BAS70.../BAS170W Silicon Schottky Diode • General-purpose diode for high-speed switching • Circuit protection • Voltage clamping • High-level detecting and mixing • BAS70-04S: For orientation in reel see package information below • Pb-free (RoHS compliant) package • Qualified according AEC Q1011) BAS170W BAS70-02L BAS70-02W BAS70-02V BAS70 BAS70-04 BAS70-04W ! BAS70-04S $ ! " # , ! , BAS70-06 BAS70-06W , , ! ! , , 1BAS70-02L " , " , BAS70-07 BAS70-07W ! , ! , , BAS70-05 BAS70-05W , is not qualified according AEC Q101 1 2014-02-13 BAS70.../BAS170W Type BAS170W BAS70 BAS70-02L BAS70-02V BAS70-02W* BAS70-04 BAS70-04S BAS70-04W BAS70-05 BAS70-05W BAS70-06 BAS70-06W BAS70-07 BAS70-07W Package SOD323 SOT23 TSLP-2-1 SC79 SCD80 SOT23 SOT363 SOT323 SOT23 SOT323 SOT23 SOT323 SOT143 SOT343 Configuration single single single, leadless single single series dual series series common cathode common cathode common anode common anode parallel pair parallel pair LS(nH) 1.8 1.8 0.4 0.6 0.6 1.8 1.6 1.4 1.8 1.4 1.8 1.4 2 1.8 Marking white 7 73s F c 73 74s 74s 74s 75s 75s 76s 76s 77s 77s * Not for new design Maximum Ratings at TA = 25 °C, unless otherwise specified Parameter Symbol Diode reverse voltage VR 70 V Forward current IF 70 mA Non-repetitive peak surge forward current IFSM 100 Value Unit t ≤ 10ms Total power dissipation mW Ptot BAS70, BAS70-07, TS ≤ 72 °C 250 BAS70-02L, TS ≤ 117 °C 250 BAS70-02W, -02V, TS ≤ 107 °C 250 BAS70-04, BAS70-06, TS ≤ 48 °C 250 BAS70-04S/W/-06W, BAS170W, TS ≤ 97 °C 250 BAS70-05, TS ≤ 22 °C 250 BAS70-05W, TS ≤ 90 °C 250 BAS70-07W, TS ≤ 114 °C 250 Junction temperature TJ 150 Operating temperature range Top -55 ... 125 Storage temperature TStg -55 ... 150 2 °C 2014-02-13 BAS70.../BAS170W Thermal Resistance Parameter Symbol Junction - soldering point1) RthJS Value Unit K/W BAS70, BAS70-07 ≤ 310 BAS70-02L ≤ 130 BAS70-02W, -02V ≤ 170 BAS70-04, BAS70-06 ≤ 410 BAS70-04S/W, BAS70-06W ≤ 210 BAS70-05 ≤ 510 BAS70-05W ≤ 240 BAS70-07W ≤ 145 BAS170W ≤ 190 Electrical Characteristics at TA = 25 °C, unless otherwise specified Symbol Parameter Values Unit min. typ. max. 70 - - V - - 0.1 µA DC Characteristics Breakdown voltage V(BR) I(BR) = 10 µA Reverse current IR VR = 50 V Forward voltage mV VF IF = 1 mA 300 375 410 IF = 10 mA 600 705 750 IF = 15 mA 720 880 1000 - - 20 Forward voltage matching2) ∆ VF IF = 10 mA 1For calculation of RthJA please refer to Application Note AN077 (Thermal Resistance Calculation) 2∆V F is the difference between lowest and highest VF in a multiple diode component. 3 2014-02-13 BAS70.../BAS170W Electrical Characteristics at T A = 25 °C, unless otherwise specified Symbol Parameter Values Unit min. typ. max. CT - 1.5 2 pF rf - 34 - Ω τ rr - - 100 ps AC Characteristics Diode capacitance VR = 0 , f = 1 MHz Forward resistance IF = 10 mA, f = 10 kHz Charge carrier life time IF = 25 mA 4 2014-02-13 BAS70.../BAS170W Diode capacitance CT = ƒ (VR ) Forward resistance rf = ƒ (IF) f = 1MHz f = 10 kHz 2.0 CT BAS 70W/BAS 170W 10 4 EHB00044 pF Ohm 1.5 rf 10 3 1.0 10 2 0.5 0.0 0 20 40 60 