Spec Sheet PrintPDF FBAR/SAW Devices (SAW Duplexers) D6DA1G842K2C4 Features Item Summary SAW, Duplexer, 1.8x1.4x0.6mm Band 3 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions LTE Dimension L 1.8 + 0/- 0.20 mm Type SAW Dimension W 1.4 + 0/- 0.20 mm Function Duplexer Dimension T Max 0.6 mm band Band 3 Insertion Loss (typ) 2.3/2.1 dB System (Tx-ANT/ANT-Rx) Isolation (typ) 56/56 dB Operating Temp. Range -20 to +85 ℃ RoHS2 Compliance (10 subst.) Yes REACH Compliance (168 subst.) Yes Soldering Reflow 2016.11.21 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC Table 1. (MHz) Insertion loss 1710.15~1784.85 Ripple 1710.15~1784.85 VSWR Tx to Tx Ant Input Power Ant Ant to Specification 1710.15~1784.85 Unit Remarks 3.0 dB(*1) -20oC~ +65oC - 3.3 dB(*1) +65oC~ +85oC - 1.6 2.8 dB - 1.4 2.0 - - 1.4 2.0 - Min Typ. Max - 2.3 - +29dBm,Ta=+50℃ 5000h,CW dBm 1559~1586 36 44 - dB Compass,GPS 1597~1606 33 43 - dB GLONASS Absolute 1805~1880 40 52 - dB Rx attenuation 2400~2500 33 39 - dB ISM 3420~3570 25 32 - dB 2f0 5130~5355 20 30 - dB 3f0 - 2.1 2.9 dB(*1) 0oC~ +85oC - - 3.3 dB(*1) -20oC~ 0oC - 1.4 2.8 dB - 1.6 2.3 - - 1.5 2.2 - 1710~1785 50 54 - dB Tx Absolute 2400~2500 42 45 - dB ISM attenuation 3610~3760 47 57 - dB 2f0 5415~5640 42 49 - dB 3f0 1710.15~1784.85 50 56 - dB Tx 46 - - dB 50 56 - dB Insertion loss 1805.15 ~1879.85 Ripple 1805.15 ~1879.85 VSWR Ant Rx Rx Tx to 1710.15~1784.85 Final Electrical Specification Condition Item May 31, 2016 Isolation Rx Terminating Impedance 1805.15 ~1879.85 1805.15 ~1879.85 Tx port 50 //10nH Ω Rx port 50 //12nH Ω Ant port 50 //4.3nH Ω -20 to +85 oC Operating Temperature Maximum DC in all ports - - 3 Rx -20oC~ 0oC +0 oC~ +85oC VDC DC impedance to ground 100 MΩ Device size (L typ. x W typ. x H max.) 1.8 x 1.4 x 0.6 mm (*1) Specification of insertion loss excludes loss that comes from the test board. Rx Device only Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC May 31, 2016 Final Dimensions 0.42mmMax 0.6mm < Top View > < Side View > < Bottom View > Pin assignment Pin No. Pin name Description 1 Rx Receiver 2 GND Ground 3 Tx Transmitter 4 GND Ground 5 GND Ground 6 ANT Antenna 7 GND Ground 8 GND Ground Figure 1. Dimensions and Pin assignment Unit: mm Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC May 31, 2016 Final Evaluation Circuit Ant (50ohm) L=4.3nH (Q= ∞) 6 Tx(50ohm) Rx(50ohm) L=12nH (Q= ∞) 1 2,4,5, 3 7,8 L=10nH (Q= ∞) GND 1~8 : Pin No. Recommended foot print pattern Figure 2. Recommended foot print pattern Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC Tx to Ant Ant to Rx Figure 3-1. Electrical Characteristics These data exclude loss that comes from the test board. May 31, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC Tx to Ant, Ant to Rx Tx to Rx Isolation Figure 3-2. Electrical Characteristics These data exclude loss that comes from the test board. May 31, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC Tx Port Figure 3-3. Electrical Characteristics May 31, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC Rx Port Figure 3-4. Electrical Characteristics May 31, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC Ant Port Figure 3-5. Electrical Characteristics May 31, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC Tx to Ant (Wide span) Ant to Rx (Wide span) Figure 3-6. Electrical Characteristics May 31, 2016 Final Pb Pb-free MSL1 * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC Tx to Rx Isolation(Wide span) Figure 3-7. Electrical Characteristics May 31, 2016 Final Pb MSL1 Pb-free * Pb Free Part Customer Name Standard System Band 3 Duplexer Date Part Number D6DA1G842K2C4 Version 7.1ffC May 31, 2016 Final Ordering Code Ordering Code Packing Reel size Status D6DA1G842K2C4-Z Tape & Reel 3,000 pcs. MP D6DA1G842K2C4-ZA Tape & Reel less than 3,000 pcs. MP D6DA1G842K2C4-Y Tape & Reel 15,000 pcs. MP D6DA1G842K2C4-YA Tape & Reel less than 15,000 pcs. MP D6DA1G842K2C4-Q Bulk few pcs. MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives. *MP : Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact TAIYO YUDEN Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. This product is for general electronics equipment such as Audio-Visual equipment, household electronics, office supplies, information services and telecommunications; therefore, in case this product is used for any medical equipment, space equipment, nuclear equipment or disaster prevention equipment, please contact TAIYO YUDEN in advance. In case this product is used for general electronics equipment or circuits which require high safety and high reliability, thoroughly evaluate on safety and add a protection circuit if necessary.