Corporate: www.cdtechno.com Product: www.cdpoweronline.com HPR1XX 0.75 Watt Single Output DC/DC Converter The HPR1XX Series uses advanced circuit design and packaging technology to deliver superior reliability and performance. A 170kHz push-pull oscillator is used in the input stage. Beat-frequency oscillation problems are reduced when using the HPR1XX Series with high frequency isolation amplifiers. Reduced parts count and high efficiency add to the reliability of the Low Cost Multiple Package Styles Internal Input and Output Filtering Non-Conductive Case HPR1XX Series. The high efficiency of the HPR1XX Series means less internal power dissipation, as low as 190mW. With reduced heat dissipation the HPR1XX Series can operate at higher temperatures with no degradation. In addition, the high efficiency of the HPR1XX Series means the series is able to offer greater than 10 W/inch3 of output power density. Operation down High Output Power Density: 10 Watts/Inch3 Extended Temperature Range: -25°C to +85°C Efficiency to 79% to no load will not impact the reliability of the series, although a >1mA minimum load is needed to realize published specifications. The HPR1XX Series provides the user a low cost converter without sacrificing reliability. The use of surface mounted devices and advanced manufacturing technologies make it possible to offer premium performance and low cost. SPECIFICATIONS All specifications are typical at TA = +25°C nominal input voltage unless otherwise specified. PRODUCT SELECTION CHART MODEL NOMINAL INPUT VOLTAGE (VDC) RATED OUTPUT VOLTAGE (VDC) RATED OUTPUT CURRENT (mA) INPUT CURRENT NO LOAD (mA) HPR100 HPR101 HPR102 HPR103 HPR104 HPR105 HPR106 HPR107 HPR108 HPR109 HPR110 HPR111 HPR112 HPR113 HPR114 HPR115 HPR116 HPR117 HPR118 HPR119 HPR120 HPR121 HPR122 HPR123 5 5 5 5 5 5 12 12 12 12 12 12 15 15 15 15 15 15 24 24 24 24 24 24 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 5 12 15 ±5 ±12 ±15 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 150 62 50 ±75 ±30 ±25 20 20 20 20 20 20 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 RATED LOAD (mA) REFLECTED RIPPLE CURRENT (mAp-p) EFFICIENCY (%) 216 212 212 218 212 200 90 81 81 88 81 81 72 72 72 72 63 63 48 48 45 45 45 45 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 15 15 15 15 15 15 69 70 71 68 68 75 69 77 77 71 74 77 69 69 69 69 76 79 65 65 76 69 67 69 Note: Other input to output voltages may be available. Please contact factory. Product: www.cdpoweronline.com HPR1XX REV M 4/03 1 SPECIFICATIONS, ALL MODELS Specifications are at TA = +25°C nominal input voltage unless otherwise specified. PARAMETER CONDITIONS MIN TYP MAX UNITS GENERAL OUTPUT INPUT INPUT Voltage Range 4.5 5 5.5 VDC 10.8 12 13.2 VDC 13.5 15 16.5 VDC 21.6 24 26.4 VDC Voltage Rise Time See Typical Performance Curves & Application Notes: "Capacitive Loading Effects on Start-Up of DC/DC Converters" OUTPUT Rated Power 750 mW ±5 % Voltage Setpoint Accuracy Rated Load, Nominal VIN Ripple & Noise BW = DC to 10MHz 45 mVp-p BW =10Hz to 2MHz 30 mVrms HPR103 BW = DC to 10MHz 90 mVp-p Voltage (Over Input Voltage Range) 1mA Load, VOUT = 5V 7 VDC 15 VDC 1mA Load, VOUT = 12V 1mA Load, VOUT = 15V 18 VDC Temperature Coefficent .01 %/°C REGULATION Line Regulation High Line to Low Line 1 %/%Vin GENERAL ISOLATION Rated Voltage 750 VDC Test