IN INDDUUSTRI STRIAAL LNNETWO ETWORK RKI N I NGGSO SOLUTI LUTION ONSS D ATA S H E E T EtherTRAK -2 Ethernet I/O Modules EtherTRAK®-2 Ethernet I/O Module D ATA S H E E T ® Sixnet Automation Series D ATA S H E E T Industrial Automation EtherTRAK®-2 Ethernet EtherTRAK®-2 EthernetI/O I/OModule Module Ethernet I/O Modules Industrial IndustrialAutomation Automation PRODUCT HIGHLIGHTS Flexible mixHIGHLIGHTS of I/O channels support • PRODUCT PRODUCT HIGHLIGHTS all instrumentation needs Flexiblemix mixofofI/O I/Ochannels channelssupport support ••allFlexible Ring™ for fast redundancy needs allinstrumentation instrumentation needs • Real-Time independent Ethernet ports Ring™ for Real-Time Ring™ forfast fastredundancy redundancy • •Dual •Real-Time enable flexible networking Dual independent Ethernet Dual independent Ethernetports ports •Built-in •enable flexible networking security proactively enable flexible networkingblocks • unwanted access proactively blocks Built-insecurity security proactively blocks ••Built-in unwanted access health diagnostics and unwanted access • Extensive reporting reduce Extensive health diagnostics Extensive health diagnosticsand and ••reporting reducedowntime downtime reporting reduce downtime Standard Modbus protocols provide • universal compatibility Modbus Standard Modbusprotocols protocolsprovide provide ••Standard universal compatibility universal compatibility design supports extreme • Rugged andsupports hazardous Ruggeddesign design supportsextreme extreme •temperatures •Rugged temperatures locations temperaturesand andhazardous hazardous Sixnet’s EtherTRAK®-2 Ethernet I/O modules provide a simple and secure way to reliably monitor remote sites located in harsh environments. Offering the lowest cost per I/O point and rugged Sixnet’s Ethernet a asimple and secure way reliably monitor Sixnet’sEtherTRAK®-2 EtherTRAK®-2 EthernetI/O I/Omodules modulesprovide provide simple and secure waytoto reliably monitor environmental ratings, EtherTRAK-2 modules are ideal for both control rooms and extreme locations remote sites Offering the point remote siteslocated located inharsh harshenvironments. environments. Offering thelowest lowestcost costper perI/O I/O pointand andrugged rugged across industries thatininclude oil & gas, power & energy, transportation, mining, maritime and water/ environmental environmentalratings, ratings,EtherTRAK-2 EtherTRAK-2modules modulesare areideal idealfor forboth bothcontrol controlrooms roomsand andextreme extremelocations locations wastewater. across industries that include oil & gas, power & energy, transportation, mining, maritime across industries that include oil & gas, power & energy, transportation, mining, maritimeand andwater/ water/ Our compact DIN-rail modules support open-standard protocols to provide flexible communication wastewater. wastewater. options for existing or newly installed Ethernet networks. By seamlessly replacing external devices such Our compact DIN-rail modules open-standard protocols totoprovide flexible communication compact DIN-rail modulessupport support open-standard provide flexible communication asOur switches, data concentrators and protocol converters,protocols EtherTRAK-2 modules transcend simple I/O options for existing or newly installed Ethernet networks. By seamlessly replacing external devices options for existing or newly installed Ethernet networks. By seamlessly replacing external devicessuch such capabilities to cost-effectively streamline systems and improve reliability. asasswitches, switches,data dataconcentrators concentratorsand andprotocol protocolconverters, converters,EtherTRAK-2 EtherTRAK-2modules modulestranscend transcendsimple simpleI/O I/O capabilities capabilitiestotocost-effectively cost-effectivelystreamline streamlinesystems systemsand andimprove improvereliability. reliability. Control Center Control Control Center Center IPm Controller IPm IPm Controller Controller Ring Switch Ring Ring Switch Switch Real-Time Ring Real-Time Real-Time Ring Ring locations locations APPLICATIONS APPLICATIONS APPLICATIONS Oil & Gas • • OilOil&&Gas Gas • & Energy • •-Power Power & Power &Energy Energy •Transmission - -Transmission Transmission - Distribution - -Distribution Distribution Transportation Transportation Transportation Mining Mining Mining Maritime Maritime Maritime Water/Wastewater Water/Wastewater Water/Wastewater • •• • •• • •• • •• F