D58V0M4U8MR PRODUCT ADVANCED NEW INFORMATION 58V UNIDIRECTIONAL TVS DIODE ARRAY Features Mechanical Data 2.7kW Peak Pulse Power (tp = 8x20µs) Provides ESD Protection per IEC 61000-4-2 Standard: Air ±30kV, Contact ±30kV 4 Channels of ESD Protection and 4 Decoupling Capacitances Typically Used in Power Over Ethernet PSE Equipment against Case: SO-8 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish annealed over Copper leadframe Line Overvoltages (Lead Free Plating). Solderable per MIL-STD-202, Method 208 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Weight: 0.08 grams (approximate) SO-8 PS1 PS4 GND GND GND GND PS2 PS3 Top View Pin Configuration Top View Device Schematic Ordering Information (Note 4) D58V0 M X B X XXX- XX Voltage Capacitance 5V0: 5.0 Volts X: Extremely Low (<0.5pF) 58V0: 58.0 Volts F: Ultra Low (0.5 ~ 1.0pF) P: Very Low (1.1 ~ 10pF) L: Low (10.1 ~ 20pF) M: Medium (>20pF) Product D58V0M4U8MR-13 Notes: # of Channels Polarity # of Pins Package 1: 1 Channel 2: 2 Channels 4: 4 Channels 6: 6 Channels B: Bidirectional (Symmetrical) U: Unidirectional A: Bidirectional (Asymmetrical) 2: 2 Pins 3: 3 Pins 5: 5 Pins 6: 6 Pins 8: 8 Pins 10: 10 Pins LP3: X3-DFN0603-2 LP: X1-DFN1006-2 LP4: X2-DFN1006-2 WS: SOD323 T: SOD523/SOT523 SO: SOT23/SOT25 W: SOD123/SOT323 TS: TSOT25/TSOT26 S: SOT353/SOT363 V:SOT553/SOT563 Compliance Standard Marking TV58 Reel size(inches) 13 Tape width(mm) 12 Packing 7: 7” reel 7B: 7” reel (DFN1006 Package Only) 13: 13” reel Quantity per reel 2500/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information Top View 8 5 Logo Part Marking TV58 Xth week: 01 ~ 53 YY WW Year: “13” = 2013 1 D58V0M4U8MR Document number: DS36183 Rev. 2 - 2 4 1 of 5 www.diodes.com April 2014 © Diodes Incorporated D58V0M4U8MR Maximum Ratings (@TA = +25°C, unless otherwise specified.), Per Element Symbol Value Unit Peak Pulse Power Dissipation Characteristic PPP 2700 W 8/20µs, Per Figure 1 Peak Pulse Current IPP 24 A 8/20µs, Per Figure 1 VESD_Contact VESD_Air ±30 kV IEC 61000-4-2 Standard ±30 kV IEC 61000-4-2 Standard ESD Protection – Air Discharge Thermal Characteristics Characteristic Symbol Package Power Dissipation (Note 5) Thermal Resistance, Junction to Ambient (Note 5) Operating and Storage Temperature Range Value Unit PD 1.0 W RθJA 125 °C/W TJ, TSTG -65 to +150 °C Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Reverse Standoff Voltage Symbol Min Typ Max Unit Test Conditions VRWM — — 58 V — Channel Leakage Current (Note 6) IRM — — 0.2 μA VRWM = 58V Breakdown Voltage VBR 64.4 — 71.2 V IR = 1mA Clamping Voltage VCL — — 100 V IPP = 24A, tp = 8/20μS Channel Input Capacitance CT — 55 — pF VR = 50V, f = 1MHz Notes: 5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at http://www.diodes.com. 6. Short duration pulse test used to minimize self-heating effect. 100 PPP(TJ INITIAL)/ PPP(TJ INITIAL = 25°C) 110 IPP, PEAK PULSE CURRENT (%Ipp) PRODUCT ADVANCED NEW INFORMATION ESD Protection – Contact Discharge Conditions Peak Value Ipp Half Value Ipp/2 50 0 8x20 Waveform as defined by R.E.A. 0 20 40 t, TIME (s) Figure 1 Pulse Waveform D58V0M4U8MR Document number: DS36183 Rev. 2 - 2 60 2 of 5 www.diodes.com 100 90 80 70 60 50 40 30 20 10 0 0 25 50 75 100 125 150 TJ (°C) Figure 2 Peak Power Dissipation vs. Initial Junction Temperature 175 April 2014 © Diodes Incorporated D58V0M4U8MR 100.0 100.0 TJ Initial = 25°C IPP (A) PPP (kW) 10.0 1.0 1.0 TJ Initial = 25°C 8/20µs 0.1 1.0E-03 0.1 1.0E-01 1.0E+00 1.0E+01 tp (mS) Figure 3 Peak Pulse Power vs. Exponential Pulse Duration (TJ Initial = 25°C) 1.0E-02 70 80 90 100 VCL (V) Figure 4 Clamping Voltage vs. Peak Pulse Current (Exponential Waveform, Maximum Values) 1.0E+01 1000 f = 1MHz VOSC = 30mVRMS TJ = 25°C IFM (A) CT (pF) 1.0E+00 100 1.0E-01 TJ = 25°C TJ = 125°C 10 40 1.0E-02 45 50 55 VR (V) Figure 5 Capacitance vs. Voltage (typical values) 0 0.5 1 1.5 VFM (V) Figure 6 Peak Forward Voltage Drop vs. Peak Forward Current (typical values) 1.E+04 1 VR = VRWM 1.E+03 1.E+02 IR (nA) Zth(j-a)/ Rth(j-a) PRODUCT ADVANCED NEW INFORMATION 10.0 0.1 1.E+01 1.E+00 1.E-01 0.01 1.0E-03 1.0E-01 1.0E+01 1.0E+03 tP (s) Figure 7 Relative Variation of Thermal Impedance Junction Ambient vs. Pulse Duration D58V0M4U8MR Document number: DS36183 Rev. 2 - 2 1.E-02 25 100 125 150 TJ (°C) Figure 8 Leakage Current vs. Junction Temperature (typical values) 3 of 5 www.diodes.com 50 75 April 2014 © Diodes Incorporated D58V0M4U8MR Package Outline Dimensions 0.254 PRODUCT ADVANCED NEW INFORMATION Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. E1 E A1 L Gauge Plane Seating Plane Detail ‘A’ h 7°~9° 45° Detail ‘A’ A2 A A3 b e D SO-8 Dim Min Max A 1.75 A1 0.10 0.20 A2 1.30 1.50 A3 0.15 0.25 b 0.3 0.5 D 4.85 4.95 E 5.90 6.10 E1 3.85 3.95 e 1.27 Typ h 0.35 L 0.62 0.82 0 8 All Dimensions in mm Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X C1 C2 Dimensions X Y C1 C2 Value (in mm) 0.60 1.55 5.4 1.27 Y D58V0M4U8MR Document number: DS36183 Rev. 2 - 2 4 of 5 www.diodes.com April 2014 © Diodes Incorporated D58V0M4U8MR IMPORTANT NOTICE PRODUCT ADVANCED NEW INFORMATION DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com D58V0M4U8MR Document number: DS36183 Rev. 2 - 2 5 of 5 www.diodes.com April 2014 © Diodes Incorporated