0-10V Dimmable Constant Current Mode 45-DBFN Series FEATURES: ● AC Input 100~277Vac ● Built-in Active PFC Function ● Built-in : 24V/0.1A Max ( For Lighting Sensor ) ● Protection: SCP / OVP / OTP ● High Operating Ambient Temp.: 0℃~+50℃ ● Surge protection: Line to Line 2KV ● Safety: Meet UL / PSE ● EMI: Meet FCC / CE ● Warranty: 7 [email protected]<75℃ (refer to warranty policy) ● RoHS Compliant ● Dimming 0V-10V PRODUCT SPECIFICATION OUTPUT CURRENT(A) OUTPUT CURRENT TOLERANCE EFFICIENCY O/P NOISE(P-P,V) 12-24 1.5 ±7% 85.0% 1% Vo(max.) 12-24 1.8 ±7% 85.0% 1% Vo(max.) 40.5 15-30 1.35 ±7% 87.0% 1% Vo(max.) DBFNA040U142-00G 42 15-30 1.4 ±7% 87.0% 1% Vo(max.) DBFN0040U102-00G 36 18-36 1 ±10% 87.0% 1% Vo(max.) DBFN0040U112-00G 37.8 18-36 1.05 ±10% 87.0% 1% Vo(max.) DBFN0040U901-00G 43.2 24-48 0.9 ±10% 87.0% 1% Vo(max.) DBFN0040U701-00G 39.2 28-56 0.7 ±7% 87.0% 1% Vo(max.) DC OUTPUT POWER(W) DC OUTPUT VOLTAGE(V) DBFN0040U152-00G 36 DBFN0040U182-00G 43.2 DBFN0040U142-00G MODEL ELECTRICAL SPECIFICATION INPUT VOLTAGE RANGE 90-305Vac, 127-431Vdc, Normal: 100-277Vac INPUT FREQUENCY Range: 47-63Hz, Normal: 50-60Hz ACTIVE POWER FACTOR >0.9@Full Load 100-277Vac THD <15% at Full Load 277Vac TURN ON DELAY TIME <1S at Full Load 100-277Vac AC CURRENT 0.7A / 100Vac 0.3A/277Vac Cold Start 65A@230Vac INRUSH CURRENT (typ) LEAKAGE CURRENT <0.75mA at 277Vac SHORT CIRCUIT PROTECTION OVER VOLTAGE PROTECTION SCP , OVP , OTP will restart automatically after the fault condition is removed OVER TEMP. PROTECTION OPERATING TEMP. 0℃~+50℃@Full Load 120-277Vac STORAGE TEMP. -20℃~+80℃ 10% to +90%, non-cond. RELATIVE HUMIDITY SAFETY Meet UL 8750 / PSE EMI Meet FCC Part15 / Meet EN 55015 WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P：4242VDC, I/P-FG：2121VDC I/P-O/P, I/P-FG,O/P-FG :10M Ohms / 500VDC / 25℃ / 70% RH DIMENSION (L*W*H) 372 * 30 * 27 mm【14.6 * 1.18 * 1.06 inch】 (1) All parameters not specially mentioned are measured 230VAC input. (2) All specifications Typical @25℃, unless otherwise noted, at normal line and load. (3) Ripple and Noise measured directly at pins/terminals at nom. load, 0.1uF bypass and 47uF electrolytic, pk-pk @20MHz bandwidth. (4) Specified for free-air convection cooling. (5) Minimum load is NOT required for proper operation . (6) 100% Production Tested. ＊REFERENCE: www.linkcom.com.tw ＊Please contact [email protected], [email protected] for more information Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw 45-DBFN Series 0-10V Dimmable Constant Current Mode DIMENSIONS Wiring Digram Line Dim+ DimLED + LEDLoad+ Load- ＊REFERENCE: www.linkcom.com.tw Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw 0-10V Dimmable Constant Current Mode 45-DBFN Series DIMMING OPERATION Parameters Minimum Typical 1V ─ 10V 0mA ─ 1mA Absolute maximum voltageon on the 0-10(+) Purple Wire Source current on the 0-10V(+) Purple Wire Maximum Output Current / 1-10VDC Dimming Input 100.0% 90.0% Output Current % 80.0% 70.0% 60.0% 50.0% 40.0% 30.0% 20.0% 10.0% 0.0% 0 1 2 3 4 5 6 7 8 9 10 Dimming Input(VDC) Notes: 1. Dim+ and Dim- wires on the output side are used for 1-10V dimming. 2. Recommended dimmers are Leviton IP710,Lutron NTSTV-DV or equivalent. 3. When dimming wires are open, the output current will be at 100%. Linkcom Manufacturing Co., Ltd. 5F., No. 127, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231-45, Taiwan ▪ T: +886-2-8919-1380 ▪ F: +886-2-8919-1370 ▪ www.linkcom.com.tw