AME AME385-1.2 Shunt Bandgap Voltage Reference n General Description The AME385-1.2 is a micropower 2-terminal band-gap voltage regulator diode. It operates over a 30µA to 20mA current range. Each circuit is trimmed at wafer sort to provide a ± 0.5% initial tolerance. The design of the AME385-1.2 allows for a large range of load capacitances and operating currents. The low start-up current makes these parts ideal for battery applications. n Functional Block Diagram VR AME offers this part in a TO-92 and SOP-8 packages as well as the space saving SOT-23. Bandgap Cell Feedback Current Shunt n Features l Small Packages: SOT-23, TO-92, SOP-8 GND l Tolerates Capacitive Loads l Fixed Reverse Breakdown Voltage of 1.235V l Tight Voltage Tolerance ------- ±0.5% l Wide Operating Current ------- 30µA to 20mA l Wide Temperature Range ----- -40oC to +85oC n Typical Application l Low Temperature Coefficient --100ppm/oC (max) l Excellent Transient Response VS VS l All AME's Lead Free Products Meet RoHS Standards. RS VR n Applications VR = 1.235V l Portable Electronics l Power Supplies l Computer Peripherals 0.1µ F Value optional l Data Acquisition Systems l Battery chargers l Consumer Electronics VS - VR RS = Rev.G.03 I 1 AME AME385-1.2 Shunt Bandgap Voltage Reference n Pin Configuration SOP-8 Top View 8 7 6 SOT-23 Top View 5 AME 385-1.2 AME 385-1.2 3 1. NC 2. NC 3. NC AME385 4. AME385 1. + 2. - 3. NC* - 5. NC 6. NC 1 2 3 4 1 2 7. NC 8. + * Die Attach: * Die Attach: Non-Conductive Epoxy Conductive Epoxy TO-92-3 Top View TO-92-2 Top View AME 385-1.2 AME385 1. NC* 2. + 3. - AME 385-1.2 AME385 * Die Attach: 2 3 2. - * Die Attach: Non-Conductive Epoxy 1 1. + Non-Conductive Epoxy 1 2 * The NC pin must float or be connected to - (negative) 2 Rev.G.03 AME AME385-1.2 Shunt Bandgap Voltage Reference n Ordering Information AME385 x x x x x - x Special Feature2 Special Feature1 Number of Pins Package Type Operating Ambient Temperature Range Accuracy Accuracy A: 0.5% (SOT-23) (SOP-8) Operating Ambient Temperature Range Package Type E: -40OC to +85OC A: TO-92 E: SOT-2X H: SOP Number of Pins A: 8 S: 2 T: 3 Special Feature1 Z: Lead Free Special Feature2 (For TO-92 Package Only) N/A: 1: Package Lead Pitch Taping 5.08mm 2.54mm Bulk (TO-92-2) (TO-92-3) Rev.G.03 3 AME AME385-1.2 Shunt Bandgap Voltage Reference n Ordering Information (contd.) 4 Part Number Marking* Accuracy Package Operating Ambient Temperature Range AME385AEET ABXww 0.5% SOT-23 - 40oC to +85oC AME385AEETZ ABXww 0.5% SOT-23 - 40oC to +85oC AME 385 AME385AEAS 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEAS-1 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEASZ 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEASZ-1 0.5% TO-92-2 - 40oC to +85oC AEAS yyww AME 385 AME385AEAT 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEAT-1 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEATZ 0.5% TO-92-3 - 40oC to +85oC AEAT yyww AME 385 AME385AEATZ-1 0.5% TO-92-3 - 40oC to +85oC AEAT yyww 385 AME385AEHA AEHA 0.5% SOP-8 - 40oC to +85oC yyww 385 AME385AEHAZ AEHA 0.5% SOP-8 - 40oC to +85oC yyww Note: ww & yyww represents the date code pls see the Date Code Rule on Package Dimension. * A line on top of the first letter represents lead free plating such as ABXww. Please consult AME sales office or authorized Rep./Distributor for the availability of voltage accuracy and package type. Rev.G.03 AME