POWER AEE Series 40 Watts Data Sheet Total Power: 40 Watts Input Voltage: 12 V, 24 V or 48 V # of Outputs: Single, Dual SPECIAL FEATURES Encapsulated Wide 4:1 input range 1” x 2” DIP package 1500 Vdc I/O isolation Single and Dual output OCP, OVP, OTP protection Electrical Specifications Input Remote On/Off Input range 9 to 36 Vdc; 18 to 75 Vdc High efficiency - 91% Efficiency 90% @ 5 Vo Operating temp. range –40°C to +85 °C (with derating) Output SAFETY 2 Voltage tolerance ±1.0% Line regulation ±0.5% Load regulation Single output: ±0.5% Dual output: ±1.0% Noise/ripple 3.3 Vo, 5 Vo: 100 mV Others: 150 mV OCP and S/C protection Hiccup Over voltage protection Latched OTP protection Latched Switching frequency 24 Vdc: 286 KHz Others: 320 KHz Temperature coefficient ±0.02 /°C UL/cUL 60950-1 (CSA) IEC/EN 60950-1 Isolation I/O isolation 1500 Vdc min. Insulation resistance 1000 Mohm Insulation capacitance 1500 pF Environmental Specifications Operating ambient temperature range -40 °C to +85 °C Storage temperature -50 °C to +125 °C Humidity 5% to 95% (non-condensing) Calculated MTBF 328 Khrs AEE Series Data Sheet Mechanical Drawings 10.16 [0.40] 5.08 [0.20] Pin Connectors 1.00 [ 0.04] 1 3.6 [0.14] Bottom View 50.8 [2.00] 2 45.72 [1.80] 3 Pin No. Single Output Dual Output 1 +Vin +Vin 2 -Vin -Vin 3 Remote On/Off Remote On/Off 4 +Vout +Vout 5 -Vout Common 6 Trim -Vout T: 11.0 mm (0.43 inch) for 24 V Output Models T: 10.2 mm (0.40 inch) for Other Output Models • All dimensions in mm (inches) • Tolerance: X.X±0.25 (X.XX±0.01) X.XX±0.13 ( X.XXX±0.005) • Pin diameter Ø 1.0 ±0.05 (0.04±0.002) 1.1 [0.04] 5 6 10.16 [0.40] 4 10.16 [0.40] 2.54 [0.10] 5.5 [0.22] T 25.4 [1.00] Physical Characteristics Case Size (24 V Output) 50.8 x 25.4 x 11 mm (2.0 x 1.0 x 0.43 inches) Case Size (Other Output) 50.8 x 25.4 x 10.2 mm (2.0 x 1.0 x 0.40 inches) Case Material Aluminium Alloy, Black Anodized Coating Base Material FR4 PCB (flammability to UL 94V-0 rated) Pin Material Copper Alloy with Gold Plate Over Nickel Subplate Weight 30 g Ordering Information Input Voltage Output 1 Voltage AEE08F18-L Model Number 9 - 36 V 3.3 V @ 8 A 26.4 W AEE08A18-L 9 - 36 V 5V@8A 40 W AEE03B18-L 9 - 36 V 12 V @ 3.33 A 40 W AEE02C18-L 9 - 36 V 15 V @ 2.67 A 40 W AEE01H18-L 9 - 36 V 24 V @ 1.67 A 40 W AEE01BB18-L 9 - 36 V 12 V @ 1.67 A -12 V @ 1.67 A 40 W AEE01CC18-L 9 - 36 V 15 V @ 1.33 A -15 V @ 1.33 A 40 W AEE08F36-L 18 - 75 V 3.3 V @ 8 A 26.4 W AEE08A36-L 18 - 75 V 5V@8A 40 W AEE03B36-L 18 - 75 V 12 V @ 3.33 A 40 W AEE02C36-L 18 - 75 V 15 V @ 2.67 A 40 W AEE01H36-L 18 - 75 V 24 V @ 1.67 A 40 W AEE01BB36-L 18 - 75 V 12 V @ 1.67 A -12 V @ 1.67 A 40 W AEE01CC36-L 18 - 75 V 15 V @ 1.33 A -15 V @ 1.33 A 40 W To order the converter with heatsink, please add a suffix –HS (e.g. AEE08F18-LHS) to order code. Output 2 Voltage Maximum Power AEE Series Data Sheet Mechanical Drawings Heatsink (Option –HS) The advantages of adding a heatsink are: 31.1[1.22] 1. To help heat dissipation and increase the stability and reliability of DC/DC converters at high operating temperature atmosphere. 2. To upgrade the operating temperature of DC/DC converters, please refer to Derating Curve. 17.2[0.68]Max 31.0[1.22]Max Physical Characteristics Heat-sink Thermal pad C lamp Heatsink Material: Aluminum Finish: Black Anodized Coating Weight: 9g Notes: 1. All specifications are subject to change without notice. Mechanical drawings are for reference only. 2. Warranty: 3 yr 3. Label and logo appearance may vary from what is shown on mechanical drawings. C onverter WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] AEE40W DS Rev. 01-30-15