DET01 1W DC-DC Unregulated Dual Output Converter series Features : 3000VDC I/O isolation Internal SMD technology Protection: Short circuit Cooling by free air convection Non-conductive plastic case SMD package styles 100% full load burn-in test Low cost / High reliability Approved: UL / CUL 1 year warranty SPECIFICATION ORDER NO. OUTPUT CURRENT RANGE OUTPUT DET01M-05 DET01L-05 DC OUTPUT VOLTAGE DET01L-09 5V 100mA EFFICIENCY 72% RATED POWER 1W DET01M-09 9V DET01M-12 12V DET01L-15 DET01M-15 15V 42mA 56mA 71% DET01L-12 33mA 75% 73% 78% 74% 79% 75% 10.8 ~ 13.2V 12V 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 12V 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 12V 4.5 ~ 5.5V 5V 10.8 ~ 13.2V 12V 122mA 280mA 122mA 280mA 122mA 280mA 122mA 18mA 29mA 18mA 29mA 18mA 29mA 29mA RIPPLE & NOISE (max.) Note.2 100mVp-p LINE REGULATION Note.3 1.2% for 1% input variation LOAD REGULATION Note.4 8.0% VOLTAGE TOLERANCE 8.0% SWITCHING FREQUENCY(Typ.) 100KHz 4.5 ~ 5.5V 5V VOLTAGE RANGE NORMAL VOLTAGE Full load 280mA No load 29mA INPUT CURRENT Fuse recommended PROTECTION Momentary OVERLOAD Protection type : Broken Momentary PROTECTION SHORT CIRCUIT Protection type : Broken WORKING TEMP. -40 ~ +85 WORKING HUMIDITY 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC ISOLATION RESISTANCE MTBF OTHERS DIMENSION (Refer to output load derating curve) -40 ~ +105 I/P-O/P:3KVDC I/P-O/P: 100M Ohms / 500VDC / 25 Mechanical Specification Unit: mm (inch) 15.24 2 3 5 6 0.5 4 .1 3 6.25 7 6.00 7.50 11.2 MAX 1 NOTE 8 TOP VIEW 2.54 / 70% RH 500khrs min. MIL-HDBK-217F(25 ) 15.24*7.5*6.0mm or 0.60"*0.30"*0.24" inch (L*W*H) 1.7g WEIGHT 12 11 1 0 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes UL60950-1, CSA C22.2 2.54 0 .2 5 Derating Curve Pin Configuration Pin No. Output 1 2 3 5 6 7 8 10 11 12 -Vin +Vin NC COM -Vout NC +Vout NC NC NC 100 LOAD (%) INPUT 80 -40 0 25 50 70 85 100 Ta ( ) 1.All parameters are specified at normal input, rated load, 25 70% RH. Ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 20% to 100% rated load. File Name: DET01-SPEC 2008-05-08