MWEB Series EdgeBoard Connectors Industry-Standard, Approved for Airborne Computers MWEB EdgeBoard connectors meet the requirements of MIL-DTL-55302/120 thru /123. Available with 128 or 184 contacts. Rugged Aluminum Shell and TwistPin Contacts MWEB connectors share the same design and construction as the Glenair Micro-D M83513 connector. Backplane, Daughtercard and Wired Vertical mount thru-hole motherboard connectors and straddle mount daughtercard connectors are complemented by right angle thru-hole and pre-wired I/O versions. Rugged Mil Spec Performance in a High-Density Backplane Connector System: The MWEB EdgeBoard PC Board Featuring a width of only ¼ inch (6.4 mm.), MWEB Series connectors provide highdensity in a rugged metal shell connector. Contacts are rated at 3 amps, and the DWV voltage rating is 300 volts AC RMS at 70,000 feet altitude. The two row, .050 inch (1.54 mm.) spacing is made possible by using TwistPin reverse gender contacts. Insertmolded LCP insulators are resistant to heat and chemicals. Contacts are beryllium copper with fifty microinches of gold plating. Shells are machined aluminum alloy. Hexagonal polarizing keys allow up to 36 keying options. Contact Tail .019” (0.49) Diameter Copper Wire, Solder Dipped Rigid Epoxy Potting Compound Liquid Crystal Polymer Dielectric Aluminum Shell, Electroless Nickel Plated Micro Socket Contact Aluminum Shell, Electroless Nickel Plated Liquid Crystal Polymer Dielectric TwistPin Contact Rigid Epoxy Potting Compound Contact Tail .019” (0.49) Diameter Copper Wire, Gold Plated © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-2 E-Mail: [email protected] MWEB Series EdgeBoard Connectors MWEB-128P Vertical Mount Backplane Connector MWEB-128P BACKPLANE THRU-HOLE CONNECTOR Part Number MWEB2L-128P5W4-.375 3.950 ± .015 (100.33 ± 0.38) 3.700 (93.98) .265 (6.73) 3.318 ± .003 (84.28 ± 0.08) MAX. PIN # A64 PIN # A1 .191 PIN # B64 .050 (1.27) .050 (1.27) TYP. PIN # B1 .277/.263 (7.04/6.68) .40 (10.1) ± .010 (0.25) .190/.180 (4.83/4.57) .300/.250 (7.62/6.35) B EVEN A EVEN .375/.325 (9.52/8.26) B64 B1 A64 A1 B ODD A ODD Ø .017/.021 (0.43/0.53) .075 (1.91) Ø .091/.098 (2.31/2.49) DIA 2 PLACES 3.700 (93.98) .075 (1.91) 2X Ø .096 (2.44) .275 (6.99) A5 A3 A4 A2 B5 B3 128 X Ø .040 PTH A1 .075 (1.91) B4 B1 B2 .0375 (0.96) .075 (1.91) 63 EQUAL SPACES AT .050 (1.27) (TYP) N PATTERN SHOWN IS FOR CONNECTOR MOUNTING SIDE OF PC BOARD © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-3 E-Mail: [email protected] MWEB Series EdgeBoard Connectors MWEB-128S Straddle Mount Cardedge Connector MWEB-128S STRADDLE MOUNT CARDEDGE CONNECTOR Part Number MWEB2L-128S4BS3 3.950 ± .015 (100.33 ± 0.38) 3.700 (93.98) .265 (6.73) MAX. 3.41 ± .010 (86.61 ± 0.25) PIN # B64 PIN # B1 .191 PIN # A64 .050 (1.27) .050 (1.27) TYP. PIN # A1 .250 (6.3) .465 (11.81) MAX .260/.240 (6.60/6.10) .091/.098 (2.31/2.49) DIA 2 PLACES .190 (4.83) DIA 2 PLACES .070 (1.78) .098/.091(2.49/2.31) DIA C’BORE .187 2 PLACES FOR 1/16" THICK PC BOARD .035 (0.89) .190 (4.83) DIA 2 PLACES .030 (0.76) MAX 3.700 (93.98) .091/.098 (2.31/2.49) DIA 2 PLACES .100 (2.54) MIN SOLDER .275 (6.99) .200 ± .020 (5.08 ± .51) MIN .250 (6.35) MIN .128 (3.25) MAX 63 EQUAL SPACES AT .050 (1.27) (TYP) .020/.032 (0.51/0.81) PATTERN SHOWN IS THE SAME ON BOTH SIDES OF PC BOARD © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-4 E-Mail: [email protected] MWEB