16 1300 H13 800 (H13) 800 J16 1100 (J16) 1100 K16 1300 K16 1300 H13 600 H13 600 J16 900 (J16) 900 K16 950 K16 950 H13 350 H13 350 J16 500 J16 500 H13 250 (H13) 250 J16 350 (J16) 350 K16 400 (J16) 350 K16 400 K16 400 H13 250 J16 350 K16 400 K16 400 ESR (100 kHz) (Ω) +20 °C 0.120 0.120 0.080 0.080 0.075 0.075 0.120 0.120 0.120 0.120 0.080 0.080 0.075 0.075 0.120 0.120 0.120 0.080 0.080 0.075 0.075 0.120 0.120 0.080 0.080 0.075 0.075 0.230 0.230 0.150 0.150 0.140 0.140 0.260 0.260 0.180 0.180 0.420 0.420 0.300 0.300 0.280 0.300 0.280 0.280 0.420 0.300 0.280 0.280 –40 °C 1.80 1.80 1.20 1.20 1.10 1.10 1.80 1.80 1.80 1.80 1.20 1.20 1.10 1.10 1.80 1.80 1.80 1.20 1.20 1.10 1.10 1.80 1.80 1.20 1.20 1.10 1.10 3.40 3.40 2.20 2.20 2.10 2.10 5.20 5.20 3.60 3.60 8.40 8.40 6.00 6.00 5.60 6.00 5.60 5.60 8.40 6.00 5.60 5.60 tan d (120 Hz) (+20 °C) Part No. Reflow Taping (pcs) 0.30 0.30 0.32 0.34 0.36 0.38 0.23 0.23 0.23 0.23 0.25 0.27 0.27 0.29 0.18 0.18 0.18 0.18 0.18 0.18 0.20 0.16 0.16 0.16 0.16 0.16 0.16 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.10 0.10 0.10 0.10 EEETK1A102AQ EEETKA152UAQ EEETK1A222AM EEETKA332UAM EEETK1A332AM EEETK1A472AM EEETK1C331AQ EEETK1C471AQ EEETK1C681AQ EEETKC102UAQ EEETK1C102AM EEETKC222UAM EEETK1C222AM EEETK1C332AM EEETK1E331AQ EEETK1E471AQ EEETKE681UAQ EEETK1E681AM EEETKE102UAM EEETK1E102AM EEETK1E222AM EEETK1V331AQ EEETKV471UAQ EEETK1V471AM EEETKV681UAM EEETK1V681AM EEETK1V102AM EEETK1H221AQ EEETK1H331AQ EEETK1H471AM EEETKH681UAM EEETK1H681AM EEETK1H102AM EEETK1J101AQ EEETK1J221AQ EEETK1J331AM EEETK1J471AM EEETK1K470AQ EEETKK101UAQ EEETK1K101AM EEETKK221UAM EEETK1K221AM EEETKK331UAM EEETK1K331AM EEETK1K471AM EEETK2A470AQ EEETK2A101AM EEETK2A221AM EEETK2A331AM (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (9) (10) (10) (10) (10) (10) (10) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) (11) 200 200 125 125 125 125 200 200 200 200 125 125 125 125 200 200 200 125 125 125 125 200 200 125 125 125 125 200 200 125 125 125 125 200 200 125 125 200 200 125 125 125 125 125 125 200 125 125 125 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “Q” or “M” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016