Series AM2D-NZ 2 Watt | DC-DC Converter FEATURES: • • • • RoHS Compliant Low ripple and noise High efficiency up to 87% UL94-VO case Models Single output Model Input Voltage (V) AM2D-0505S-NZ AM2D-0509S-NZ AM2D-0512S-NZ AM2D-0515S-NZ AM2D-1205S-NZ AM2D-1209S-NZ AM2D-1212S-NZ AM2D-1215S-NZ AM2D-2405S-NZ AM2D-2409S-NZ AM2D-2412S-NZ AM2D-2415S-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 AM2D-0505SH30-NZ AM2D-0509SH30-NZ AM2D-0512SH30-NZ AM2D-0515SH30-NZ AM2D-1205SH30-NZ AM2D-1209SH30-NZ AM2D-1212SH30-NZ AM2D-1215SH30-NZ AM2D-2405SH30-NZ AM2D-2409SH30-NZ AM2D-2412SH30-NZ AM2D-2415SH30-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 Models Dual output Model AM2D-0505D-NZ AM2D-0509D-NZ AM2D-0512D-NZ AM2D-0515D-NZ AM2D-1205D-NZ AM2D-1209D-NZ AM2D-1212D-NZ AM2D-1215D-NZ AM2D-2405D-NZ AM2D-2409D-NZ AM2D-2412D-NZ AM2D-2415D-NZ AM2D-0505DH30-NZ AM2D-0509DH30-NZ www.aimtec.com F 051e R11.H Input Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 4.5-5.5 4.5-5.5 Output Voltage (V) • • • • Input / Output Isolation 1000, 3000VDC o o Operating temperature -40 C to + 75 C Pin compatible with multiple manufacturers 7 pin SIP package Output Current max (mA) Isolation (VDC) Efficiency (%) 5 9 12 15 5 9 12 15 5 9 12 15 400 222 167 134 400 222 167 134 400 222 167 134 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 81 82 84 84 82 83 85 85 83 84 86 86 5 9 12 15 5 9 12 15 5 9 12 15 400 222 167 134 400 222 167 134 400 222 167 134 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 80 81 82 84 80 83 84 85 81 84 85 86 Output Current max (mA) Isolation (VDC) Efficiency (%) ±200 ±111 ±83 ±67 ±200 ±111 ±83 ±67 ±200 ±111 ±83 ±67 ±200 ±111 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 3000 3000 82 83 85 85 83 84 86 86 84 85 87 87 82 83 Output Voltage (V) ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±5 ±9 Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only11 Series AM2D-NZ 2 Watt | DC-DC Converter Models Dual output (continue) Model AM2D-0512DH30-NZ AM2D-0515DH30-NZ AM2D-1205DH30-NZ AM2D-1209DH30-NZ AM2D-1212DH30-NZ AM2D-1215DH30-NZ AM2D-2405DH30-NZ AM2D-2409DH30-NZ AM2D-2412DH30-NZ AM2D-2415DH30-NZ 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 Input Specifications Parameters Voltage range Filter Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Output Specifications Parameters Voltage accuracy Voltage balance Short Circuit protection Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Output Voltage (V) Input –Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) ±83 ±67 ±200 ±111 ±83 ±67 ±200 ±111 ±83 ±67 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 85 85 83 84 86 86 84 85 87 87 ±12 ±15 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 Nominal Typical 5 12 24 4.5-5.5 10.8-13.2 21.6-26.4 Conditions Typical 60 sec Rated At 20MHz Bandwidth Typical VDC MOhm pF Maximum Units % % % % % o %/ C mV p-p Maximum 85 Units 1000 and 3000 See tolerance graph ±1 Momentary (1 sec) ±1.2 ±1.2 ±8 ±8 ±0.03 100 For 1.0% of Vin For 1.0% of Vin Load 10~100% Load 10~100% 100% load Capacitor Typical Dual output Units VDC > 1000 60 Conditions Conditions Maximum -40 to +75 -55 to +125 Free air convection Plastic UL94-VO Units +95 KHz o C o C o C 90 % g 2.5 0.76 x 0.24 x 0.37 inch 19.50 x 6.00 x 9.50 mm Dimensions (L x W x H) 0.76 x 0.28 x 0.37 inch 19.50 x 7.05 x 9.50 mm o MTBF >800 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. www.aimtec.com F 051e R11.H 1000VDC isolation 3000VDC isolation Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only11 Series AM2D-NZ 2 Watt | DC-DC Converter Safety Specifications Parameters cULus,(entire series) CE (for 3000 Isolated models and dual output models 1000VDC isolation) IEC60950-1 :2001 Agency approvals Standards Pin Out Specifications Pin 1 2 4 5 6 7 1000VDC Single Dual + V Input - V Input -V Output No pin + V Output No pin 3000VDC Single Dual + V Input - V Input - V Output Common + V Output No pin + V Input - V Input No pin -V Output No pin +V Output + V Input - V Input No pin -V Output Common +V Output Dimensions 1000Vdc Isolation 3000Vdc Isolation 19.50 (0.76) 19.50 (0.76) 6.00 (0.24) 7.05 (0.28) PRINTED FACE PRINTED FACE 9.50 (0.37) 0.50 (0.02) 10.00 (0.39) 9.50 (0.37) 10.00 (0.39) 4.10 (0.16) 2.54 (0.10) 15.20 (0.60) 6.00 (0.24) 0.50 (0.02) 2.54 (0.10) 4.10 (0.16) 15.20 (0.60) 0.50 (0.02) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 7.05 (0.28) 0.25 (0.01) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.25 (0.01) 1.25 (0.05) 1.25 (0.05) Typical characteristics Tolerance Envelope Graph +10% Typic a +5% l load line +2.5% Output Voltage (%) -2.5% Nominal Voltage -7.5% 10% 50% 100% Output Current (%) www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only11 Series AM2D-NZ 2 Watt | DC-DC Converter Filtering Single Filtering Dual External capacitor – Single output Vin (VDC) 5 12 24 - External capacitor (uF) Vout (VDC) 4.7 2.2 1 - 5 9 12 15 External capacitor – Dual output External capacitor (uF) Vin (VDC) 10 4.7 2.2 1 5 12 24 - External capacitor (uF) 4.7 2.2 1 - Vout (VDC) 5 9 12 15 External capacitor (uF) 4.7 2.2 1 0.47 Derating Free Air Convection 75º C Output Power (%) 100 80 Safe Operating Area 60 40 20 0 - 40 - 20 0 20 40 60 80 85 100 Ambient Temperature º C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.H Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only11