Series EdgeBoard Connectors MWEB-128S Right Angle Board Connector MWEB-128S RIGHT ANGLE PCB CONNECTOR Liquid Crystal Polymer Dielectric Micro Socket Contact MWEB2L-128SBR- .125 Rigid Epoxy Potting Compound Liquid Crystal Polymer Tray, Epoxy Filled Base Part Number PC Tail Length .090 .125 .190 .250 Aluminum Shell, Electroless Nickel Plated PC Board Contact Tail .019” (0.49) Diameter Copper Wire, Solder Dipped 3.950 ± .015 (100.33 ± 0.38) 3.700 (93.98) 3.41 ± .010 (86.61 ± 0.25) .050 (1.27) TYP. PIN # A1 PIN # A64 .191 .050 (1.27) PIN # B64 PIN # B1 .265 (6.73) MAX. .25 (6.3) A64 .40 (10.2) .775 (19.69) MAX .30 (7.6) .180 ± .005 4.57 ± 0.13) B1 .091/.098 (2.31/2.49) DIA 2 PLACES A64 A1 CONNECTOR MATING FACE THIS SIDE 3.700 (93.98) .275 (6.99) .091/.098 (2.31/2.49) DIA 2 PLACES .075 (1.91) B64 B63 Ø.098/.091(2.49/2.31) DIA C’BORE .190 (4.83) 2 PLACES © 2006 Glenair, Inc. A2 A4 A63 63 EQUAL SPACES AT .050 (1.27) (TYP) B1 B3 B5 A64 TAIL LENGTH ± .015 (0.38) B2 B4 A3 A1 .075 (1.91) .075 (1.91) PATTERN SHOWN IS FOR CONNECTOR MOUNTING SIDE OF PC BOARD CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-5 E-Mail: [email protected] N MWEB Series EdgeBoard Connectors MWEB-184P Vertical Mount Backplane Connector MWEB-184P BACKPLANE THRU-HOLE CONNECTOR Part Number MWEB2L-184NP5W4-.375 5.800 ± .015 (147.32 ± 0.38) 5.550 (140.97) 5.222/5.214 (132.64/63.86) 2.775 ± .005 (70.49 ± 0.13) .265 (6.73) MAX. PIN # A92 PIN # A1 .191 PIN # B92 .050 (1.27) TYP. .050 (1.27) PIN # B1 .091/.098 (2.31/2.49) DIA 3 PLACES .400 (10.1) ± .010 (0.25) .277/.263 (7.04/6.68) .300/.250 (7.62/6.35) .375/.325 (9.52/8.26) 5.550 (140.97) 184 X Ø.040 (1.02) PTH .091/.098 (2.31/2.49) DIA 3 PLACES A47 A92 A48 B48 .017/.021 (0.43/0.53) .075 (1.91) 2.775 (70.49) .075 (1.91) .275 (6.99) A45 A3 A4 A46 B4 B46 A1 .075 (1.91) A2 B3 B45 B47 B92 .190/.180 (4.83/4.57) B1 B2 .0375 (0.96) .075 (1.91) TYP .250 (6.35) .250 (6.35) 45 EQUAL SPACES AT .050 (1.27) (TYP) PATTERN SHOWN IS FOR CONNECTOR MOUNTING SIDE OF PC BOARD © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-6 E-Mail: [email protected] MWEB Series EdgeBoard Connectors MWEB-184S Straddle Mount Cardedge Connector MWEB-184S STRADDLE MOUNT CARDEDGE CONNECTOR Part Number MWEB2L-184NS4BS3 5.800 ± .015 (147.32 ± 0.38) 5.550 (140.97) .265 (6.73) MAX. 5.33 (135.38) MAX PIN # B92 PIN # B1 .191 PIN # A92 .050 (1.27) TYP. .050 (1.27) PIN # A1 .277/.263 (7.04/6.68) .465 (11.81) MAX .091/.098 (2.31/2.49) DIA 3 PLACES 2.775 ± .005 (70.49 ± 0.13) .030 (0.76) MAX .260/.240 (6.60/6.10) .190 (4.83) DIA 3 PLACES .100 (2.54) MIN SOLDER .200 ± .020 (5.08 ± .51) MIN .070 (1.78) FOR 1/16" THICK PC BOARD 5.550 (140.97) .091/.098 (2.31/2.49) DIA 3 PLACES .250 (6.35) MIN .275 (6.99) 2.775 (70.49) .275 .275 (6.99) (6.99) .128 (3.25) MAX N 45 EQUAL SPACES AT .050 (1.27) (TYP) 45 EQUAL SPACES AT .050 (1.27) (TYP) .020/.032 (0.51/0.81) PATTERN SHOWN IS THE SAME ON BOTH SIDES OF PC BOARD © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-7 E-Mail: [email protected] MWEB Series EdgeBoard Connectors MWEB-184S Right Angle Board Connector MWEB-184S RIGHT ANGLE PCB CONNECTOR Liquid Crystal Polymer Dielectric MWEB2L-184NSBR- .125 Micro Socket Contact Base Part Number PC Tail Length .090 .125 .190 .250 .098/.091(2.49/2.31) DIA C’BORE .190 (4.83) 3 PLACES Rigid Epoxy Potting Compound Liquid Crystal Polymer Tray, Epoxy Filled Aluminum Shell, Electroless