Bourns CR0402-JX8252G Chip resistor Datasheet

oH
V SC
AV ER OM
AI SIO PL
LA N IA
BL S NT
E
Features
■
*R
■
■
■
■
Small package dimensions
Lead free version available (see How to
Order “Termination” options)
RoHS compliant*
Power rating at 70 °C = 1/16 W
Tight dimensional tolerances
■
■
■
Three layer termination process with
nickel barrier prevents leaching and
provides excellent solderability
Suitable for most types of soldering
processes
Standard packaging on paper tape and
reel
CR0402 - Chip Resistor
Derating Curve
Rated power in percentage (%)
Electrical Characteristics
Power Rating @ 70 °C.................1/16 W
Operating Temperature Range
.................................-55 °C to +125 °C
Derated to 0 Load at .................+125 °C
Maximum Working Voltage ..............25 V
Maximum Overload Voltage ............50 V
Resistance Range
1 %, E-96 and E-24
..........................10 ohms to 1 megohm
5 %, E-24
.......................2 ohms to 5.6 megohms
Zero Ohm Jumper..............<0.05 ohms
Temperature Coefficient
1 % ..................................±100 ppm/°C
5 % ..................................±200 ppm/°C
1 ohm to 10 ohms
..............-200 ppm/°C to +500 ppm/°C
100
80
60
40
20
0
-55
0
125
70
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
Dimensional Drawings
0.20 ± 0.10
(0.008 ± 0.004)
Resistor (Ru02)
(Jumper chip is
a conductor)
0.20 ± 0.10
(0.008 ± 0.004)
Overcoat
0.35 ± 0.05
(0.014 ± 0.002)
0.25 ± 0.10
(0.010 ± 0.004)
0.25 ± 0.10
(0.010 ± 0.004)
1.00 ± 0.10
(0.040 ± 0.004)
0.50 ± 0.05
(0.020 ± 0.002)
Alumina Substrate
Internal Electrode (Ag-Pd)
Secondary Electrode (Nickel Plated)
DIMENSIONS ARE:
MM
(INCHES)
External Electrode
(see Part Numbering - may be
ordered as solder-plated
or tin-plated)
Characteristic Data
∆ R/R
(%)
3.0
2.0
1.0
0
∆ R/R
(%)
10
100 1K 10K 100K 1M
Resistance Value (Ω)
Short Time Overload
Moisture Load Life 1000Hr
Load Life 1000Hr
3.0
2.0
1.0
0
∆ R/R
(%)
10
100 1K 10K 100K 1M
Resistance Value (Ω)
1.0
0.5
0
-0.5
10
100 1K 10K 100K 1M
Resistance Value (Ω)
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
CR0402 - Chip Resistor
Soldering Profile for Lead Free Chip Resistors and Arrays
275
<1> Maximum of 20 seconds between
260 °C peak
+255 °C and +260 °C
<1> 255 °C
225
Temperature (°C)
220 °C
190 °C
175
60 - 90
seconds
Ramp Down
3 °C/second
150 °C
125
60 - 120 seconds
10 seconds minimum
75
Ramp Up
3 °C/second maximum
25
0
50
100
150
Time (seconds)
200
250
300
Packaging Dimensions (Conforms to EIA RS-481A)
1.0 ± 0.2
(.040 ± .020)
1.5 + 0.1/-0 DIA.
(0.059 + 0.004/-0)
0.45 ± 0.1
(0.018 ± 0.004)
4.0 ± 0.1
(0.157 ± 0.004)
1.75 ± 0.1
(0.069 ± 0.004)
0.65 ± 0.1
(0.026 ± 0.004)
2.0
(.080)
13.0 ± 0.5
(.512 ± .020)
3.5 ± 0.05
(0.138 ± 0.002)
1.15 ± 0.1
(0.045 ± 0.004)
80.0 ± 1.0
(3.150 ± .040)
8.0 ± 0.2
(0.315 ± 0.008)
2.0 ± 0.1
(0.079 ± 0.004)
Paper
(Punched)
20.5
(.807)
178.0 ± 2.0
(7.008 ± .080)
Direction of Feeding
DIMENSIONS ARE:
MM
(INCHES)
10.0 ± 1.5
(.394 ± .059)
Part Marking System
No Marking on the CR0402 Chip Resistors.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
CR0402 - Chip Resistor
How To Order
CR 0402 - F X - 8252 G __
Model
(CR = Chip Resistor)
Size
• 0402
Resistance Tolerance
F = ±1 % ............Used with “X” TCR code only for values from 10 ohms through 1 megohm.
J = ±5 % ..............Used with “W” TCR code for values from 10 ohms through 5.6 megohms. Used with “/” TCR code for zero ohm (jumper)
......................and for values from 1 ohm through 9.1 ohms.
TCR (ppm/°C)
X = ±100 ..............Used with “F” Resistance Tolerance code only for values from 10 ohms through 1 megohm.
W = ±200 ..............Used with “J” Resistance Tolerance code only for values from 10 ohms through 5.6 megohms.
/ = -250 to +500 ..Used with “J” Resistance Tolerance code only for zero ohm (jumper), and for values from 1 ohm through 9.1ohms.
Resistance Value
For 1 % Tolerance:
<100 ohms..............“R” designates decimal point (example: 24R3 = 24.3 ohms)
≥100 ohms ..............First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5k ohms).
For 5 % Tolerance:
<10 ohms................“R” designates decimal point (example: 4R7 = 4.7 ohms)
≥10 ohms ................First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470k ohms; 000 = Jumper).
Packaging
G = Paper Tape (10,000 pcs.) on 7 “ Plastic Reel
Termination
LF = Tin-plated (lead free)
__ = Solder-plated
REV. 04/06
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
Similar pages