® CLD-DS78 Rev 0 Product family data sheet ® Cree XLamp CXA1830 LED Table of Contents Product Description features The XLamp CXA1830 LED array • Available in 4-step and 2-step Characteristics............................... 2 expands Cree’s family of high‑flux, EasyWhite bins at 2700 K, Operating Limits............................. 2 multi‑die 3000 K, 3500 K, 4000 K and Flux Characteristics, EasyWhite 5000 K CCT Order Codes and Bins..................... 3 arrays in a smaller, easy‑to‑use platform. With XLamp lighting‑class reliability, the CXA1830’s small, uniform emitting surface enables both directional and non‑directional lighting ® • Available in ANSI white bins at 4000 K and 5000 K CCT Flux Characteristics, ANSI White Order Codes and Bins..................... 4 • Available in 70-, 80- and Relative Spectral Power Distribution.. 5 93‑minimum CRI options Electrical Characteristics.................. 5 applications including lamp retrofit • Forward voltage: 37 V Relative Luminous Flux.................... 6 and luminaire designs. Available in • 85 °C binning and Typical Spatial Distribution............... 7 characterization Performance Groups - Brightness...... 7 2‑step and 4‑step color consistency, and featuring a 14-mm optical source, the CXA1830 brings new levels of flux and efficacy to this form factor. • Maximum drive current: 1400 mA • 115° viewing angle, uniform chromaticity profile Performance Groups - Chromaticity... 8 Cree EasyWhite Bins Plotted on the 1931 CIE Color Space..................... 9 Cree ANSI White Bins Plotted on • Top-side solder connections the 1931 CIE Color Space...............10 • Thermocouple attach point Bin and Order Code Formats...........11 • NEMA SSL-3 2011 standard flux Mechanical Dimensions..................11 bins Thermal Design.............................12 www.cree.com/Xlamp Notes...........................................13 Packaging.....................................14 Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 XLamp CXA1830 LED Characteristics Characteristics Unit Viewing angle (FWHM) Minimum Typical degrees ESD withstand voltage (HBM per Mil-Std-883D) Maximum 115 V 8000 DC forward current mA 1400* Reverse current mA 0.1 Forward voltage (800 mA, 85 °C) V Forward voltage (800 mA, 25 °C) V * 37 42 Refer to the Operating Limits section. Operating Limits The maximum current rating of the CXA1830 is dependent on the case temperature (Tc) when the LED has reached thermal equilibrium under steady-state operation. Please refer to the Mechanical Dimensions section on page 11 for the location ofCXA1830 the Tc measurement point. 1500 If (mA) 1200 900 600 300 0 0 25 50 75 100 125 150 Case Temperature (°C) Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 2 XLamp CXA1830 LED Flux Characteristics, EasyWhite Order Codes and Bins (If = 800 mA, TJ = 85 °C) The following tables provide order codes for XLamp CXA1830 LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 11). Base Order Codes Min. Luminous Flux @ 800 mA CRI CCT Range Min Typ 70 75 5000 K 80 70 --- 75 4000 K 80 80 --- --- 3500 K 93 80 95 --- 3000 K 93 80 95 --- 2700 K 93 95 2-Step Order Code 4-Step Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* T4 3440 3887 U2 3680 4158 S4 2990 3379 T2 3200 3616 T4 3440 3887 CXA1830-0000-000N0HT450H CXA1830-0000-000N0HT450F T2 3200 3616 CXA1830-0000-000N00T240H CXA1830-0000-000N00T240F T4 3440 3887 U2 3680 4158 S4 2990 3379 T2 3200 3616 S4 2990 3379 CXA1830-0000-000N00S435H T2 3200 3616 CXA1830-0000-000N00T235H T4 3440 3887 CXA1830-0000-000N00T435H