L FL EFXIBLE. ABLE. AABBLE PPOW LEEXXI BI BL LE.RELI E.RELI RELI L EP. .OWE OWERERFU RF FULUL. L. . Service Room Service Service Room Room IPm Controller IPm IPm Controller Controller Ring Switch Ring Ring Switch Switch EtherTRAK-2 EtherTRAK-2 I/O Modules EtherTRAK-2 I/O I/OModules Modules EtherTRAK-2 EtherTRAK-2 I/O Modules EtherTRAK-2 I/O I/OModules Modules Pump Pump Pump Room Room Room Engine Engine Engine Room Room Room Off-Shore OilRig Rig Off-Shore Off-ShoreOil Oil Rig EtherTRAK-2 Ethernet I/O Module EtherTRAK®-2 Ethernet I/O Module Specifications Industrial Automation INDUSTRIAL AUTOMATION FEATURES & BENEFITS Sixnet’s rugged RTUs and I/O provide a simple yet powerful means to reliably monitor and control remote sites around the clock in the harshest environments. Our compact automation systems can start small and grow as needs increase without requiring hardware replacement. Virtually unlimited scalability means organizations have fewer restrictions on the number of remote sites or devices that are supported. “Best of both worlds” programming combines Windows ease of use with the future-proof security of an embedded Linux OS. High-Performance, Flexible I/O Configuration Maintenance & Monitoring • Provides high-speed functionality • Lowers overall cost per I/O point – Flexible mix of up to 34 I/O supports DI, DO, AI, AO, temperature (RTD and thermocouples) – High resolution 16-bit analog or high-speed 10-bit analog – Fast I/O polling of up to 1mS – Advanced counter functions with 32-bit reporting – Time proportioned outputs simplify highspeed pulse rate functions • Delivers cross-platform configuration • Offers easy-to-use software tools – Configuration and monitoring via standard web browser – On-board storage for project documentation – Project-based software tools – User-based history tracks changes – Per-channel calibration – Configuration archiving – Module hot-swap capabilities Built-In Security • Prevents unwanted intrusion • Guards against unauthorized users – User-assigned permissions – Firewall protection Flexible, Redundant Networking • Simplifies connectivity by replacing Ethernet switches • Ensures reliability without additional cost – Real-Time Ring switch mode for fast redundancy – Switch elimination mode enables daisychaining – Dual independent Ethernet ports – Ethernet, RS-485 and USB connections – Optional Power over Ethernet (PoE) – Embedded data concentrator Rugged, Compact Design • Supports harsh environments • Delivers proven reliability – Industrial -40 to 75°C operating range – UL/CSA (CUL), FCC and CE rated – Hazardous locations rated for Class I, Div 2 (Zone 2) areas – Vibration resistant IEC60068-2-6 – Self-resetting fuses protect I/O Watchdog Monitoring & Reporting • Provides health reports of various module functions • Reduces maintenance downtime – CPU health – Dual-power status – Communication activity – PoE status – Port link status NETWORKING OPTIONS Break in Cable Active Data Path Real-Time Ring Switch Mode Create redundant Ethernet reliability without additional cost Backup Data Path Switch Elimination Mode Daisy-chain modules without external switches to save money and simplify connectivity LAN A LAN B Two Networks Mode Each Ethernet port has a unique MAC and IP address for connection to two independent physical networks FLEX XII B L E . R E L I A B L E. E . POWERF POWE RF U L. EtherTRAK®-2 Ethernet I/O Module Specifications SPECIFICATIONS General I/O Performance • • • • • Power supply voltage: 10-30 VDC Input current requirement: 100 mA @ 24 VDC typical with no loads PoE power (EB modules only): 10 watts at 60°C for user loads De-rate: up to 5 watts at 75°C I/O: 512 discrete inputs and outputs plus 256 analog input and output registers • Unique station addresses: 16,000+ (Sixnet or 247 Modbus) Discrete Input Channels • • • • • • • • Voltage range: 10–30 VDC or 60–140 VAC Input isolation: 150 volts (16 channel modules only) Input resistance: 10 Kohms Slow response (software configurable): 25 mS (20 Hz. maximum counting rate) Fastest response (software configurable): 1 mS (400 Hz. maximum counting rate) Special fast counting rate: up to 50 KHz on channels 1 and 2 Count up: pulse timing and pulse rate 16 or 32-bit reporting Refer to user manual for additional specifications Ethernet Performance Discrete Output Channels • • • • • • • • • • • • Ethernet ports: 10/100BaseTx (auto-detecting) Connection: RJ45 (auto-crossover) Isolation: 1500 volts RMS 1 minute (60 Hz.) Message response time: <1 mS per message Diagnostic LEDs: solid indicates link, blinking indicates activity Protocol support: TCP/IP, ARP, UDP, ICMP, DHCP, HTTP, Modbus UDP/TCP slave mode, Modbus UDP master mode, Sixnet UDR UDP/ TCP slave mode, Sixnet UDR UDP master mode • Real-Time Ring: 5ms per hop recovery time • Independent networks: 1 or 2 with unique MAC and IP addres Serial Ports Output voltage range: 10-30 VDC or 10-30VDC/AC Maximum output power: up to 1A per channel Short circuit protection: self-reset fuses (trip above 1.5 Amp) Input isolation: 150 volts (16 channel modules only) All channels scan rate: 1 mS Refer to user manual for additional specifications Web Interface • Secure web access with password protection for multiple users • 1 simultaneous user • 750K memory for user pages (more with special order) • RS-485 port: screw terminals (485+, 485-, GND; 2-wire halfduplex, not isolated) • RS-485 networking: up to 32 (full load) stations • RS-485 distance: up to 0.5 miles (baud-rate dependent) • Baud rates: from 300 to 57,600 baud • Protocols: master and slave; Sixnet and Modbus RTU/ASCII • Diagnostic LEDs: transmit (TD) and receive (RD) Environmental Analog Output Channels Standards Compliance • • • • • • • • Electrical safety : UL 508, CSA C22.2/142; EN61010-1; CE • EMI emissions: FCC part 15, ICES-003, Class A; EN55022; IEC6100-6-4; CE • EMC immunity : IEC61000-6-2 (EN61000-4-2,3,4, 5, 6, 8); CE • Hazardous locations: Class 1, Div 2, Groups A, B, C, D; ISA12.12.01; CSA C22.2/213; ATEX (Zone 2) IEC60079-0,-15 • Marine and offshore: tested and/or verified to meet various standards such as ABS, DNV No. 2.4, and Lloyds Analog output range: 4-20 mA D/A resolution: 16 bits (less than 1 uA) Full scale accuracy: +/-0.02% (at 20°C) Span and offset temperature: +/- 50 ppm per °C Load resistance (@ 24 V): 0-750 Ohms Current limiting short circuit protection Refer to user manual for additional specifications Analog Input Channels • • • • • • • • • • • • Input range: 4-20mA, 0-10VDC, RTD, thermocouple and 250mV A/D resolution: 16 bits (0.003%); 10 bits (1mS fast option) Input impedance (resistance): 100 ohms or 200 Kohms Fuses: self-resetting short circuit protection (4-20 mA inputs) DMRR (differential mode): 66 db at 50/60 Hz Update time: from 880 mS to 1 mS (depending configuration) Temperature accuracy: typical uncalibrated +/-0.5°C RTD type: 100 Ohm platinum RTD alpha: 0.00385 or 0.00392 RTD connections: 2 or 3-wire RTD input range: -200 to 850°C Refer to user manual for additional specifications • Operating temperature: -40 to 75°C (-40 to 85°C storage) • Humidity: 5 to 95% RH (non-condensing; optional conformal coating) • Flammability: UL 94V-0 materials • Vibration: IEC60068-2-6 • Shock: IEC60068-2-27 Physical • Mounting: DIN rail (EN50022), direct to panel or flat panel • Packaging: impact resistant Lexan® polycarbonate • Dimensions (module and base): 5.5”L x 3.5”W x 5.1”H (14cm x 8.9cm x 13cm) Warranty • 2 years on design and manufacturing defects All specifications are subject to change. Contact Sixnet to learn more. Industrial Automation Industrial Automation EtherTRAK®-2 Ethernet I/O Module Specifications ORDER GUIDE ORDER GUIDE PART NUMBER PART NUMBER E2 or EB-MIX24880-D E2 or EB-MIX24880-D E2 or EB-MIX24882-D E2 or EB-MIX24882-D E2-MIX20884-D E2-MIX20884-D DI DI 24 24 24 24 20 20 E2 or EB-32DI24-D E2 or EB-32DI24-D E2 or EB-16DI24-D E2 or EB-16DI24-D E2-16DIAC-D E2-16DIAC-D 32 32 16 16 16 16 DO DO 8 8 8 8 8 8 E2 or EB-32DO24-D E2 or EB-32DO24-D E2 or EB-16DO24-D E2 or EB-16DO24-D 32 32 16 16 E2-16DORLY E2-16DORLY 16 16 AI AI 8 8 8 8 8 8 E2 or EB-32AI20M-D E2 or EB-32AI20M-D E2 or EB-32AI10V-D E2 or EB-32AI10V-D E2 or EB-16AI20M-D E2 or EB-16AI20M-D E2 or EB-8AO20M-D E2 or EB-8AO20M-D 32 32 32 32 16 16 E2 or EB-16AI-8AO-D E2 or EB-16AI-8AO-D 16 16 E2 or EB-16ISOTC-D E2 or EB-16ISOTC-D E2or orEB-16ISO20M-D EB-16ISO20M-D E2 E2 or orEB-10RTD-D EB-10RTD-D E2 AO DESCRIPTION AO DESCRIPTION 32 channel combination I/O with 1 isolated input counter 32 channel combination I/O with 1 isolated input counter 2 34 channel combination I/O with 2 analog outputs 2 34 channel combination I/O with 2 analog outputs 4 32 channel combination I/O with 4 analog outputs and 4 isolated 4 32input channel combination I/O with 4 analog outputs and 4 isolated counters 