DomiLED InGaN • High brightness surface mount LED. • Based on InGaN technology. • 120° viewing angle. • Small package outline (LxWxH) of 2.8 x 3.2 x 1.8 mm. • Qualified according to JEDEC moisture sensitivity Level 2. • Compatible to both IR reflow soldering and TTW soldering. 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 1 of 1 Part Ordering Number Chip Technology / Color InGaN / • • • • Viewing angle Luminous Intensity @ If = 20mA Iv ( mcd ) 120 45.0 … 112.5 45.0 … 56.0 56.0 … 71.5 71.5 … 90.0 90.0 … 112.5 Blue, 470 nm 71.5 … 180.0 71.5 … 90.0 90.0 … 112.5 112.5 … 140.0 140.0 … 180.0 • • • • 112.5 … 224.0 • • 112.5 … 140.0 140.0 … 180.0 180.0 … 224.0 • InGaN / • • • • 120 Cyan, 505 nm 112.5 … 285.0 112.5 … 140.0 140.0 … 180.0 180.0 … 224.0 224.0 … 285.0 180.0 … 450.0 • • • 180.0 … 224.0 224.0 … 285.0 285.0 … 355.0 355.0 … 450.0 • 285.0 … 560.0 285.5 … 355.0 355.0 … 450.0 450.0 … 560.0 • • • 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 2 of 2 Part Ordering Number Chip Technology / Color InGaN / • • • • Viewing angle Luminous Intensity @ If = 20mA Iv ( mcd ) 120 112.5 … 285.0 112.5 … 140.0 140.0 … 180.0 180.0 … 224.0 224.0 … 285.0 True Green, 525 nm 180.0 … 450.0 180.0 … 224.0 224.0 … 285.0 285.0 … 355.0 355.0 … 450.0 • • • • 285.0 … 715.0 • • • 285.0 … 355.0 355.0 … 450.0 450.0 … 560.0 560.0 … 715.0 • InGaN / • • • • 120 White 112.5 … 285.0 112.5 … 140.0 140.0 … 180.0 180.0 … 224.0 224.0 … 285.0 180.0 … 355.0 180.0 … 224.0 224.0 … 285.0 285.0 … 355.0 • • • 180.0 … 450.0 180.0 … 224.0 224.0 … 285.0 285.0 … 355.0 355.0 … 450.0 • • • • 285.0 … 715.0 285.0 … 355.0 355.0 … 450.0 450.0 … 560.0 560.0 … 715.0 • • • • 450.0 … 900.0 450.0 … 560.0 560.0 … 715.0 715.0 … 900.0 • • • 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 3 of 3 Part Ordering Number Chip Technology / Color Viewing angle Luminous Intensity @ If = 20mA Iv ( mcd ) 560.0 … 1125.0 560.0 … 715.0 715.0 … 900.0 900.0 … 1125.0 NOTE: 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ±11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table. Electrical Characteristics at Ta=25°C. Vf @ If = 20mA Part Number Vr @ Ir = 10uA Min. (V) Typ. (V) Max. (V) Min.(V) 3.0 & 2.9 * 3.2 3.8 5 3.0 3.4 4.0 5 Forward voltage, Vf is measured with an accuracy of ±0.1 V. 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 4 of 4 Wavelength Grouping. Color Group Wavelength distribution (nm) Full 464 - 476 W 464 - 468 X 468 - 472 Y 472 - 476 Full 499 - 511 W 499 - 503 X 503 - 507 Y 507 - 511 Full 520 - 536 W 520 - 524 X 524 - 528 Y 528 - 532 Z 532 - 536 Dominant wavelength is measured with an accuracy of ±1 nm. 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 5 of 5 Dominant White Bin Structure 0.43 0.42 0.41 0.40 E3 0.39 0.38 E4 E1 0.37 0.36 E2 C3 0.35 0.34 C1 C4 0.33 0.32 C2 A3 0.31 0.30 A4 A1 0.29 0.28 A2 0.27 0.26 0.25 0.24 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 Chromaticity coordinate groups are measured with an accuracy of ±0.01. Bin A1 A2 A3 A4 C1 C2 C3 C4 Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy Cx Cy 06/06/05 0.2775 0.2732 0.2775 0.2557 0.2900 0.2939 0.2900 