CXA1830-0000-000N00T435F Q4 2260 2554 CXA1830-0000-000N0YQ435H CXA1830-0000-000N0YQ435F R2 2420 2735 R4 2600 2938 S4 2990 3379 T2 3200 3616 Q2 2100 2373 Q4 2260 2554 R2 2420 2735 CXA1830-0000-000N0YR230H CXA1830-0000-000N0YR230F S2 2780 3141 CXA1830-0000-000N00S227H CXA1830-0000-000N00S227F S4 2990 3379 T2 3200 3616 CXA1830-0000-000N00T227H CXA1830-0000-000N00T227F P4 1965 2221 CXA1830-0000-000N0YP427H CXA1830-0000-000N0YP427F Q2 2100 2373 Q4 2260 2554 Chromaticity Region 50H Chromaticity Region CXA1830-0000-000N00T450H CXA1830-0000-000N00U250H 50F CXA1830-0000-000N0HS450H 50H 40H CXA1830-0000-000N0HT250H CXA1830-0000-000N00T440H 35H 35H CXA1830-0000-000N0HS440H CXA1830-0000-000N0HT240H CXA1830-0000-000N0YR235H 50F 40F CXA1830-0000-000N00S430H CXA1830-0000-000N00T230H 40F 27H 27H CXA1830-0000-000N0YQ430H CXA1830-0000-000N00S427H CXA1830-0000-000N0YQ227H CXA1830-0000-000N0YQ427H CXA1830-0000-000N00T440F CXA1830-0000-000N0HS440F CXA1830-0000-000N0HT240F CXA1830-0000-000N00S435F 35F 35F CXA1830-0000-000N00T235F CXA1830-0000-000N0YR235F CXA1830-0000-000N0YR435F 30F CXA1830-0000-000N0YQ230H 30H CXA1830-0000-000N0HT250F CXA1830-0000-000N00U240F CXA1830-0000-000N0YR435H 30H CXA1830-0000-000N00U250F CXA1830-0000-000N0HS450F CXA1830-0000-000N00U240H 40H CXA1830-0000-000N00T450F CXA1830-0000-000N00S430F CXA1830-0000-000N00T230F CXA1830-0000-000N0YQ230F 30F 27F 27F CXA1830-0000-000N0YQ430F CXA1830-0000-000N00S427F CXA1830-0000-000N0YQ227F CXA1830-0000-000N0YQ427F Notes • * Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. Flux values @ 25 °C are calculated and for reference only. Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 3 XLamp CXA1830 LED Flux Characteristics, ANSI White Order Codes and Bins (If = 800 mA, TJ = 85 °C) The following tables provide order codes for XLamp CXA1830 LEDs. For a complete description of the order code nomenclature, please reference Bin and Order Code Formats (page 11). Base Order Codes Min. Luminous Flux @ 800 mA CRI CCT Range Min Typ 70 75 5000 K 80 70 --- 75 4000 K 80 --- Chromaticity Regions Order Code Group Flux (lm) @ 85 °C Flux (lm) @ 25 °C* T4 3440 3887 U2 3680 4158 S4 2990 3379 T2 3200 3616 T4 3440 3887 CXA1830-0000-000N0HT40E3 T2 3200 3616 CXA1830-0000-000N00T20E5 T4 3440 3887 U2 3680 4158 S4 2990 3379 T2 3200 3616 3A0, 3B0, 3C0, 3D0 CXA1830-0000-000N00T40E3 CXA1830-0000-000N00U20E3 CXA1830-0000-000N0HS40E3 3A0, 3B0, 3C0, 3D0 5A0, 5B0, 5C0, 5D0 CXA1830-0000-000N0HT20E3 CXA1830-0000-000N00T40E5 CXA1830-0000-000N00U20E5 5A0, 5B0, 5C0, 5D0 CXA1830-0000-000N0HS40E5 CXA1830-0000-000N0HT20E5 Notes • * Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. Flux values @ 25 °C are calculated and for reference only. Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 4 XLamp CXA1830 LED Relative Spectral Power Distribution Relative Spectral Power Distribution (If = 800 ma, Tj = 85 °C) The following graph is the result of a series of pulsed measurements at 800 mA and TJ = 85 °C. 100% Relative Spectral Power 90% 80% 70% 60% 5000K, 70 CRI 50% 4000K, 70 CRI 40% 3000K, 80 CRI 30% 3000K, 93 CRI 20% 10% 0% 380 430 480 530 580 630 680 730 780 Wavelength (nm) Electrical Characteristics The following graph is the result of a series of steady-state measurements. 