AME385-1.2 Shunt Bandgap Voltage Reference n Absolute Maximum Ratings Parameter Supply Current Maximum Unit 50 mA Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device n Recommended Operating Conditions Parameter Symbol Rating Unit Ambient Temperature Range TA - 40 to +85 o C Junction Temperature Range TJ - 40 to +125 o C Storage Temperature Range TSTG - 65 to +150 o C 100µA ~ 20mA Supply Current n Electrical Specifications Unless otherwise specified, TA = 0~70OC, IR = 100µA Parameter Reference Voltage, ±0.5% Reference Voltage Change With Current Symbol Test Condition VREF IREF = 100µA 1.229 1.235 1.241 IMIN < I < 1mA 1.5 3 1mA < I < 20mA 5 20 dV REF/I Min Typ Max Units V mV Reverse Dynamic Impedence RDI IR = 100µA, f=20Hz 1.5 Ohm Wideband Noise (rms) Vn IR = 100µA, 10 Hz<f<10KHz 60 µV IR = 100µA, TA=25oC, T=1000 Hours 20 ppm 0oC < TA < 70 oC 100 ppm/oC Long term Stability Reference Voltage Temp. Coeff. Operation Current Rev.G.03 VREFTC IOP 0.030 20 mA 5 AME AME385-1.2 Shunt Bandgap Voltage Reference n Thermal Information Parameter Package SOT-23 Thermal Resistance* (Junction to Case) TO-92-2 TO-92-3 SOP-8 SOT-23 Thermal Resistance (Junction to Ambient) TO-92-2 TO-92-3 SOP-8 SOT-23 Internal Power Dissipation TO-92-2 TO-92-3 SOP-8 Die Attach Non-Conductive Epoxy Symbol θJC Conductive Epoxy 80 o C/W o C/W 60 280 θJA Conductive Epoxy Non-Conductive Epoxy Unit 140 Conductive Epoxy Non-Conductive Epoxy Maximum 150 150 400 PD 625 mW 810 Maximum Junction Temperature 150 o C Solder Iron (10 Sec)** 350 o C * Measure θJC on center of molding compound if IC has no tab. ** MIL-STD-202G 210F 6 Rev.G.03 AME AME385-1.2 Shunt Bandgap Voltage Reference n Characterization Curve(For reference only) Normalized Percentage Change vs. Temp. Reference Voltage Change vs. Current 0.1 2 -0.1 Change of VREF (mV) Change of V REF (%) 0 I=100µA -0.2 -0.3 -0.4 1 0 -0.5 -1 -0.6 -50 0 50 100 150 0.01 Temperature (o C) 1 100 Operation Current (mA) Reverse Characteristic Forward Characteristic 100 1 IF (mA) 10 IR (uA) 85O C 1 25O C 0.125 85O C 25O C 0 0.1 0 0.65 1.3 VR (V) 0.001 0.1 10 VF (V) Line Transient Response 0.5V/DIV 5V/DIV 25oC VIN VR 200µS/DIV Rev.G.03 7 AME AME385-1.2 Shunt Bandgap Voltage Reference n Date Code Rule Marking Date Code Year A A A W W xxx0 A A A W W xxx1 A A A W W xxx2 A A A W W xxx3 A A A W W xxx4 A A A W W xxx5 A A A W W xxx6 A A A W W xxx7 A A A W W xxx8 A A A W W xxx9 n Tape and Reel Dimension SOT-23 P W AME AME PIN 1 Carrier Tape, Number of Components Per Reel and Reel Size 8 Package Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size SOT-23 8.0±0.1 mm 4.0±0.1 mm 3000pcs 180±1 mm Rev.G.03 AME AME385-1.2 Shunt Bandgap Voltage Reference n Tape and Reel Dimension TO-92-3 AME AME PIN 1 W P Carrier Tape, Number of Components Per Reel and Reel Size Package TO-92-3 Carrier Width (W) +1.0 mm -0.5 18.0 Pitch (P) Part Per Full Reel Reel Size 12.7±0.2 mm 2000pcs N/A TO-92-2 AME AME PIN 1 W P Carrier Tape, Number of Components Per Reel and Reel Size Package TO-92-2 Rev.G.03 Carrier Width (W) +1.0 mm -0.5 18.0 Pitch (P) Part Per Full Reel Reel Size 12.7±0.2 mm 2000pcs N/A 9 AME AME385-1.2 Shunt Bandgap Voltage Reference n Tape and Reel Dimension SOP-8 P PIN 1 W AME AME Carrier Tape, Number of Components Per Reel and Reel Size 10 Package Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size SOP-8 12.0±0.1 mm 4.0±0.1 mm 2500pcs 330±1 mm Rev.G.03 