Nickel Plated PC Board Contact Tail .019” (0.49) Diameter Copper Wire, Solder Dipped TAIL LENGTH ± .015 (0.38) 5.800 ± .015 (147.32 ± 0.38) 5.550 (140.97) 5.33 (135.38) MAX PIN # A1 PIN # A92 .191 PIN # B92 PIN # B1 .050 (1.27) .265 (6.73) MAX. .050 (1.27) TYP. .25 (6.3) .775 (19.69) MAX .40 (10.2) B46 B2 B47 .30 (7.6) .180 ± .005 4.57 ± 0.13) B1 A1 B92 A2 A46 2.775 ± .005 (70.49 ± 0.13) A47 .091/.098 (2.31/2.49) DIA 3 PLACES 5.550 (140.97) 184 X Ø.040 (1.02) PTH 2.775 (70.49) A91 .091/.098 (2.31/2.49) DIA 3 PLACES A46 A48 A92 B3 B45 B47 B91 .075 (1.91) TYP B1 .075 (1.91) TYP A2 A45 A47 .075 (1.91) B2 B46 B48 B92 A3 A1 .275 (6.99) 45 EQUAL SPACES AT .050 (1.27) (TYP) .250 (6.35) .250 (6.35) 45 EQUAL SPACES AT .050 (1.27) (TYP) PATTERN SHOWN IS FOR CONNECTOR MOUNTING SIDE OF PC BOARD © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-8 E-Mail: [email protected] MWEB Series EdgeBoard Connectors MWEB Pre-Wired and Solder Cup Connectors MWEB EdgeBoard Connectors For Input/Output WireTo-Board Applications – With 128 or 184 contacts, these narrow profile factoryterminated MWEB connectors provide a space-saving I/O wire to board solution. Connector width of .25 inch (6.4 mm.) allows for high-density card slots. High Performance TwistPin Contacts Suitable for airborne avionics processors and missioncritical computers, these pre-wired connectors feature interfacial seals and backpotting for improved environmental protection. Or, choose solder cup connectors for integration into wire harnesses. HOW TO ORDER MWEB PIGTAIL CONNECTORS Series Layout Contact Type MWEB2L 128 184N P – Pin S – Socket Wire Gage (AWG) 4 6 8 0 – – – – #24 #26 #28 #30 Wire Type K – M22759/11 600 Vrms Teflon® (TFE) J – M22759/33® 600 Vrms Modified CrossLinked Tefzel (ETFE) Wire Length Inches Wire Color 1 – White 2 – Yellow 7 – Ten Color Repeating Hardware Option 18 N J P Total Length In Inches. “18” Specifies 18 Inches. – No hardware – Jackscrews – Jackposts Sample Part Number MWEB2L – 128 P – 6 K 7 – 24 N HOW TO ORDER MWEB SOLDER CUP CONNECTORS Series Layout Contact Type MWEB2L 128 184N P – Pin S – Socket Termination Type S – Solder Cup Hardware Option N J P – No hardware – Jackscrews – Jackposts Sample Part Number MWEB2L © 2006 Glenair, Inc. – 128 P CAGE Code 06324/0CA77 S N Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-9 E-Mail: [email protected] N MWEB Series EdgeBoard Connectors MWEB Hardware Kits MWEB HARDWARE KITS MWEB Jackscrew and Jackpost Kits Stainless steel jackscrew kits are stainless steel and install with roll pins. Insert the stud through the flange from the mating side, then install the knurled head from the other side and attach to stud with a roll pin. Each kit contains two studs, two heads and two retainer pins. Jackscrew Part Number (xx) Jackscrew Kit Jackpost Part Number (xx) MWEB Polarizing Keys RECEPTACLE SHELL These stainless steel pol keys meet the requirements of MIL-C-55302/124-01. (6) keying positions per end equals (36) total positions. Install with roll pins, supplied. Half-hex keys are tapped for optional #2-56 screw installation. Kit consists of (2) keys and (4) retainer pins. Part Number 080-00-00-810 RETAINING PINS (4) SUPPLIED HEX KEY (2) SUPPLIED PLUG SHELL #2-56 UNC-2A SCREW CUSTOMER FURNISHED © 2006 Glenair, Inc. CAGE Code 06324/0CA77 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com N-10 E-Mail: [email protected]