ADSL Transformer< SMD Type: CEP Series> Type: CEP912 ◆ Product Description ・10.0×10.0mm Max.(L×W),12.6mm Max. Height. ・In addition to the typical versions of parameters shown here, custom parameters are available to meet your exact requirements. ◆ Feature ・xDSL line transformer. ・Ideally used in ADSL/VDSL Central Office, SHDSL&HDSL & splitter. ・Approved by Conexant,Centillium and TI. ・RoHS Compliance. ◆ Dimensions (mm) 10.0 Max. [.394] 12.6 Max [.496] 8 5 6x2.5 [.098] 5 5 8 8 sumida 10.0 Max. [.394] Part Number Country of Origin Date code 4 1 1 4 ◆ Land Pattern (mm) 2.5 [.098] 4 1 ◆Schematics(Bottom) 7.5 [.295] 2.6 [.102] 8x0.6 [.024] Line 1 8 3 2 5 7 Chip 4 6 11.0 [.433] (A) Line 8.7 1.2 [.047] 1 8 3 5 5 7 Chip 6 4 (B) Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 ADSL Transformer< SMD Type: CEP Series> Type: CEP912 ◆ Specification Part No. Inductance (nom. µH) Turns ratio J10130 400 1.11:1 J10163 1500 2:1 J10163 1500 J10174 THD (dB) (TYP.) Insulation Application Basic ADSL CO -86 (30k,5.3V) Supplementary ADSL CO 2:1 -86 (30k,5.3V) Supplementary ADSL CO 1000 0.9:1 -75 (25k,2.9V) Basic ADSL CO J10182 1075 1.15:1 -85.6 (25k,2V) Basic ADSL CO J10183 1075 1.2:1 -87.4 (25k,2V) Basic ADSL CO J10184 1075 1.25:1 -88.1 (25k,2V) Basic ADSL CO J10187 160 0.92:1 -68 (10k,2V) Basic ADSL CO J10207 480 1.3:1 -89 (25k,4V) Supplementary ADSL CO J14110 450 2:1 -80(25k,2.0V) Supplementary VDSL J14116 470 1.33:1 -80(25K,2.0V) Supplementary VDSL J13101 3200 0.7:1 -78(5kHz 4.0Vrms) Basic J13103 3200 0.472:1 -76(5kHz 4.0Vrms) Basic J13104 3180 0.7:1 -75(5kHz 4.0Vrms) Basic J15126 16400 1:1 Splitter J15151 16000 1:1 Splitter SHDSL HDSL SHDSL HDSL SHDSL HDSL & & & Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2