GBL2A thru GBL2M Glass Passivated Single-Phase Bridge Rectifiers Reverse Voltage 50 to 1000 Volts Forward Current 2.0 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Ideal for printed circuit boards Glass passivated chip junction High surge current capability Mechanical Data Case: GBL(2S) Molded plastic body Terminals: Plated leads solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 260oC/10 seconds, 0.375 (9.5mm) lead length, 5lbs.(2.3kg) tension Mounting Position: Any Weight: 0.074 oz., 2.1 g Package outline dimensions in millimeters Maximum Ratings and Electrical Characteristics Rating at 25oC ambient temperature unless otherwise specified. Parameter Symbols GBL2A GBL2B GBL2D GBL2G Maximum repetitive peak reverse voltage VRRM 50 100 200 Maximum RMS voltage VRMS 35 70 140 V DC 50 100 200 Maximum DC blocking voltage Maximum average forward rectified output current at o TA=50 C Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 1.0A Maximum DC reverse current at rated DC blocking voltage per leg TA=25oC TA=100oC GBL2K GBL2M Units 400 600 800 1000 Volts 280 420 560 700 Volts 400 600 800 1000 Volts IF(AV) 2.0 Amps IFSM 65.0 Amps 2 17 A 2 se c VF 1.0 Volt IR 5.0 250.0 uA pF It Rating for fusing (t<8.3ms) GBL2J CJ 25 Typical thermal resistance per leg (Note 1) RθJA (2) RθJC (1) 32 13 Operating junction and storage temperature range TJ, TSTG -55 to +150 Typical junction capacitance per leg at 4.0V, 1MHz Notes: 1. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B with 0.47” x 0.47” (12mm x 12mm) Copper Pads. 452 o C/W o C RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) 453