BXY42 HiRel Silicon PIN Diode T • HiRel Discrete and Microwave Semiconductor • PIN Diode for high speed switching of RF signals • Very low capacitance • Hermetically sealed microwave package • Space Qualified ESA/SCC Detail Spec. No.: 5513/017 Type Variant No.s 01 to 02 T1 ESD: Electrostatic discharge sensitive device, observe handling precautions! Type BXY42-T (ql) Marking - Ordering Code see below BXY42-T1 (ql) (ql) Quality Level: Pin Configuration Package 1 2 T 1 2 T1 P: Professional Quality, Ordering Code: Q62702X143 H: High Rel Quality, Ordering Code: on request S: Space Quality, Ordering Code: on request ES: ESA Space Quality, Ordering Code: Q62702X168 (see order instructions for ordering example) Semiconductor Group 1 of 5 Draft B, September 99 BXY42 Maximum Ratings Parameter Symbol Reverse Voltage VR 50 V Peak Forward Current 1) IFM 5 A Power Dissipation Ptot BXY42-T Values mW 2) BXY42-T1 Unit 600 3) 350 Operating Temperature Range Top -55 to +175 °C Storage Temperature Range Tstg -65 to +175 °C Tsol +250 °C Junction Temperature Tj 175 °C Thermal Resistance Junction-Case Rth(j-c) Soldering Temperature 4) K/W 200 BXY42-T 350 BXY42-T1 Notes.: 1.) At tp = 1,0µs, Duty Cycle=0,001% 2.) At TCASE = 55 °C. For TCASE > 55 °C derating is required. 3.) At TCASE = 52,5 °C. For TCASE > 52,5 °C derating is required. 4.) During 5 sec. maximum. The same terminal shall not be resoldered until 5 minutes have elapsed. Electrical Characteristics at TA=25°C; unless otherwise specified Parameter Symbol Values Unit min. typ. max. IR1 - - 10 µA IR2 - - 5 nA VF - 0,97 1,1 V DC Characteristics Reverse Current 1 VR1=50V Reverse Current 2 VR2=40V Forward Voltage IF=100mA Semiconductor Group 2 of 5 Draft B, September 99 BXY42 Electrical Characteristics (continued) Parameter Symbol Values Unit min. typ. max. CT - 0,22 0,24 pF RF1 - 2 3,5 Ω RF2 - 1 2,5 Ω τL 35 50 - ns AC Characteristics Total Capacitance VR=20V; f=1MHz Forward Resistance 1 f=100MHz, IF1=1mA Forward Resistance 2 f=100MHz, IF2=10mA Minority Carrier Lifetime IF=10mA, IR=6mA, IR=3mA Semiconductor Group 3 of 5 Draft B, September 99 BXY42 Order Instructions: Full type variant including package variant and quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level only. Ordering Form: Ordering Code: Q.......... BXY42- (x) (ql) (x): Package Variant (ql): Quality Level Ordering Example: Ordering Code: Q62702X168 BXY42-T1 ES For BXY42 in T1 Package; ESA Space Quality Level Further Informations: See our WWW-Pages: - Discrete and RF-Semiconductors (Small Signal Semiconductors) www.infineon.com/products/discrete/hirel.htm - HiRel Discrete and Microwave Semiconductors www.infineon.com/products/discrete/hirel.htm Please contact also our marketing division : Tel.: Fax.: ++89 234 24480 ++89 234 28434 e-mail: Address: [email protected] Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich Semiconductor Group 4 of 5 Draft B, September 99 BXY42 T Package B X1 A C Y1 Symbol Y2 A B C 2 1 Millimetre min max 1,30 1,45 1,15 1,35 0,40 T1 Package X1 B Y1 A Y2 Symbol C D F G A B C D E F G H 2 1 E G H Millimetre min max 1,30 1,45 1,15 1,35 0,40 0,10 0,50 0,30 0,06 0,10 5,50 0,40 0,60 Published by Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich. Infineon Technologies AG 1998. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Offices of Semiconductor Group in Germany or the Infineon Technologies Companies and Representatives woldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Infineon Technologies Office, Semiconductor Group. Infineon Technologies Semiconductors is a certified CECC and QS9000 manufacturer (this includes ISO 9000). Semiconductor Group 5 of 5 Draft B, September 99