IQD CXOMKHT-5.0V Crystal clock oscillator specification Datasheet

Crystal Clock Oscillator Specification
CXOMKHT 5.0V
ISSUE 1; March 2016
Description
An increasing number of applications require the use of high
temperature oscillators. For these applications, IQD offers
Statek's CXOMKHT oscillator. This oscillator is designed to
operate at temperatures up to 200°C with high shock
survivability.
-HG-SM1 High Shock SM1 (Gold plated, RoHS compliant)
-HG-SM5 High Shock SM5 (Solder dipped, RoHS compliant)
-SM1 SM1 (Gold plated, RoHS compliant)
-SM5 SM5 (Solder dipped, RoHS compliant)
FEATURES:
High temperature operation up to 200°C
Excellent stability over temperature
Fast start-up
High shock resistance
CMOS and TTL compatible
Optional output enable/disable
Low EMI emission
Hermetically sealed ceramic package
APPLICATIONS:
Industrial Downhole instrumentation
Rotary shaft sensors
Underground boring tools
Please note that all data is only valid at 25°C unless otherwise
stated.
Outline (mm) -SM1 = SM1 (Gold plated, RoHS
compliant)
Frequency Parameters
200.0kHz to 70.0MHz
Frequency
±50.00ppm
Frequency Tolerance
Tolerance Condition
@ 25°C
±100.00ppm to ±200.00ppm
Frequency Stability
Ageing
±5ppm max in 1st year @ 25°C
Ageing: ±100pm max @ 200°C
Operable Temperature Range: -55 to 200°C
(Expected life at 200°C is in excess of 1500 hours)
Electrical Parameters
5.0V ±10%
Supply Voltage
Supply Current (typ):
24MHz - 8mA
32MHz - 10mA
65MHz - 16mA
Absolute Maximum Supply Voltage: -0.5V to 7.0V
Operating Temperature Ranges
25 to 150°C
25 to 175°C
25 to 200°C
Output Details
Output Compatability
Drive Capability
CMOS
15pF
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 28 Apr 16 15:03 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 1 of 3
Crystal Clock Oscillator Specification
CXOMKHT 5.0V
Output Control
Enable/Disable (EN):
Logic 1 to pad 1, output enabled
Logic 0 to pad 1, output disabled, output goes to high
impedance state, internal oscillator stops, therefore current
consumption is very low but output recovery is delayed.
No Connection (NC): Pad 1 No Connection
Tri State (TS):
Logic 1 to pad 1, output enabled
Logic 0 to pad 1, output disabled, output goes to high
impedance state, internal oscillator continues to function,
therefore current consumption is lower than normal but output
recovery is immediate.
Start Up Time: 5ms max
Environmental Parameters
Shock:
Standard version: 3000G, 0.3ms, 1/2 sine
High Shock version (HG): 10000G, 0.3ms, 1/2 sine
Vibration: MIL-STD-202G, Method 204D, Condition D: 20G,
10-2000Hz swept sine
Storage Temperature Range: -55 to 125°C
Manufacturing Details
Maximum Process Temperature: 260°C (20secs max)
Ordering Information
Frequency*
Model*
Shock Option*
Termination Variant*
Output
Frequency Tolerance (@ 25°C)*
Frequency Stability (over operating temperature range)*
Operating Temperature Range*
Supply Voltage
Pad 1 Function*
(*minimum required)
Shock Options:
Blank = Standard Shock
-HG = High Shock
Termination Variants:
SM1 = Gold Plated
SM5 = Solder Dipped
Note: non-RoHS compliant terminations are available - please
contact an IQD Sales Office
Pad 1 Function Options:
EN = Enable/Disable
NC = No Connection
TS = Tri State
Example:
10.0MHz CXOMKHT SM1
CMOS ±50ppm ±175ppm 25 to 200C 5.0V TS
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Optional
Compliant
Not Applicable
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 28 Apr 16 15:03 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 2 of 3
Crystal Clock Oscillator Specification
CXOMKHT 5.0V
Packaging Details
Pack Style: Reel
Pack Size: 1,000
Tape & reel in accordance with EIA-481-D
Pack Style: Tray
Pack Size: 1
Supplied on a tray
Electrical Specification - maximum limiting values 5.0V ±10%
Frequency
Min
Frequency
Max
200.0kHz
70.0MHz
Temperature
Range
Stability
(Min)
Current
Draw
Rise and Fall
Time
Duty Cycle
°C
ppm
mA
ns
%
25 to 150
±100.0
-
10
40/60
25 to 175
±150.0
-
10
40/60
25 to 200
±175.0
-
10
40/60
This document was correct at the time of printing; please contact your local sales office for the latest version.
Click to view latest version on our website.
Sales Office Contact Details:
UK: +44 (0)1460 270200
France: 0800 901 383
Germany: 0800 1808 443
USA: +1.760.318.2824
Printed on 28 Apr 16 15:03 using Model Data Sheet V1.2550
Email: [email protected]
Web: www.iqdfrequencyproducts.com
Page 3 of 3
Similar pages