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 W 0.2900 0.2939 0.2900 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 0.3275 0.3561 0.3275 0.3386 0.2900 0.3114 0.2900 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 0.3275 0.3736 0.3275 0.3561 0.2775 0.2907 0.2775 0.2732 0.2900 0.3114 0.2900 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 Bin E1 Cx Cy E2 Cx Cy E3 Cx Cy E4 Cx Cy 0.3275 0.3561 0.3275 0.3386 0.3400 0.3768 0.3400 0.3593 DomiLED InGaN DDx-xJx - Catalogue-v8 X 0.3400 0.3768 0.3400 0.3593 0.3525 0.3975 0.3525 0.3800 0.3400 0.3943 0.3400 0.3768 0.3525 0.4150 0.3525 0.3975 0.3275 0.3736 0.3275 0.3561 0.3400 0.3943 0.3400 0.3768 Page 6 of 6 Vf Binning (Optional). Vf Bin @ 20mA Forward voltage (V) 00 3.05 … 3.35 01 3.35 … 3.65 02 3.65 … 3.95 03 3.95 … 4.25 Forward voltage, Vf is measured with an accuracy of ±0.1 V. Absolute Maximum Ratings. Maximum Value Unit DC forward current. 20 mA Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.005) 200 mA Reverse voltage. 5 V ESD Threshold (HBM) 2000 V LED junction temperature. 125 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C 85 mW Power dissipation ( at room temperature ) 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 7 of 7 Recommended Solder Pad 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 8 of 8 Relative luminous intensity vs. forward current. Forward current vs. forward voltage. Intensity vs. DC Forward Current Forward Current vs Voltage 2.2 50 2 1.8 40 1.6 1.4 If (mA) Relative intensity. Normalized at 20 mA. 60 1.2 1 0.8 30 20 0.6 0.4 10 0.2 0 0 10 20 30 40 0 50 2.0 FORWARD CURRENT (mA) 2.5 3.0 3.5 4.0 4.5 Vf (volts) Maximum current vs. temperature. Radiation pattern. 30° 20° 10° 0° 25 1.0 40° 20 50° 0.6 60° 0.4 Forward Current, If 0.8 15 10 5 70° 0.2 0 80° 0 10 20 30 90° Relative Intensity vs. Wavelength 60 70 80 90 100 Dominant Wavelength vs. Forward Current 1.0 0.9 White Dom. WL (nm) Relative Intensity 50 Dominant Wavelength vs. Forward Current Relative Spectral Emission 0.8 40 Ambient Temperature 0 0.7 Blue 0.6 0.5 True Green 0.4 0.3 476 540 475 538 536 474 534 True Green 473 532 472 530 528 Blue 471 526 470 524 0.2 469 0.1 0.0 400 522 468 450 500 550 600 650 700 750 800 520 0 Wavelength (nm) 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 5 10 15 20 25 IF (mA) Page 9 of 9 30 Taping And Orientation. Reels come in quantity of 8000 units or 2000 units. Reel diameters are 330 mm and 180 mm respectively. 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 10 of 10 Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 275 250 235-240oC 10-30s Temperature (oC) 225 200 Ramp-up 3 oC/sec max. o 183 C 175 60-150s 150 125 Ramp-down 6 oC/sec max. 100 Preheat 60-120s 75 50 360s max 25 0 50 100 150 200 Time (sec) Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 300 275 Temperature ( oC) 250 Ramp-up 3 oC/sec max. 217 oC 225 260-255oC 10-30s 200 60-150s 175 150 125 Ramp-down 6 oC/sec max. 100 Preheat 60-180s 75 50 480s max 25 0 50 100 150 200 Time (sec) 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 11 of 11 Recommended TTW Soldering Profile. 06/06/05 DomiLED InGaN DDx-xJx - Catalogue-v8 Page 12 of 12