Industrial Ethernet Switch DIN-Rail Unmanaged PoE Ethernet Switch v1.0 / Jun, 2013 IPS-1042FA Series Industrial 6-port slim type unmanaged PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x100Base-FX Industrial Ethernet Switch IPS-1042FA Series Industrial Media Converter Features ▪ IPS-1042FA series provide 4x10/100Base-T(X) PoE(P.S.E.) and 2x100Base-FX V single/multi-mode fiber ports ▪ Supports IEEE 802.3at compliant 30Watts PoE per port ▪ Support auto-negotiation and auto-MDI/MDI-X Industrial Device Server ▪ Support store and forward transmission ▪ Support flow control ▪ Support surge protection technology ▪ Warning system by relay output ▪ Slim type rigid IP-30 housing design Industrial Wireless Access Point ▪ DIN-Rail and wall mounting enabled Introduction IPS-1042FA series can be used in connecting several Ethernet devices like Ethernet I/O, IP-Camera or other Ethernet switches. In addition, there are two different power inputs at terminal block to avoid interruption caused by power down. When the primary DC power input fails, the backup power input will take over immediately to guarantee a non-stop operation. IP Camera (PD) PoE DVR PoE IPS-1042FA Series IP Camera (PD) IP Camera (PD) Connections of Ethernet devices D esign ed for R u gged E xcellence Network Management Software PoE Long Distance Transmission Accessories IP Camera (PD) Industrial M2M Gateway Practical Operation Industrial Cellular VPN Router IPS-1042FA series are unmanaged PoE Ethernet switches with 4 x 10/100Base-T(X) P.S.E. and 2x100Base-FX ports. IPS-1042FA series supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IPS-1042FA series has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. IPS1042FA series support redundant power inputs, configurable relay output alarm and rigid IP-30 housing. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. 1-397 Industrial Ethernet Switch DIN-Rail Unmanaged PoE Ethernet Switch v1.0 / Jun, 2013 Dimensions Industrial Ethernet Switch 1 (Unit=mm) PoE Pin Assignment 10/100Base-T(X) P.S.E. RJ-45 Port RJ-45 Pin Definition Pin No. Description #1 TD+ with PoE Power input + #2 TD- with PoE Power input + #3 RD+ with PoE Power input - #6 RD- with PoE Power input - Specifications ORing Switch Model IPS-1042FA-MM-SC IPS-1042FA-SS-SC 4 4 2 2 Physical Ports 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. Fiber Ports Number Fiber Ports Specifications Fiber Ports standard 100Base-FX 100Base-FX Fiber Mode Multi-mode Single-mode 62.5/125 µm & 50/125 µm 9/125 µm SC SC Fiber Diameter (µm) Fiber Optical Connector Typical Distance (km) Wavelength (nm) 1-398 w w w.oring - net wo rk in g.co m 2 km 30 km 1310 nm 1310 nm Industrial Ethernet Switch DIN-Rail Unmanaged PoE Ethernet Switch Fiber Ports Specifications IPS-1042FA-MM-SC IPS-1042FA-SS-SC -14 dBm -23.5 dBm -8 dBm -15 dBm 0 dBm 0 dBm -31 dBm -34 dBm 7.5 dB 19 dB Max. Output Optical Power (dBm) Min. Output Optical Power (dBm) Max. Input Optical Power (Saturation) Min. Input Optical Power(Sensitivity) Link Budget (dB) Industrial Media Converter Technology Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-T(X) and 100Base-FX IEEE 802.3x for Flow control IEEE 802.3at PoE specification MAC Table 2048 MAC addresses Processing Store-and-Forward Industrial Device Server LED Indicators Green : Power LED x 2 Fault Indicator Amber : Indicate PWR1 or PWR2 failure 10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Green for PoE power injected. 100Base-FX Fiber Port Indicator Green for port Link/Act. Industrial Wireless Access Point Power Indicator Fault contact Relay Relay output to carry capacity of 1A at 24VDC Power Redundant Input Power Dual DC inputs. 50~57VDC on 6-pin terminal block. Overload Current Protection Present Reverse Polarity Protection NOT Present 5.6 Watts (power consumption of P.S.E. is not included) Physical Characteristics IP-30 Dimensions (W x D x H) 26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.) Weight (g) Industrial M2M Gateway Enclosure 395 g Environmental Storage Temperature -40 to 85°C (-40 to 185°F) Operating Temperature -40 to 70°C (-40 to 158°F) Operating Humidity 5% to 95% Non-condensing Industrial Cellular VPN Router 6.78 Watts (power consumption of P.S.E. is not included) Power Consumption (Typ.) Industrial Ethernet Switch ORing Switch Model v1.0 / Jun, 2013 FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 5 years Network Management Software EMI Accessories Regulatory Approvals D esign ed for R u gged E xcellence 1-399 Industrial Ethernet Switch DIN-Rail Unmanaged PoE Ethernet Switch v1.0 / Jun, 2013 Ordering Information I P S -1 AA B CC -DD -E E 10/100Base-T(X) P.S.E. Port Number Code Definition Industrial Ethernet Switch 1 1-400 Option - 04: 4 ports Model Name Available Model Additional Port Number - 2: 2 ports Additional Port Type - FA: 100 Base-FX Fiber Optical Mode - MM: Multi-mode - SS: Single-mode Fiber Optical Connector - SC: SC connector Description IPS-1042FA-MM-SC Industrial 6-port slim type unmanaged PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x100Base-FX, multimode, 2Km/1310nm, SC connector IPS-1042FA-SS-SC Industrial 6-port slim type unmanaged PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x100Base-FX, singlemode, 30Km/1310nm, SC connector Packing List ‧IPS-1042FA ‧DIN-Rail Kit ‧Wall-mount Kit ‧Quick Installation Guide w w w.oring - net wo rk in g.co m Optional Accessories (Can be purchased separately) ‧DR-75-48 : 75 Watts@48VDC DIN-Rail power supply ‧DR-120-48 : 120 Watts@48VDC DIN-Rail power supply ‧SDR-240-48 : 240 Watts@48VDC DIN-Rail power supply ‧SDR-480-48 : 480 Watts@48VDC DIN-Rail power supply