8 16TC 16TC 1616 10RTD 10RTD 8 8 8 input counters 32 discrete inputs (10-30 VDC) including 16 multifunction counters 32 discrete inputs (10-30 VDC) including 16 multifunction counters 16 individually isolated discrete inputs (10-30 VDC) with counters 16 individually isolated discrete inputs (10-30 VDC) with counters 16 individually isolated discrete inputs (120 VAC nominal; 10-30 16 individually isolated discrete inputs (120 VAC nominal; 10-30 VDC) with counters VDC) with counters 32 discrete outputs (10-30 VDC) 0.5 Amp each, 8 Amps total 32 discrete outputs (10-30 VDC) 0.5 Amp each, 8 Amps total 16 individually isolated discrete ouputs (10-30VDC) 1 Amp outputs, 16 individually isolated discrete ouputs (10-30VDC) 1 Amp outputs, 16 Amps total 16 Amps total 16 individually isolated discrete outputs (10-30VDC/VAC relay) 1 16 individually isolated discrete outputs (10-30VDC/VAC relay) 1 Amp outputs, 16 Amps total Amp outputs, 16 Amps total 32 analog inputs (4-20 mA) with 16-bit accuracy 32 analog inputs (4-20 mA) with 16-bit accuracy 32 analog inputs (0-10VDC) 32 analog inputs (0-10VDC) 16 analog inputs (4-20 mA) 16 analog inputs (4-20 mA) 8 analog outputs (4-20 mA) 8 analog outputs (4-20 mA) 24 channel combination, 16 analog inputs (4-20 mA) and 8 analog 24 channel combination, 16 analog inputs (4-20 mA) and 8 analog outputs (4-20 mA) outputs (4-20 mA) 16 individually isolated analog inputs (thermocouple and 16 individually isolated analog inputs (thermocouple and +/- 250 mV) with J, K, E, R, T, C, N, S +/- 250 mV) with J, K, E, R, T, C, N, S ABOUT SIXNET ABOUT SIXNET Celebrating 35 years in operation, Celebrating 35 years in operation, Sixnet provides innovative machin Sixnet provides(M2M) innovative machineto-machine connectivity to-machine (M2M) connectivity to industrial customers and to markets industrialworldwide. customersSixnet’s and flexibl markets worldwide. Sixnet’s flexible solutions enable organizations to solutions enable organizations to cost-effectively increase business cost-effectively increase business productivity. By integrating powerf productivity. By integrating powerful enterprise-class networking with enterprise-class networking with the rugged reliability, Sixnet meets rugged reliability, Sixnet the standards of the mostmeets demanding standards of applications the most demanding industrial in industries industrial in industries such asapplications power & energy, banking such as power & energy, & retail, transportation,banking video & & retail, transportation, videomobile & security, utilities, military, security, utilities, military, mobile data, maritime and more. Based in data, maritime Based in ha Ballston Lake,and NY,more. the company Ballston Lake, NY, the company offices across North America,has Asia offices across North America, Asia and Europe. and Europe. more information, ForFor more information, visit www.sixnet.com, visit www.sixnet.com, email [email protected] email [email protected] or or call 518 877 5173 call +1+1 518 877 5173 individually isolated analgo inputs (4-20 mA) 1616 individually isolated analgo inputs (4-20 mA) analog inputs (100 Ohm platinum RTD), rang is -200 to 850°C 1010 analog inputs (100 Ohm platinum RTD), rang is -200 to 850°C MECHANICALDRAWING DRAWING MECHANICAL As the global experts in communication, monitoring and control for industrial automation and networking, Red Lion has been delivering innovative solutions for over forty years. Our award-winning Asia-Pacific technology enables companies worldwide to gain real-time data FLEXI B LE.LE. RE LIA LE. ERFEUL. [email protected] F LEXIB R E LBI A BL POW ELion, . P OW RFU visibility that drives productivity. Product brands include Red Sixnet, Sixnet,LLC LLCCorporate CorporateHeadquarters Headquarters N-Tron and Sixnet. With headquarters in York, Pennsylvania, the TT +1 +1 518518 877 5173 877877 8346 331 NY 12019 Europe © 2011 Sixnet. All Rights Reserved. DEC2013 877 5173 F +1 F 518 +1 518 8346 331Ushers UshersRoad, Road,Ballston BallstonLake, Lake, NY 12019 © 2011 Sixnet. All Rights Reserved. DEC2013 company has offices across the Americas, Asia-Pacific and Europe. Middle East For more information, please visit www.redlion.net. Red Lion is a Africa w w w. re d l i o n . n e t Spectris company. [email protected] Connect. Monitor. Control. ADLD0181 122313 © 2013 Red Lion Controls +1 (717) 767-6511 Americas [email protected]