41 40 Voltage (V) 39 Tc = 25 °C 38 Tc = 55 °C Tc = 85 °C 37 Tc = 105 °C 36 35 34 400 600 800 1000 1200 1400 Current (mA) Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 5 XLamp CXA1830 LED Relative Luminous Flux The relative luminous flux values provided below are the ratio of: • Measurements of CXA1830 at steady-state operation at the given conditions, divided by • Flux measured during binning, which is a pulsed measurement at 800 mA at TJ = 85 °C. For example, at steady-state operation of Tc = 55 °C, IF = 1000 mA, the relative luminous flux ratio is 120% in the chart below. A CXA1830 LED that measures 2100 lm during binning will deliver 2340 lm (2100 * 1.2) at steady-state operation of Tc = 55 °C, IF = 1000 mA. 180% Relative Luminous Flux 160% 140% 120% Tc = 25 °C 100% Tc = 55 °C 80% Tc = 85 °C Tc = 105 °C 60% 40% 20% 0% 400 600 800 1000 1200 1400 Current (mA) Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 6 XLamp CXA1830 LED Far Field Typical Spatial Distribution Relative Luminous Intensity 100% 80% 60% 40% 20% -90 -70 -50 -30 0% -10 10 30 50 70 90 Angle (º) Performance Groups - Brightness (If = 800 mA, Tj = 85 °C) XLamp CXA1830 LEDs are tested for luminous flux and placed into one of the following bins. Group Code Min. Luminous Flux @ 800 mA Max. Luminous Flux @ 800 mA P4 1965 2100 Q2 2100 2260 Q4 2260 2420 R2 2420 2600 R4 2600 2780 S2 2780 2990 S4 2990 3200 T2 3200 3440 T4 3440 3680 U2 3680 3955 Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 7 XLamp CXA1830 LED Performance Groups - Chromaticity (Tj = 85 °C) XLamp CXA1830 LEDs are tested for chromaticity and placed into one of the regions defined by the following bounding coordinates. EasyWhite Color Temperatures – 4-Step EasyWhite Color Temperatures – 2-Step Code Code 50F 40F 35F 30F 27F x y 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3758 0.3844 0.3778 0.3800 0.4030 0.3857 0.4040 0.3966 0.4061 0.3941 0.4186 0.4037 0.4132 0.3976 0.4116 0.3865 0.4099 0.3890 0.4242 0.3919 0.4291 0.3973 0.4322 0.4096 0.4333 0.4062 0.4449 0.4141 0.4395 0.4084 0.4359 0.3960 0.4351 0.3994 0.4475 0.3994 0.4528 0.4046 0.4573 0.4178 0.4578 0.4138 0.4695 0.4207 0.4638 0.4152 0.4589C 0.4021 0.4586 0.4060 CCT 5000K 4000K 3500K 3000K 2700K x y 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3981 50H 40H 35H 30H 27H Code CCT 3A0 3B0 0E3 5000K 3C0 3D0 5000K 4000K 3500K 3000K 2700K ANSI White Bins ANSI White Bins Bin Code CCT Code CCT Bin Code x y .3670 .3578 .3702 .3722 .3825 .3798 .3369 .3783 .3646 .3616 .3702 .3722 .3463 .3687 .3736 .3874 .3451 .3554 .3869 .3958 .3371 .3490 .3825 .3798 .3825 .3798 .3869 .3958 .4006 .4044 x y .3371 .3490 .3451 .3554 .3440 .3427 .3366 .3376 5A0 5B0 0E5 4000K .3463 .3687 .3551 .3760 .3533 .3620 .3451 .3554 .3950 .3875 .3451 .3554 .3783 .3646 .3533 .3620 .3825 .3798 .3515 .3487 .3950 .3875 .3440 .3427 .3898 .3716 5C0 5D0 Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 8 XLamp CXA1830 LED Cree EasyWhite Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.45 ANSI C78.377 Quadrangle EasyWhite 4-step EasyWhite 2-step 0.44 2700K 3000K 0.43 3500K 0.42 4000K 0.41 4500K 0.40 5000K CCy 0.39 5700K 0.38 0.37 0.36 0.35 0.34 0.33 0.49 0.48 0.47 0.46 0.45 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.32 CCx Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 9 XLamp CXA1830 LED Cree ANSI White Bins Plotted on the 1931 CIE Color Space (Tj = 85 °C) 0.42 3500K 0.41 4000K 0.40 4500K 5C 0.39 5B 5000K CCy 0.38 5D 0.37 5A 5700K 0.36 3C 3B 3D 0.35 3A 0.34 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.33 CCx Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 10 XLamp CXA1830 LED Bin and Order Code Formats Bin codes and order codes are configured as follows: Order CodeBin Code Series = CXA18 Series = CXA18 Internal code Chromaticity bin CRI Specification 0 = Standard CRI H = 80 min CRI Y = 93 min CRI Vf class: N0 = 37-V class Internal code 6 5 NOTICE SSSSSCC-HHHH-HHHGGNNNNNN CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION SSSSSCC-WWW-FF-GGR-AAAAA 4 CRI Specification B = 70 min CRI H = 80 min CRI Y = 93 min CRI CONTAINED WITHIN ARE THE PROPRIETARY AND CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT OF CREE INC. Kit code Vf class: N0 = 37-V class REV Flux bin Performance class D 3 Performance class Mechanical Dimensions Dimensions are in mm. 17.85 ±0.2 Tolerances unless otherwise specified: .x + .10 6.37 .70 C .70 .xx + .03 .xxx + .010 1.15 ± .15 2.60 Tc 1.30 2.60 x° + 1° R.500 6.92 17.85 ±0.2 B 14.0 ±0.02 R.500 .70 16.0 ±0.2 2.60 2.60 .70 TOLERANCE DIMENSION .X ± .XX ± .XXX ± X° ± 0.55 ± 0.1 A THIRD ANGLE PROJECTION UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND AFTER FINISH. TOLERANCE UNLESS SPECIFIED: .XX ± .25 .XXX ± .125 X° ± .5 ° FOR SHEET METAL PARTS ONLY .X ± 1.5 .XX ± .75 .XXX ± .25 X° ± .5 ° Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 11 SURFACE FINISH: 6 5 4 3 1.6 XLamp CXA1830 LED Thermal Design The CXA family of LED arrays can include over a hundred different LED die inside one package, and thus over a hundred different junction temperatures (TJ). Cree has intentionally removed junction-temperature-based operating limits and replaced the commonplace maximum TJ calculations with maximum ratings based on forward current (IF) and case temperature (Tc). No additional calculations are required to ensure the CXA LED is being operated within its designed limits. Please refer to page 2 for the Operating Limit specification. Cree has measured the temperature at the bottom of the package, commonly referred to as the solder point (TSP), and found this value to be equivalent to the temperature at the Tc location at the top of the package once the LED has reached thermal equilibrium. There is no need to calculate for TJ inside the package, as the thermal management design process, specifically from TSP to ambient (Ta), remains identical to any other LED component. For more information on thermal management of Cree XLamp LEDs, please refer to the XLamp Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management. For CXA soldering recommendations and more information on thermal interface materials (TIM) and connection methods, please refer to the Cree XLamp CXA Family LEDs soldering and handling document at www.cree.com/xlamp_app_notes/CXA_SH. To keep the CXA1830 LED at or below the maximum rated Tc, the case to ambient temperature thermal resistance (R_c-a) must be at or below the maximum R_c-a R_j-c R_j-c Tc Tc value shown on the following graph, depending on the operating environment. The y‑axis in the graph is a base 10 logarithmic scale. As the figure at right shows, the R_c-a value is the sum of the thermal resistance of R_tim R_c-a the TIM (R_tim) plus the thermal resistance of the heat sink (R_hs). R_hs CXA1830 Ta Ta 100.00 Maximum R_c-a 10.00 Ta = 25 °C Ta = 55 °C 1.00 Ta = 85 °C Ta = 105 °C 0.10 0.01 400 600 800 1000 1200 1400 Current (mA) Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 12 XLamp CXA1830 LED Notes Lumen Maintenance Projections Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document at www.cree.com/xlamp_app_notes/LM80_results. Please read the XLamp Long-Term Lumen Maintenance application note at www.cree.com/xlamp_app_notes/lumen_ maintenance for more details on Cree’s lumen maintenance testing and forecasting. Please read the XLamp Thermal Management application note at www.cree.com/xlamp_app_notes/thermal_management for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. 