RGB Chip LED IN-B101FCH INolux RGB CHIP LED Data Sheet IN-B101FCH Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 1/16 RGB Chip LED IN-B101FCH DISCLAIMER ......................................................................................................................................... 3! PRODUCT SPECIFICATIONS ............................................................................................................ 4! ATTENTION: ELECTROSTATIC DISCHARGE (ESD) PROTECTION ............................................... 5! LABEL SPECIFICATIONS .................................................................................................................. 5! SPECIFICATIONS RANGE .................................................................................................................. 6! PRODUCT FEATURES ......................................................................................................................... 8! ELECTRO-OPTICAL CHARACTERISTICS ...................................................................................... 8! PACKAGE OUTLINE DIMENSION & RECOMMENDED SOLDERING PATTERN FOR SOLDERING ........... 8! ABSOLUTE MAXIMUM RATINGS ................................................................................................. 9! CHARACTERISTICS OF IN-B101FCH ...................................................................................... 10! PACKAGING ........................................................................................................................................ 11! TAPE DIMENSION ................................................................................................................... 11! REEL DIMENSION ................................................................................................................... 12! PRECAUTIONS .................................................................................................................................... 13! REVISION HISTORY .......................................................................................................................... 16! Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 2/16 RGB Chip LED IN-B101FCH DISCLAIMER INOLUX reserves the right to make changes without further notice to any products herein to improve reliability, function or design. INOLUX does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY INOLUX’s products are not authorized for use as critical components in life support devices or systems without the express written approval of the President of INOLUX or INOLUX CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 3/16 RGB Chip LED IN-B101FCH Product Specifications Specification Iv Material Quantity R: 58 mcd typical G: 85 mcd typical B: 17 mcd typical R@10mA; G/B@5mA / Ta= 25°C; Tolerance ±10% 0) R: 621 nm typical G: 529 nm typical B: 470 nm typical R@10mA;(G/B@5mA(/(Ta=(25°(C;(Tolerance(±(0.5nm( Vf R: 2.4 V maximum G: 3.4 V maximum B: 3.4 V maximum R@10mA;(G/B@5mA(/(Ta=(25O(C;(Tolerance(±(0.05V( Ir <100uA@ VR=5V Resin Dark Epoxy Resin Carrier tape EIA 481-1A specs Conductive black tape Reel EIA 481-1A specs Conductive black Label HT standard Paper Packing bag 250x230mm Aluminum laminated bag/ 24000 pcs/reel One reel per bag no-zipper Carton HT standard Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Paper Non-specified Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 4/16 RGB Chip LED IN-B101FCH Others: Each immediate box consists of 5 reels. The 5 reels may not necessarily have the same lot number or the same bin combinations of Iv, 0) and Vf. Each reel has a label identifying its specification; the immediate box consists of a product label as well. ATTENTION: Electrostatic Discharge (ESD) protection The symbol to the left denotes that ESD precaution is needed. ESD protection for GaP and AlGaAs based chips is necessary even though they are relatively safe in the presence of low static-electric discharge. Parts built with AlInGaP, GaN, or/and InGaN based chips are STATIC SENSITIVE devices. ESD precaution must be taken during design and assembly. If manual work or processing is needed, please ensure the device is adequately protected from ESD during the process. Label Specifications INolux P/N: I N - B Product( 1 0 1 F C H Package( Color( X X X X Customer(Code( IN:( B101:( FCH:( ( XXXX:( INolux(Technologies( 1.0((L)(x(1.0((W)(x(0.65((H)(mm( RGB( Customer(Specific(Code( ( Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 5/16 RGB Chip LED IN-B101FCH Lot No.: Specifications Range ■Luminous Intensity (Iv) Bin : Note: It maintains a tolerance of ±10% on luminous intensity Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 6/16 RGB Chip LED IN-B101FCH ■Color Bin: Note: It maintains a tolerance of + 0.5nm on color ■Forward Voltage (Vf) Bin: Note: It maintains a tolerance of ±0.05V on forward voltage measurements Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 7/16 RGB Chip LED IN-B101FCH Product Features Electro-Optical Characteristics , Emitting Series IN-B101FCH VF(V) Wavelength λ(nm) IV(mcd) 2θ1/2 Color Typ. Max. Red 2.0 2.4 621 629 16 58 140 Green 2.8 3.4 531 520 32 85 140 Blue 3.0 3.4 470 480 22 17 140 D Typical P Package Outline Dimension & Recommended Soldering Pattern for Soldering Outline Dim. Soldering Pattern Soldering terminals may shift in the x, y direction. Unit: mm Tolerance: +/-0.1mm Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 8/16 ( RGB Chip LED IN-B101FCH Absolute Maximum Ratings , Series ( o Pd (mW) IF (mA) IFP (mA) IR (uA) TOP ( C) Power Forward Pulse Forward Operating Storage Color Dissipation Current Current Temperature Temperature Red 150 10 60 -30~+80 -40~+85 Blue 150 5 60 -30~+80 -40~+85 Green 150 5 60 -30~+80 -40~+85 ** Condition for IFP is pulse of 1/10 duty and 0.1msec width Remarks: This product should be operated in forward bias. If a reverse voltage is continuously applied to the product, such operation can cause migration resulting in LED damage. Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 9/16 RGB Chip LED IN-B101FCH Characteristics of IN-B101FCH Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 10/16 RGB Chip LED IN-B101FCH Packaging Tape Dimension Dim. A Dim. B Dim. C 1.22±0.05 1.22±0.05 0.78±0.05 Q’ty/Reel 24K Unit: mm Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 11/16 RGB Chip LED IN-B101FCH Reel Dimension Unit: mm Tolerance: +/-0.15mm Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 12/16 RGB Chip LED IN-B101FCH Precautions Please read the following notes before using the product: 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 80%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 60%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture adsorbent material has fabled away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5 for 24 hours. Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 13/16 RGB Chip LED IN-B101FCH 3. Soldering Condition When soldering, for Lamp without stopper type and must be leave a minimum of 3mm clearance from the base of the lens to the soldering point. To avoided the Epoxy climb up on lead frame and was impact to non-soldering problem, dipping the lens into the solder must be avoided. Do not apply any external stress to the lead frame during soldering while the LED is at high temperature. Recommended soldering conditions: Soldering Iron Temperature 300 Soldering Time Lead Free Wave Soldering Max. Pre-heat 150 Max. 3 sec. Max. Pre-heat Time 120 sec. Max. (One time only) Solder Wave 260 Soldering Time 10 sec. Max. Max. Note: Excessive soldering temperature and / or time might result in deformation of the LED lens or catastrophic failure of the LED. Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 14/16 RGB Chip LED IN-B101FCH 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 260 for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 6. Caution in ESD Static Electricity and surge damages the LED. It is recommended to use a wristband or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 15/16 RGB Chip LED IN-B101FCH Revision History Changes since last revision Initial release Official Product IN Part No. IN-B101FCH Preliminary Product **************** Specifications are subject to change without notice. Data and drawings herein are copyrighted. Page Version No. Revision Date - 1.0 04-10-2015 Customer Part No. Data Sheet No. **************** April 10, 2015 IN-B101FCH Version of 1.0 Page 16/16