2.0x1.25mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHCM2012VGC/Z-F01 GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 2.0X1.25mm SMT LED,0.5mm MAX.THICKNESS. The Green source color devices are made with InGaN z LOW POWER CONSUMPTION. on SiC Light Emitting Diode. z WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. z IDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic z VARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. z PACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically z MOISTURE SENSITIVITY LEVEL : LEVEL 3. grounded. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3755 REV NO: V.2 DATE: JUL/31/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203005803 Selection Guide Dice Part No. APHCM2012VGC/Z-F01 GREEN (InGaN) Iv (mcd) [2] @ 20mA Lens Type Viewing Angle [1] Min. Typ. 2 θ 1/2 180 500 110 ° WATER CLEAR Notes: 1. θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15% Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 4.0 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1. Wavelength: +/-1nm 2. Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Green Units 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3755 REV NO: V.2 DATE: JUL/31/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203005803 Green APHCM2012VGC/Z-F01 SPEC NO: DSAH3755 REV NO: V.2 DATE: JUL/31/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203005803 APHCM2012VGC/Z-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH3755 REV NO: V.2 DATE: JUL/31/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203005803 PACKING & LABEL SPECIFICATIONS APHCM2012VGC/Z-F01 SPEC NO: DSAH3755 REV NO: V.2 DATE: JUL/31/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203005803