AME AME385-1.2 Shunt Bandgap Voltage Reference n Package Dimension SOT-23 Top View Side View D SYMBOLS H E INCHES MIN MAX MIN MAX A 1.00 1.40 0.0394 0.0551 A1 0.00 0.15 0.0000 0.0059 b 0.35 0.50 0.0138 0.0197 D 2.70 3.10 0.1063 0.1220 E 1.40 1.80 0.0551 0.0709 θ1 L PIN 1 MILLIMETERS 1.90 BSC e e H 2.40 0 o 0.09449 0.11811 0.0138BSC 10 o 0 o 10 o A θ1 3.00 0.35BSC L Front View 0.0748 BSC A1 b SOP-8 Top View Side View C SYMBOLS E H L θ D MAX MIN MAX A 1.35 1.75 0.05315 0.0689 A1 0.10 0.30 0.00394 0.01181 A A2 7o(4X) 0.05799 REF B 0.33 0.51 0.01299 0.02008 C 0.19 0.25 0.00748 0.00984 D 4.80 5.33 0.18898 0.20984 E 3.80 4.00 0.14961 0.15748 1.27 BSC 0.05000 BSC L 0.40 1.27 0.01575 0.05000 H 5.80 6.30 0.22835 0.24803 y - 0.10 θ 0 o 8 o 0 o 0.00394 8o A1 e 1.473 REF e Front View INCHES MIN A2 PIN 1 MILLIMETERS B Rev.G.03 11 AME AME385-1.2 Shunt Bandgap Voltage Reference n Package Dimension TO-92-3 (bulk pack) SYMBOLS Top View A L e e1 w PIN 1 D Side View A R INCHES MIN MAX MIN MAX 2.80 4.95 0.1102 0.1949 b 0.40REF 0.0157REF E 3.94REF 0.1551REF e 2.54REF 0.1000REF e1 1.27REF 0.0500REF L E-PIN C 1/16 MILLIMETERS 12.70 15.49 2.29 R 0.5000 0.6098 0.0902 W 0.35 0.76 0.0138 0.0299 D 3.80 4.95 0.1496 0.1949 b Notes: 1. Package outline exclusive of any mold flashes dimension. 2. Package outline exclusive of burr dimension. 3. Lead pitch=2.54mm is bulk pack. 4. Lead pitch=5.08mm is tape pack. E TO-92-2 (bulk pack) SYMBOLS Top View A L e e1 w PIN 1 D E-PIN C 1/16 MILLIMETERS MIN MAX MIN MAX 4.00 4.95 0.1575 0.1949 b 0.40REF 0.0157REF E 3.94REF 0.1551REF e 2.54REF 0.1000REF e1 1.27REF 0.0500REF L 12.70 A R 15.49 2.29 R Side View INCHES 0.5000 0.6098 0.0902 W 0.35 0.76 0.0138 0.0299 D 3.80 4.95 0.1496 0.1949 b E 12 Notes: 1. Package outline exclusive of any mold flashes dimension. 2. Package outline exclusive of burr dimension. 3. Lead pitch=2.54mm is bulk pack. 4. Lead pitch=5.08mm is tape pack. Rev.G.03 AME AME385-1.2 Shunt Bandgap Voltage Reference n Package Dimension TO-92-3 (tape pack) SYMBOLS Top View A L b E e e1 w PIN 1 D E-PIN C 1/16 A R INCHES MIN MAX MIN MAX 2.80 4.95 0.1102 0.1949 0.40REF 2.40 3.94 0.0157REF 0.0945 0.1551 e 5.08REF 0.2REF e1 2.54REF 0.1REF L Side View MILLIMETERS 12.70 15.49 2.00 R 0.5000 0.6098 0.0787 W 0.35 0.76 0.0138 0.0299 D 3.80 4.95 0.1496 0.1949 b Notes: 1. Package outline exclusive of any mold flashes. 2. Package outline exclusive of burr dimension. 3. Lead pitch=2.54mm is bulk pack. 4. Lead pitch=5.08mm is tape pack. E TO-92-2 (tape pack) Top View SYMBOLS L A e e1 w b PIN 1 D E-PIN C 1/16 E MIN MAX MIN MAX 2.80 4.95 0.1102 0.1949 0.40REF 2.40 R 3.94 0.0157REF 0.0945 0.1551 5.08REF 0.2REF e1 2.54REF 0.1REF 12.70 15.49 2.00 R A INCHES e L Side View MILLIMETERS 0.5000 0.6098 0.0787 W 0.35 0.76 0.0138 0.0299 D 3.80 4.95 0.1496 0.1949 b E Notes: 1. Package outline exclusive of any mold flashes. 2. Package outline exclusive of burr dimension. 3. Lead pitch=2.54mm is bulk pack. 4. Lead pitch=5.08mm is tape pack. Rev.G.03 13 www.ame.com.tw E-Mail: [email protected] Life Support Policy: These products of AME, Inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of AME, Inc. AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. AME, Inc. , November 2008 Document: 2003/2037-DS385-1.2-G.03 Corporate Headquarter AME, Inc. 2F, 302 Rui-Guang Road, Nei-Hu District Taipei 114, Taiwan. Tel: 886 2 2627-8687 Fax: 886 2 2659-2989