Skyworks AS169-73LF Phemt gaas ic spdt switch 300 khz-2.5 ghz Datasheet

DATA SHEET
AS169-73, AS169-73LF: PHEMT GaAs IC SPDT Switch
300 kHz–2.5 GHz
Applications
Pin Out
General-purpose medium-power switches in
telecommunication applications
● T/R switches in 802.11b, g WLAN BluetoothTM systems
●
6
5
4
P1 dB 30 dBm typical @ 3 V
IP3 52 dBm typical
● Low insertion loss (0.3 dB @ 0.9 GHz)
● Low DC power consumption
● Ultraminiature low-cost SOT-6 plastic package
● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
per JEDEC J-STD-020
V2
CBL
3
J2
2
CBL
GND
Features
1
J3
CBL
J1
V1
●
●
DC blocking capacitors (CBL) must be supplied externally for positive voltage operation.
CBL = 100 pF for operation >500 MHz.
Description
The AS169-73 is an IC FET SPDT switch in a low-cost SOT-6
plastic package. The AS169-73 features low insertion loss and
positive voltage operation with very low DC power consumption.
This general-purpose switch can be used in a variety of
telecommunications applications.
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
Electrical Specifications at 25 °C
Z0 = 50 Ω, VCTL = 0/3 V unless otherwise noted
Parameter
Frequency
Insertion loss(1)
300 kHz–1.0 GHz
300 kHz–2.5 GHz
Isolation
300 kHz–1.0 GHz
300 kHz–2.5 GHz
VSWR(2)
300 kHz–1.0 GHz
300 kHz–2.5 GHz
Min.
22
21
Typ.
Max.
Unit
0.3
0.4
0.4
0.5
dB
dB
25
24
1.15:1
1.3:1
dB
dB
1.25:1
1.4:1
1. Insertion loss changes by 0.003 dB/°C.
2. Insertion loss state.
BUY
NOW
Innovation to GoTM
Now available for purchase online.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200105 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
1
DATA SHEET • AS169-73, AS169-73LF
Operating Characteristics at 25 °C (0, 3 V)
Z0 = 50 Ω, VCTL = 0/3 V unless otherwise noted
Parameter
Condition
Switching characteristics
Rise, fall time
On, off time
Video feedthru
Frequency
Min.
Typ.
10/90% or 90/10% RF
50% CTL to 90/10% RF
TRISE = 1 ns, BW = 500 MHz
Max.
Unit
25
35
10
ns
ns
mV
Input power for 1 dB compression
VCTL = 0/3 V
VCTL = 0/5 V
0.5–2.5 GHz
0.5–2.5 GHz
30
34
dBm
dBm
Intermodulation intercept point (IP3)
For two-tone input power 5 dBm
VCTL = 0/3 V
VCTL = 0/5 V
0.5–2.5 GHz
0.5–2.5 GHz
43
50
dBm
dBm
25
°C/W
Thermal resistance
ESD rating
Human body model (Class 1A)
Control voltages
VLOW = 0 to 0.2 V @ 20 µA max.
VHIGH = 3 V @ 100 µA max. to 5 V @ 200 µA max.
Typical Performance Data (0, 3 V)
1.0
50
45
40
Isolation (dB)
Insertion Loss (dB)
0.8
0.6
0.4
35
30
25
20
0.2
15
0
10
0
0.5
1.0
1.5
2.0
2.5
3.0
0
0.5
1.0
1.5
2.0
2.5
Frequency (GHz)
Frequency (GHz)
Insertion Loss vs. Frequency
Isolation vs. Frequency
1.3
VSWR
1.2
1.1
1.0
0
0.5
1.0
1.5
2.0
2.5
3.0
Frequency (GHz)
VSWR vs. Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
June 8, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200105 Rev. E
3.0
DATA SHEET • AS169-73, AS169-73LF
Truth Table
Absolute Maximum Ratings
V1
V2
J1–J2
J1–J3
VHIGH
VLOW
Isolation
Insertion loss
VLOW
VHIGH
Insertion loss
Isolation
All other conditions not recommended.
3 V ≤ VHIGH ≤ 5 V, 0 V ≤ VLOW ≤ 0.2 V.
Value
6 W > 500 MHz
0/7 V control
Control voltage
-0.2 V, +8 V
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +150 °C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
Recommended Solder Reflow Profiles
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Tape and Reel Information
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
SOT-6
0.074
(1.90 mm) Ref.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce potentials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
0.126 (3.20 mm)
0.087 (2.20 mm)
Pin 6
0.071 (1.80 mm)
0.052 (1.30 mm)
Pin 1
Indicator
Pin 1
0.037 (0.95 mm) Ref.
0.020 (0.51 mm)
0.014 (0.350 mm)
0.006
(0.15 mm)
0.000
(0.00 mm)
Characteristic
RF input power
0.057 (1.45 mm)
0.035 (0.90 mm)
5.0° ± 1°
5.0° ± 1°
0.122 (3.10 mm)
0.106 (2.70 mm)
0.012
(0.30 mm)
Typ.
0.014
(0.26 mm)
0.004
(0.10 mm)
0.022 (0.61 mm)
0.004 (0.10 mm)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200105 Rev. E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
3
DATA SHEET • AS169-73, AS169-73LF
Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
June 8, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200105 Rev. E
Similar pages