V 10 1 -2 10 80 10 -1 10 0 10 Reverse current IR = ƒ(VR ) Forward current IF = ƒ (VF) TA = Parameter TA = Parameter ΙR BAS 70W/BAS 170W EHB00043 µA mA 10 2 IF VR 10 2 1 10 2 ΙF TA = 150 C 10 1 BAS 70W/BAS 170W EHB00042 mA 10 1 85 C 10 0 10 0 TA = -40 C 25 C 85 C 150 C 10 -1 10 -3 10 -1 25 C 10 -2 0 20 40 60 V 10 -2 80 VR 0.0 0.5 1.0 V 1.5 VF 5 2014-02-13 BAS70.../BAS170W Forward current IF = ƒ (TS ) Forward current IF = ƒ (TS ) BAS70, BAS70-07 BAS70-02L 80 80 mA 60 60 50 50 IF IF mA 40 40 30 30 20 20 10 10 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 15 30 45 60 75 90 105 120 °C TS Forward current IF = ƒ (TS ) Forward current IF = ƒ (TS ) BAS70-02W, -02V BAS70-04, BAS70-06 80 80 mA mA 60 60 50 50 IF IF 150 TS 40 40 30 30 20 20 10 10 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 TS 15 30 45 60 75 90 105 120 °C 150 TS 6 2014-02-13 BAS70.../BAS170W Forward current IF = ƒ (TS ) Forward current IF = ƒ (TS ) BAS70-04S/W, BAS70-06W, BAS170W BAS70-05 80 80 mA 60 60 50 50 IF IF mA 40 40 30 30 20 20 10 10 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 15 30 45 60 75 90 105 120 °C TS Forward current IF = ƒ (TS ) Forward current IF = ƒ (TS ) BAS70-05W BAS70-07W 80 80 mA mA 60 60 50 50 IF IF 150 TS 40 40 30 30 20 20 10 10 0 0 15 30 45 60 75 90 105 120 °C 0 0 150 TS 15 30 45 60 75 90 105 120 °C 150 TS 7 2014-02-13 BAS70.../BAS170W Forward current IF = ƒ (TS ) Permissible Puls Load RthJS = ƒ (t p) BAS170W BAS70 10 3 80 mA K/W RthJS IF 60 50 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 40 30 10 1 20 10 0 0 15 30 45 60 90 105 120 °C 75 10 0 -6 10 150 10 -5 10 -4 10 -3 10 -2 TS s 10 0 10 0 tp Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS70-02L BAS70 10 2 10 3 - RthJS IFmax/IFDC K/W D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 10 0 -6 10 10 -5 10 -4 10 -3 10 2 10 10 -2 s 10 10 0 -6 10 0 tp 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 1 10 -5 10 -4 10 -3 10 -2 s tp 8 2014-02-13 BAS70.../BAS170W Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS70-02W, -02V BAS70-02L 10 1 10 3 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 - 10 0 -6 10 RthJS IFmax/IFDC K/W 10 -5 10 -4 10 10 2 D=0.5 0.2 0.1 0.05 0.02 0.01 0.005 0 10 1 -3 10 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 10 0 tp Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS70-04, BAS70-06 BAS70-02W, -02V 10 1 10 3 IFmax/IFDC K/W RthJS D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tP 9 2014-02-13 BAS70.../BAS170W Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS70-04S BAS70-04, BAS70-06 10 2 10 3 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 RthJS IFmax/IFDC K/W 10 2 10 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -6 10 0 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 1 10 -5 10 -4 10 -3 10 -2 tP s 10 0 10 0 tp Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS70-04W, BAS70-06W BAS70-04S 10 2 10 3 - RthJS IFmax/IFDC K/W D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 10 0 -6 10 10 -5 10 -4 10 -3 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 