Power Inductors - Shielded SPECIFICATIONS CTSLF0732 Series From 3.3 µH to 1000 µH Not shown at actual size. ctparts.com Parts are available in ±20% tolerance only. CTSLF0732TF Please specify “F” for RoHS compliant Inductance (µH) L Test Freq. (kHz) DCR ±20% Ω) (Ω Rated DC (A) CTSLF0732T_-3R3M CTSLF0732T_-4R7M CTSLF0732T_-6R8M 3.3 4.7 6.8 1.0 1.0 1.0 0.023 0.036 0.041 1.90 1.70 1.60 CTSLF0732T_-100M CTSLF0732T_-150M CTSLF0732T_-220M CTSLF0732T_-330M CTSLF0732T_-470M CTSLF0732T_-680M 10 15 22 33 47 68 1.0 1.0 1.0 1.0 1.0 1.0 0.053 0.075 0.110 0.160 0.240 0.310 1.40 1.10 0.96 0.75 0.67 0.59 CTSLF0732T_-101M CTSLF0732T_-151M CTSLF0732T_-221M CTSLF0732T_-331M CTSLF0732T_-471M CTSLF0732T_-681M 100 150 220 330 470 680 1.0 1.0 1.0 1.0 1.0 1.0 0.450 0.650 1.050 1.670 2.050 3.150 0.45 0.37 0.29 0.22 0.20 0.16 CTSLF0732T_-102M 1000 1.0 4.780 0.13 Part Number PHYSICAL DIMENSIONS Size mm inches CHARACTERISTICS Description: SMD (shielded) power inductor Applications: For power source circuits, low profile type DC to DC converters, DC to AC inverters etc. Operating Temperature: -40°C to +85°C Inductance Tolerance: ±20% Testing: Inductance is tested on an HP4284A at 1.0 kHz, 0.5V Rated Current: Value obtained when DC current flows and the initial value of inductance has fallen by 10%. Packaging: Tape & Reel Marking: Parts are marked with inductance code Miscellaneous: RoHS Compliant available. Magnetically shielded Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. A B E Typ. 7±0.2 7±0.2 3.2±0.2 4.0 2.0 0.28±0.008 0.126±0.008 0.157 0.079 A Marking (Inductance code) XXX Unit: mm 1.5 4.9 1.5 2.2 02.20.09 TECHNOLOGIES D Typ. 0.28±0.008 PAD LAYOUT CENTRAL C Manufacturer of Passive Components 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2009 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice C B E D