13 XLamp CXA1830 LED Packaging Cree CXA1830 LEDs are packaged in trays of 20. Five trays are sealed in an anti-static bag and placed inside a carton, 6 5 4 3 2 for a total of 100 LEDs per carton. Each carton contains 100 LEDs from the same performance bin. NOTICE IDENTIAL. THIS PLOT AND THE INFORMATION WITHIN ARE THE PROPRIETARY AND IAL INFORMATION OF CREE, INC. THIS PLOT E COPIED, REPRODUCED OR DISCLOSED TO ANY IZED PERSON WITHOUTTHE WRITTEN CONSENT C. Dimensions are in inches. REV DESC. DATE BY CHK. REV DESC. DATE Tolerances: BY CHK. .x + .1 7.8755.875 R.375 .75 6 .xx + .05 R.375 R.375 5 x° + 1° .75 4 NOTICE FIDENTIAL. THIS PLOT AND THE INFORMATION D WITHIN ARE THE PROPRIETARY AND TIAL INFORMATION OF CREE, INC. THIS PLOT E COPIED, REPRODUCED OR DISCLOSED TO ANY IZED PERSON WITHOUTTHE WRITTEN CONSENT C. .xxx + .005 3 2 1 .875 1.125 1.125 5.875 7.125 5.875 R.375 .875 5.875 .38 1.125 .38 .38 .875 LABEL WITH CREE BIN CODE, QTY, LOT# .19 .75 PATENT LABEL THIS DRAWING CONTAINS IS LOCATED ON UNDERSIDE OF PROPRIETARY DESIGN INFORMATION AND REMAINS ALONG WITH THE PRODUCT OR PRODUCTS CARTON REPRESENTED HEREIN THE PROPERTY OF TEK PAK, INCORPORATED. SECTION C-C THIS DOCUMENT AND THE INFORMATION IT CONTAINS MAY NOT BE COPIED, TRANSMITTED, OR USED BY ANY THIRD PARTY WITHOUT THE EXPRESS WRITTEN APPROVAL OF TEK PAK, INCORPORATED. .875 LABEL WITH CREE UNLESS OTHERWISE NOTED ALL TOLERANCES ARE AS FOLLOWS: BIN NOT CODE, QTY, LOT# DO FRACT ±1/64 X.X" ±.030 X.0mm ±.75mm SCALE DWG. .38 BAG ANGLES ±0°-30' X.XX" ±.015 X.Xmm ±.30mm DRAFT ±1° X.XXX" ±.005 X.XXmm ±.10mm THIS DRAWING CONTAINS PROPRIETARY DESIGN INFORMATION AND REMAINS ALONG WITH THE PRODUCT OR PRODUCTS REPRESENTED HEREIN THE PROPERTY OF TEK PAK, INCORPORATED. THIS DOCUMENT AND THE INFORMATION IT CONTAINS DWG.TITLE MAY NOT BE COPIED, TRANSMITTED, OR USED BY ANY THIRD PARTY WITHOUT THE EXPRESS WRITTEN APPROVAL OF TEK PAK, INCORPORATED. DWG.TITLE PART.38 DRAWING 4-3-13 SIZE DATE: DOKJS NOT DR. BY: SCALE DWG. CHK. BY: B PATENT LABEL IS LOCATED ON UNDERSIDE OF CARTON UNLESS0.750 OTHERWISE NOTED ALL SCALE: DWG.TOLERANCES NO. ARE AS FOLLOWS: 022489-00 FRACT ±1/64 X.X" ±.030 X.0mm ±.75mm ANGLES ±0°-30' X.XX" ±.015 X.Xmm ±.30mm DRAFT ±1° X.XXX" ±.005 X.XXmm ±.10mm SHEET 2 OF 2 BAG PART DRAWING 4-3-13 SIZE DATE: DR. BY: KJS LABEL CHK. BY: WITH CREE B BIN CODE, QTY, LOT# SCALE: 0.750 DWG. NO. 022489-00 SHEET 2 OF 2 LABEL WITH CREE BIN CODE, QTY, LOT# UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS & BEFORE FINISH. TOLERANCE UNLESS SPECIFIED: LABEL WITH CREE BIN CODE, QTY, LOT# .X ± .XX ± .XXX ± X° ± THIRD ANGLE PROJECTION 6 5 3 .X .XX 4 THIRD ANGLE PROJECTION Copyright © 2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. trademarks of Cree, Inc. 5 4 3 ± ± .XXX ± X° ± 0.1 .05 .005 1° FOR SHEET METAL PARTS ONLY .06 Cree®,.X the± Cree logo, .XX ± .03 .XXX ± .010 X° ± 2° APPROVED DATE DATE APPROVED DATE TITLE CXA15 MATERIAL FOR SHEET METAL PARTS ONLY DRAWN BY ± .06 DATE UNLESS OTHERWISE SPECIFIED .X .XX ± .03 DIMENSIONS ARE IN CHECK ± .XXX .010 DATE MILLIMETERS & BEFORE FINISH. ± 2° TOLERANCE UNLESS SPECIFIED: X° LABEL WITH CREE BIN CODE, QTY, LOT# 6 0.1 .05 .005 1° DRAWN BY CHECK SIZE FINAL PROTECTIVE FINISH DRAW C CXA 4600 Silicon Dri Durham, N.C 27 SCALE Phone (919) 361 0.500 Fax (919) 313-5 2 DATE TITLE CXA15XX_DATASHEET MATERIAL SIZE C DRAWING NO. XLamp® and EasyWhite® are CXA15XX_DATASHEET_BAG2013 registered FINAL PROTECTIVE FINISH SCALE 2 SHEET 0.500 14 1 OF