RHOPOINT CRS0603 Standard chip resistor Datasheet

SRT Resistor Technology
Standard Chip Resistors
Type: CRS
Sizes: 0504, 0603, 0805, 1206
Features:
•
•
•
•
•
•
•
Chip Resistors in Thickfilm
Resistance element glass-passivated
Contact areas Nickel-barrier / matte tin
RF-versions untrimmed
Resistance values up to 500 MΩ
Working voltage up to 600 Volts
Suitable for high vacuum applicatons – no organics
Dimensions:
Size
L
B
+0.15/-0.05
1.0
D
+0.15/-0.05
0.3
C
+0.15/-0.05
0.2 +0.2/-0.1
0504
1.25
0603
1.5 +0.15/-0.05
0.8 +0.15/-0.05
0.4 +0.15/-0.05
0.2 +0.2/-0.1
0805
2.0 +0.15/-0.05
1.25 +0.15/-0.05
0.4 +0.15/-0.05
0.3 +0.2/-0.1
1206
3.2 +0.15/-0.05
1.5 +0.2/-0.05
0.4 +0.15/-0.05
0.3 +0.2/-0.1
B
D
L
L = Length, B = Width, D = Thickness, C = Width of wrap around (in mm)
Larger sizes on request
C
Packaging:
Bulk in plastic bags – minimum quantity 100 pieces per value
Blistertape acc. to IEC 60286-3 – minimum 1000 pieces per value
Reel diameter 180 mm or 330 mm
Ordering Data:
Type – value – tolerance – TCR – packaging
Example: CRS 0805 100K ± 1% - TCR 100 Tape 180 mm
Untrimmed parts are indicated by the extension “NA” in the order code:
Type – value – tolerance – NA – TCR - packaging
Example: CRS 0805 100K ± 1% NA TCR 100 Tape 180 mm
If no requirements for TCR and taping are given the standard value (highest value in table) will be
supplied and packaging is bulk.
Issue 10-2007
SRT Resistor Technology GmbH
Ostlandstr. 31
D-90556 Cadolzburg
Germany
Fon:
Fax:
E-mail:
Internet:
+49 (0)9103 / 7952-0
+49 (0)9103 / 5128
[email protected]
www.srt-restech.de
SRT Resistor Technology
Standard Chip Resistors
Type: CRS
Sizes: 0504, 0603, 0805, 1206
Technical data – depending on size:
Size
0504
Power rating P70 (mW)
100
(P155 = 0 mW)
Working voltage U_, Ueff (V)
trimmed
50
untrimmed (Tol. > 5%)
150
0603
0805
1206
100
125
250
75
200
100
300
200
600
10/20%
TC250
5/10/20%
TC100/250
1/2/5/10%
TC100
1/2/5/10%
TC50/100
1/2/5/10%
TC50/100
1/…/20%
TC50/100
5/.../20%
TC100/250
5/10/20%
TC250
2/5/10/20%
TC100/250
1/2/5/10%
TC50/100
0.5/…/10%
TC50/100
0.5/…/10%
TC50/100
0.5/…/20%
TC50/100
2/.../20%
TC100/250
5/10/20%
TC250
2/5/10/20%
TC100/250
1/2/5/10%
TC50/100
0.5/…/10%
TC50/100
0.5/…/10%
TC50/100
0.5/.../20%
TC50/100
2/.../20%
TC100/250
Ranges / Tolerances /
TCR1)
0R1 – <1R
1R – <10R
10R – <100R
100R – 1M
>1M – 10M
>10M – 100M
–
5/10/20%
TC100/250
2/5/10%
TC100
1/2/5/10%
TC50/100
1/2/5/10%
TC50/100
2/5/10/20%
TC100/250
>100M – 500M
–
1)
TC 50: Temperature range + 25°C...+ 125°C
Zero-Ohm-Jumper: < 50 mOhm. TCR max. + 4000
Sizes 0805/1206 in range 1M – 100 M as special product also with TCR 25 available.
Technical data – general:
Temperature range
-55°C ... +155°C
Climatic category acc. to DIN EN 60068-1
55/155/56
Solderability acc DIN EN 60068-2-58 (lead free and lead-containing)
Max. soldering temperature acc. DIN EN 60068-2-58
250°C, 3s
260°C, 10s
Long term stability
10R – 100M
<10R / >100M
<0.5%
<1%
<0.5%
<0.25%
<0.5%
<1%
<2%
<1%
<0.5%
<1%
Storage 125°C/1000h
Storage 155°C/1000h
Load P70/70°C/1000h
Short term overload
Damp heat (56d/40°C/96%)
Data not specified according CECC 40401-802
Issue 10-2007
SRT Resistor Technology GmbH
Ostlandstr. 31
D-90556 Cadolzburg
Germany
Fon:
Fax:
E-mail:
Internet:
+49 (0)9103 / 7952-0
+49 (0)9103 / 5128
[email protected]
www.srt-restech.de
Similar pages