Delta DVCH2812D/HB-XXX High reliability hybrid dc-dc converter Datasheet

DVCH2800D Series
HIGH RELIABILITY HYBRID
DC-DC CONVERTERS
DESCRIPTION
FEATURES
The DVCH series of high reliability DC-DC
converters is operable over the full military (-55 °C to
+125 °C) temperature range with no power derating.
Unique to the DVCH series is a magnetic feedback
circuit that is radiation immune. Operating at a
nominal fixed frequency of 400 kHz, these regulated,
isolated units utilize well controlled undervoltage
lockout circuitry to eliminate slow start-up problems.
•
•
•
These converters are designed and manufactured in
a facility qualified to ISO9001 and certified to MILPRF-38534 and MIL-STD-883.
This product may incorporate one or more of the
following U.S. patents:
5,784,266
5,790,389
5,963,438
5,999,433
6,005,780
6,084,792
6,118,673
•
•
•
•
•
•
•
•
•
•
•
•
•
•
High Reliability
Very Low Output Noise
Wide Input Voltage Range: 12 to 50 Volts per
MIL-STD-704
Up to 1.5 Watts Output Power
Radiation Immune Magnetic Feedback Circuit
NO Use of Optoisolators
Undervoltage Lockout
Indefinite Short Circuit Protection
Current Limit Protection
Industry Standard Pinout
High Input Transient Voltage: 80 Volts for 1 sec
per MIL-STD-704A
Precision Projection Welded Hermetic Package
High Power Density: > 7 W/in3
Custom Versions Available
Additional Environmental Screening Available
Meets MIL-STD-461C and MIL-STD-461D EMC
Requirements When Used With a DVMSA28
EMI Filter
MIL-PRF-38534 Element Evaluated
Components
Figure 1 – DVCH2800D DC-DC Converter
(Not To Scale)
1X052DSB
11314 4th Avenue
West, Suite 206
Everett, WA 98204
http://www.vpt-inc.com
Sales Information:
Phone: (425) 353-3010
Fax: (425) 353-4030
E-mail: [email protected]
1
DVCH2800D Series
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, 1 second)
Output Power1
Power Dissipation (Full Load, TCASE = +125°C)
Parameter
50 VDC
80 Volts
1.5 Watts
0.6 Watts
Junction Temperature Rise to Case
Storage Temperature
Lead Solder Temperature (10 seconds)
Weight (Maximum)
DVCH2805D
Conditions
Min
Typ
+5°C
-65°C to +150°C
270°C
11 Grams
DVCH2812D
Units
Max
Min
Typ
Max
STATIC
Continuous
INPUT
4
Voltage
Current
Ripple Current
Inhibit Pin Input
12
28
50
12
28
50
V
Transient, 1 sec
-
-
80
-
-
80
V
Inhibited
-
-
3.5
-
-
3.5
mA
No Load
-
-
10
-
-
12
mA
Full Load, 20Hz to 10MHz
-
-
30
-
-
30
mAp-p
4
Inhibit Pin Open Circuit Voltage
4
UVLO Turn On
OUTPUT
Voltage
Current
3
-
1.5
0
-
1.5
V
9.0
11.0
8.0
9.0
11.0
V
6.5
-
11.5
6.5
-
11.5
V
±VOUT
TCASE = 25°C
4.95
5.00
5.05
11.88
12.0
12.12
V
±VOUT
TCASE = -55°C to +125°C
4.80
5.00
5.20
11.52
12.0
12.48
V
Total
3
Power
0
8.0
0
-
1.5
0
-
1.5
W
±VOUT
Either Output
0
-
1.2
0
-
1.2
W
IOUT
Either Output
0
-
0.24
0
-
.1
A
Ripple Voltage
±VOUT
Full Load, 20Hz to 10MHz
-
-
50
-
-
100
mVp-p
Line Regulation
±VOUT
VIN = 12V to 50V
-
-
150
-
-
150
mV
Load Regulation
±VOUT
10% Load to Full Load
-
-
400
-
-
700
mV
Load Regulation
±VOUT
50% Load to Full Load
-
-
250
-
-
250
mV
72
79
-
74
79
-
%
EFFICIENCY
LOAD FAULT POWER DISSIPATION
Overload
4
Short Circuit
4
CAPACITIVE LOAD
SWITCHING FREQUENCY
ISOLATION
500 VDC
MTBF (MIL-HDBK-217F)
AIF @ TC = 55°C
-
-
3
-
-
3
W
-
-
4
-
-
4.5
W
-
-
500
-
-
200
µF
kHz
325
400
475
325
400
475
100
-
-
100
-
-
MΩ
-
841
-
-
841
-
kHrs
-
100
300
-
100
300
mVPK
DYNAMIC
Load Step Output Transient
±VOUT
2
Load Step Recovery
Line Step Output Transient
4
±VOUT
2, 4
Line Step Recovery
Turn On Delay
Turn On Overshoot
Notes:
±VOUT
Half Load to Full Load
VIN = 12V to 50V
VIN = 0V to 28V
1. Dependant on output voltage.
3. Derate linearly to 0 at 135°C.
1X052DSB
-
200
500
-
100
400
µSec
-
200
400
-
300
600
mVPK
-
400
600
-
300
600
µSec
-
15
20
-
15
20
mSec
-
0
25
-
0
50
mVPK
2. Time for output voltage to settle within 1% of its nominal value.
4. Verified by qualification testing.
2
DVCH2800D Series
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, 1 second)
Output Power1
Power Dissipation (Full Load, TCASE = +125°C)
Parameter
50 VDC
80 Volts
1.5 Watts
0.6 Watts
Junction Temperature Rise to Case
Storage Temperature
Lead Solder Temperature (10 seconds)
Weight (Maximum)
DVCH2815D
Conditions
+5°C
-65°C to +150°C
270°C
11 Grams
Units
Min
Typ
Max
STATIC
Continuous
INPUT
4
Voltage
Current
Ripple Current
Inhibit Pin Input
12
28
50
V
Transient, 1 sec
-
-
80
V
Inhibited
-
-
3.5
mA
No Load
-
-
14
mA
Full Load, 20Hz to 10MHz
-
-
30
mAp-p
4
Inhibit Pin Open Circuit Voltage
4
UVLO Turn On
OUTPUT
Voltage
Current
3
-
1.5
V
9.0
11.0
V
6.5
-
11.5
V
±VOUT
TCASE = 25°C
14.85
15.0
15.15
V
±VOUT
TCASE = -55°C to +125°C
14.40
15.0
15.60
V
Total
3
Power
0
8.0
0
-
1.5
W
±VOUT
Either Output
0
-
1.2
W
IOUT
Either Output
0
-
0.08
A
Ripple Voltage
±VOUT
Full Load, 20Hz to 10MHz
-
-
100
mVp-p
Line Regulation
±VOUT
VIN = 12V to 50V
-
-
150
mV
Load Regulation
±VOUT
10% Load to Full Load
-
-
700
mV
Load Regulation
±VOUT
50% Load to Full Load
-
-
250
mV
74
79
-
%
W
EFFICIENCY
LOAD FAULT POWER DISSIPATION
Overload
4
Short Circuit
4
CAPACITIVE LOAD
SWITCHING FREQUENCY
ISOLATION
500 VDC
MTBF (MIL-HDBK-217F)
AIF @ TC = 55°C
-
-
3
-
-
4.5
W
-
-
200
µF
kHz
325
400
475
100
-
-
MΩ
-
841
-
kHrs
-
100
300
mVPK
DYNAMIC
Load Step Output Transient
±VOUT
2
Load Step Recovery
Line Step Output Transient
4
±VOUT
2, 4
Line Step Recovery
Turn On Delay
Turn On Overshoot
Notes:
±VOUT
Half Load to Full Load
VIN = 12V to 50V
VIN = 0V to 28V
1. Dependant on output voltage.
3. Derate linearly to 0 at 135°C.
1X052DSB
-
100
400
µSec
-
300
600
mVPK
-
300
600
µSec
-
15
20
mSec
-
0
50
mVPK
2. Time for output voltage to settle within 1% of its nominal value.
4. Verified by qualification testing.
3
DVCH2800D Series
BLOCK DIAGRAM
PIN 1
PIN 3
D1
T1
+V OUT
28V IN
L1
C2
C1
OUT COM
IN COM
PIN 4
C3
PIN 2
Q1
-VOUT
D2
UNDER
VOLTAGE
SHUTDOWN
PWM
CONTROL
PRIMARY
HOUSEKEEPING
SUPPLY
VOLTAGE
AMPLIFIER
PIN 6
Rs1
INH
PIN 7
Figure 2
CONNECTION DIAGRAM
1
3
28V IN
28 Vdc
+
-
+V OUT
LO AD
7
4
INH
OUT COM
LO AD
2
6
IN COM
-V OUT
Figure 3
1X052DSB
4
DVCH2800D Series
INHIBIT DRIVE CONNECTION DIAGRAMS
28V IN
28V IN
1
1
12K
INH
7
OPTIONAL
CAPACITOR
IN COM
12K
OPTOISOLATOR
BIAS
INH
7
BIAS
OPTIONAL
CAPACITOR
12V
2
IN COM
12V
2
Figure 4 – Internal Inhibit Circuit and Recommended Drive
Figure 5 – Isolated Inhibit Drive
(Shown with optional capacitor for turn-on delay)
(Shown with optional capacitor for turn-on delay)
EMI FILTER HOOKUP DIAGRAM
DVMSA28 EMI FILTER
1
DVCH2800D DC-DC CONVERTER
2,3
28V IN
1
28V OUT
3
28V IN
+V OUT
LOAD
28 Vdc
7
+
-
4
INH
OUT COM
LOAD
7
5,6
IN COM
2
OUT COM
4,8
6
IN COM
CASE
-V OUT
5
Figure 6 – Converter with EMI Filter
1X052DSB
5
DVCH2800D Series
EFFICIENCY PERFORMANCE CURVES (TCASE = 25°C, Full Load, Unless Otherwise Specified)
VIN = 28V
VIN = 40V
90
80
80
70
70
Output Pow er (W)
1.5
1.3
1.1
0.1
1.5
1.3
1.1
0.9
30
0.7
30
0.5
40
0.3
40
0.9
50
0.7
50
60
0.5
60
0.3
Efficiency (%)
90
0.1
Efficiency (%)
VIN = 16V
Output Pow er (W)
Figure 7 – DVCH2805D
Figure 8 – DVCH2812D
Efficiency (%) vs. Output Power (W)
Efficiency (%) vs. Output Power (W)
90
Efficiency (%)
80
70
60
50
40
1.5
1.3
1.1
0.9
0.7
0.5
0.3
0.1
30
Output Pow er (W)
Figure 9 – DVCH2815D
Efficiency (%) vs. Output Power (W)
1X052DSB
6
DVCH2800D Series
EMI PERFORMANCE CURVES
(TCASE = 25°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
Figure 10 – DVCH2800D without EMI Filter