10 2014-02-13 BAS70.../BAS170W Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS70-05 BAS70-04W, BAS70-06W 10 1 10 3 IFmax/IFDC K/W - 10 0 -6 10 10 -5 10 -4 10 -3 RthJS D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 10 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 tp s 10 0 10 0 tp Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS70-05W BAS70-05 10 2 10 3 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 10 0 -6 10 RthJS IFmax/IFDC K/W 10 -5 10 -4 10 -3 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 10 -2 s 10 10 0 -6 10 0 tp 10 -5 10 -4 10 -3 10 -2 s tp 11 2014-02-13 BAS70.../BAS170W Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS70-07W BAS70-05W 10 1 10 3 IFmax/IFDC K/W - RthJS D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -6 10 0 10 -5 10 -4 10 -3 10 -2 s tp 10 0 10 0 tp Permissible Pulse Load Permissible Puls Load RthJS = ƒ (t p) IFmax / IFDC = ƒ (t p) BAS170W BAS70-07W 10 3 - D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 RthJS IFmax/IFDC 10 2 10 2 0.5 0.2 0.1 0.05 0.02 0.01 0.005 D=0 10 1 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 10 0 -7 10 0 tp 10 -6 10 -5 10 -4 10 -3 10 -2 s tp 12 2014-02-13 BAS70.../BAS170W Permissible Pulse Load IFmax / IFDC = ƒ (t p) BAS170W IFmax/IFDC 10 1 D=0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 0 -6 10 10 -5 10 -4 10 -3 10 -2 s 10 0 tp 13 2014-02-13 Package SC79 14 BAS70.../BAS170W 2014-02-13 Package SCD80 BAS70.../BAS170W Package Outline 0.2 M A +0.05 0.13 -0.03 0.8 ±0.1 0.2 ±0.05 10˚MAX. 1.7 ±0.1 1 0.3 ±0.05 Cathode marking 7˚ ±1.5˚ 1.3 ±0.1 A 2 0.7 ±0.1 0.35 1.45 Foot Print 0.35 Marking Layout (Example) 2005, June Date code BAR63-02W Type code Cathode marking Laser marking Standard Packing Reel ø180 mm = 3.000 Pieces/Reel Reel ø180 mm = 8.000 Pieces/Reel (2 mm Pitch) Reel ø330 mm = 10.000 Pieces/Reel Reel with 2 mm Pitch 2 0.2 2.5 8 1.45 Standard 4 Cathode marking 0.4 0.9 Cathode marking 15 0.7 2014-02-13 BAS70.../BAS170W Date Code marking for discrete packages with one digit (SCD80, SC79, SC75 1) ) CES-Code Month 2 0 03 2 0 04 2005 2006 2 0 07 2008 2009 2010 2011 2012 2 0 13 2014 01 a p A P a p A P a p A P 02 b q B Q b q B Q b q B Q 03 c r C R c r C R c r C R 04 d s D S d s D S d s D S 05 e t E T e t E T e t E T 06 f u F U f u F U f u F U 07 g v G V g v G V g v G V 08 h x H X h x H X h x H X 09 j y J Y j y J Y j y J Y 10 k z K Z k z K Z k z K Z 11 l 2 L 4 l 2 L 4 l 2 L 4 12 n 3 N 5 n 3 N 5 n 3 N 5 1) New Marking Layout for SC75, implemented at October 2005. . 16 2014-02-13 Package SOD323 17 BAS70.../BAS170W 2014-02-13 Package SOT143 18 BAS70.../BAS170W 2014-02-13 Package SOT23 19 BAS70.../BAS170W 2014-02-13 Package SOT323 20 BAS70.../BAS170W 2014-02-13 Package SOT343 21 BAS70.../BAS170W 2014-02-13 Package SOT363 22 BAS70.../BAS170W 2014-02-13 Package TSLP-2-1 23 BAS70.../BAS170W 2014-02-13 BAS70.../BAS170W Edition 2009-11-16 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (<www.infineon.com>). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. 24 2014-02-13