Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company SOT-23 Formed SMD Package BCW71 BCW72 SILICON PLANAR EPITAXIAL TRANSISTORS N–P–N transistors Marking BCW71 = Kl BCW72 = K2 Pin configuration 1 = BASE 2 = EMITTER 3 = COLLECTOR 3 1 2 ABSOLUTE MAXIMUM RATINGS D.C. current gain at Tj = 25 °C IC = 2 mA; VCE = 5 V Collector–base voltage (open emitter) Collector–emitter voltage (open base) Collector current (peak value) Total power dissipation up to Tamb = 25 °C Junction temperature Transition frequency at f = 35 MHz IC = 10 mA; VCE = 5 V Noise figure at RS = 2 kΩ IC = 200 µA; VCE = 5 V; f = 1 kHz; B = 200 Hz Continental Device India Limited Data Sheet hFE VCB0 VCE0 ICM Ptot Tj BCW71 BCW72 > 110 200 < 220 450 max. 50 V max. 45 V max. 200 mA max. 250 mW max. 150 °C fT typ. 300 MHz F < 10 dB Page 1 of 4 BCW71 BCW72 RATINGS (at TA = 25°C unless otherwise specified) Limiting values Collector–base voltage (open emitter) Collector–emitter voltage (open base) IC = 2 mA Emitter–base voltage (open collector) Collector current (d.c.) Collector current (peak value) Total power dissipation up to Tamb = 25 °C Storage temperature Junction temperature VCB0 max. VCE0 VEB0 IC ICM Ptot Tstg Tj max. max. max. max. max. –55 to max. THERMAL RESISTANCE From junction to ambient Rth j–a = 500 K/W CHARACTERISTICS Tj = 25 °C unless otherwise specified Collector cut–off current IE = 0; VCB = 20 V IE = 0; VCB = 20 V; Tj = 100 °C ICB0 ICB0 < < 100 nA 10 µA Base emitter voltage IC = 2 mA; VCE = 5 V VBE 550 to 700 mV Saturation voltages IC = 10 mA; lB = 0,5 mA IC = 50 mA; lB = 2,5 mA D.C. current gain IC = 10 µA; VCE = 5 V hFE IC = 2 mA; VCE = 5 V hFE Collector capacitance at f = 1 MHz IE = Ie = 0; VCB = 10 V Transition frequency at f = 35 MHz IC = 10 mA; VCE = 5 V Noise figure at RS = 2 kΩ IC = 200 µA; VCE = 5 V f = 1 kHz; B = 200 Hz Continental Device India Limited Data Sheet 50 V 45 V 5 V 100 mA 200 mA 250 mW +150 °C 150 ° C typ. VCEsat < 120 mV 250 mV VBEsat typ. 750 mV VCEsat typ. 210 mV VBEsat typ. 850 mV BCW71 90 BCW72 150 > 110 200 < 220 450 typ. Cc typ. 2,5 pF fT typ. 300 MHz F < 10 dB Page 2 of 4 BCW71 BCW72 SOT-23 Formed SMD Package SOT-23 Package Reel Information Reel specifications for Packing (13"/7" reels) +/– 0.10 2.50 1 cL 3 ł 100.0– 0.5 / ł 54.5 – 0.5 +/-0.05 ł 329.2– 0.5 / 178 – 0.5 9.2– 0.5 180 or 330 2 TRAILER 0.62 +0.08 +/–0.025 1.30 0.40 -0.02 +/–0.05 1.90 +/–0.025 2.90 +/– 0.05 0.62 14.4 M AX 7.9 10.9 +0.5 0.2 ł 13.0 ł 20.2 M IN 3 3 +/– 4" 6º 5º 7 +/–3" +/–0.025 0.95 R0.08 +/-/0.04 0.06 +/–0.01 0.12 RO.08 +/–0.02 0.60 PARTING LINE 0.21 FIXING TAPE DETAIL X 0.08 All dimensions in mm 330 / 180 mm Antistatic Coated Plastic Reel NO TES: 8mm Tape Size of Reel 330 mm (13") 10,000 Pcs No. of Devices 1. 2. 3. +/–0.10 2.50 4. 5. LEADER 2.0– 0.5 +/– 0.05 0.62 +/– 0.05 0.62 1.30 7º 0.08 8mm Tape Size of Reel 180 mm (7") 3,000 Pcs The bandolier of 330 mm reel contains at least 10,000 devices. The bandolier of 180 mm reel contains at least 3,000 devices. No m ore than 0.5% missing devices / reel. 50 empty com partments for 330 mm reel. 15 empty compartments for 180 mm reel. Three consecutive empty places might be found provided this gap is followed by 6 consecutive devices. The carrier tape (leader) starts with at least 75 empty positions (equivalent to 330 mm). In order to fix the carrier tape a self adhesive tape of 20 to 50 mm is applied. At the end of the bandolier at least 40 em pty positions (equivalent to 160 mm) are there. Tape Specification for SOT-23 Surface Mount Device – 0.1 4.0 – 0.05 – 0.1 2.0 4.0 – 0.05 1.55 – 0.1 1.75 +0.3 – 0.05 - 0.1 3.5 8.0 5.75 M AX – 0.10 2.77 – 0.1 1.22 1.0 1.6 M AX – 0.05 – 0.10 3.15 Direction of Unreeling All dimensions in mm Continental Device India Limited Data Sheet Page 3 of 4 Packing Detail PACKAGE SOT-23 T&R STANDARD PACK INNER CARTON BOX Details Net Weight/Qty Size 3K/reel 136 gm/3K pcs 10K/reel 415 gm/10K pcs 3" x 7.5" x 7.5" 9" x 9" x 9" 13" x 13" x 0.5" Qty 12.0K 51.0K 10.0K OUTER CARTON BOX Size 17" x 15" x 13.5" 19" x 19" x 19" 17" x 15" x 13.5" Qty Gr Wt 192.0K 408.0K 300.0K 12 kgs 28 kgs 16 kgs Customer Notes Component Disposal Instructions 1. CDIL Semiconductor Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country. 2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119 [email protected] www.cdilsemi.com Continental Device India Limited Data Sheet Page 4 of 4