Figure 11 – DVCH2800D with EMI Filter
1X052DSB
7
DVCH2800D Series
PACKAGE SPECIFICATIONS
TOP VIEW
SIDE VIEW
PIN
FUNCTION
1
28V IN
2
IN COM
3
+V OUT
4
OUT COM
5
CASE
6
-V OUT
7
INHIBIT
BOTTOM VIEW
Figure 12 – Package and Pinout
(Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X052DSB
8
DVCH2800D Series
PACKAGE PIN DESCRIPTION
Pin
Function
Description
1
28V IN
Positive Input Voltage Connection
2
IN COM
Input Common Connection
3
+V OUT
Positive Output Voltage Connection
4
OUT COM
Output Common Connection
5
CASE
Case Connection
6
-V OUT
Negative Output Voltage Connection
7
INHIBIT
Logic Low = Disabled Output. Connecting the inhibit pin to input common causes
converter shutdown.
Logic High = Enabled Output. Unconnected or open collector TTL.
1X052DSB
9
DVCH2800D Series
ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534)
Screening
MIL-STD-883
(No Suffix)
Extended
/ES
HB
/HB
Class H
/H
Class K
/K
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard
NonDestructive
Bond Pull
Method 2023
•
Internal
Visual
Method 2017, 2032
Internal Procedure
•
Temperature
Cycling
Method 1010, Condition C
Method 1010, -55°C to 125°C
•
Constant
Acceleration
Method 2001, 3000g, Y1 Direction
Method 2001, 500g, Y1 Direction
•
PIND
Method 2020, Condition A2
•
Pre Burn-In
Electrical
100% at 25°C
•
Burn-In
Method 1015, 320 hours at +125°C
Method 1015, 160 hours at +125°C
96 hours at +125°C
24 hours at +125°C
•
Final
Electrical
MIL-PRF-38534, Group A1
100% at 25°C
•
Hermeticity
Method 1014, Fine Leak, Condition A
Method 1014, Gross Leak, Condition C
-3
Dip (1 x 10 )
Radiography
Method 20123
External
Visual
Method 2009
Notes:
1X052DSB
1.
2.
3.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100% R&R testing at –55°C, +25°C, and +125°C with all test data included in product shipment.
PIND test Certificate of Compliance included in product shipment.
Radiographic test Certificate of Compliance and film(s) included in product shipment.
10
DVCH2800D Series
ORDERING INFORMATION
DVCH
28
05
D
/HB
1
2
3
4
5
-
XXX
6
(1)
(2)
(3)
(4)
Product Series
Nominal Input
Voltage
Output Voltage
Number of Outputs
DVCH
1.
2.
5 Volts
12 Volts
15 Volts
05
12
15
(5)
(6)
Screening Code1,2
Additional Screening
Code
None
/ES
/HB
/H
/K
Notes:
28 Volts
28
Standard
Extended
HB
Class H
Class K
D
Dual
Contact Sales
Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products.
VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our
sole discretion unless specifically forbidden by customer contract.
Please contact your sales representative or the VPT Inc. Sales Department for more information
concerning additional environmental screening and testing, different input voltage, output voltage,
power requirement, source inspection, and/or special element evaluation for space or other higher
quality applications.
1X052DSB
11
DVCH2800D Series
SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS
Standard Microcircuit
Drawing (SMD)
DVCH2800D Series
Similar Part Number
*T.B.D.
DVCH2805D/H
*T.B.D.
DVCH2812D/H
*T.B.D.
DVCH2815D/H
Do not use the DVCH2800D Series similar part number for SMD product acquisition. It is listed for
reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD’s can
be downloaded from the DSCC website at http://www.dscc.dla.mil/programs/smcr/. The SMD number
listed above is for MIL-PRF-38534 Class H screening, standard gold plated lead finish, and no RHA
(Radiation Hardness Assurance) level. Please reference the SMD for other screening levels, lead
finishes, and radiation levels.
CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales
Department at:
Phone:
Fax:
E-mail:
(425) 353-3010
(425) 353-4030
[email protected]
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors
or omissions. The products or specifications contained herein are subject to change without notice.
1X052DSB
12
Similar pages