Voltage 60 Hz, 10 Seconds 750 Vrms (1060pk) Resistance 10 GΩ Capacitance 25 100 pF Leakage Current VISO= 240VAC, 60Hz 2 8.5 µArms Switching Frequency 170 kHz Frequency Change Over Line and Load 24 % Package Weight 2 g MTTF per MIL-HDBK-217, Rev. E* Circuit Stress Method Ground Benign TA = +25°C 7.9 MHr Fixed Ground TA = +35°C 1.9 MHr 1.2 MHr Naval Sheltered TA = +35°C Airborne Uninhabited Fighter TA = +35°C 300 kHr TEMPERATURE Specification -25 +25 +85 °C Operation -40 +100 °C Storage -40 +110 °C * For demonstrated MTTF results reference: Power Convertibles Reliability Report HPR105. RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE 30 sec MAX (>220°C) 0.100" (2.54) 250 235 °C MAX 14 13 11 10 9 8 220 200 0.730" (18.54) 0.040" (1.02) TEMPERATURE (°C) 190 0.080" (2.03) 150 100 90 sec MAX (>190°C) 1 2 3 4 5 6 7 50 0.650" (16.51) TIME (seconds) Product: www.cdpoweronline.com HPR1XX REV M 4/03 2 TYPICAL PERFORMANCE CURVES Specifications are at TA = +25°C nominal input voltage, nominal load, recommended external components applied, unless otherwise specified. (Refer to Application Note DCAN-9 at www.cdpoweronline.com) VOUT VS LOAD (5Vout Models) VOUT VS LOAD (±5Vout Models) 5.7 5.4 5.5 5.2 VOUT VS LOAD (12Vout Models) 12.5 5.3 12.3 Vout Vout Vout 12.4 5.0 12.2 12.1 5.1 4.8 4.9 4.6 12.0 0 80 40 120 160 11.9 0 20 Output Current (mA) 40 60 0 80 Output Current each load (mA) VOUT VS LOAD (±12Vout Models) VOUT VS LOAD (15Vout Models) 12.6 60 80 16.5 16.0 15.7 12.4 15.5 12.3 15.5 Vout Vout Vout 40 VOUT VS LOAD (±15Vout Models) 15.9 12.5 15.0 12.2 15.3 14.5 12.1 15.1 14.0 12.0 14.9 0 10 20 30 13.5 40 0 20 40 60 80 Output Current each load (mA) Output Current each load (mA) EFFICIENCY VS LOAD OSCILLATION FREQUENCY VS TEMPERATURE 90 0 0.2 0.4 0.6 0.8 1.0 Output Power each load (Watts) 220 Frequency (KHz) 75 Efficiency (%) 20 Output Current each load (mA) 60 45 30 15 200 180 160 0 20 0 60 40 140 80 -30 100 0 % of Rated Load (%) 30 60 90 Temperature (°C) SAFE OPERATING AREA LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 600 50 Total Load Capacitance (uF) Total Load Capacitance (uF) 500 400 300 SAFE OPERATING AREA 200 40 30 SAFE OPERATING AREA 20 10 100 0 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) NOTES: LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HPR1XX devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steadystate value. 80 70 60 50 SAFE OPERATING AREA 40 0 50 90 Total Load Capacitance (uF) LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 60 30 20 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) Product: www.cdpoweronline.com HPR1XX REV M 4/03 3 MECHANICAL "SIP" PACKAGE/PINOUT 0.240 +0.010” (6.09 +0.25) 0.77 +0.010” (19.56 +0.25) FRONT VIEW RIGHT SIDE VIEW 0.400 +0.010” (10.16 +0.25) 1 2 4 *5 0.020 +0.010” (0.51 +0.25) 6 *Common pin not present on single output models. PIN CONNECTIONS 0.140” MIN (3.56) 0.02 +0.002” (0.51 +0.05) Notes: All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: ± 0.015" 0.01 +0.002” (0.25 +0.05) 0.035 +0.015” (0.89 +0.38) 0.18 +0.015” (4.57 +0.38) 1. 2. 4. 5. 6. BOTTOM VIEW +VIN -VIN -VOUT COM* +VOUT PACKAGE/PINOUT "V" AND "W" DIP PACKAGE SMD PACKAGE 0.785±0.010" (19.94±0.25) 11 10 9 8 14 13 0.525±0.010" (13.34±0.25) 0.785±0.010" (19.94±0.25) 14 13 TOP VIEWS 0.695±0.015" (17.65±0.38) HPR1XXV 0.525±0.010" (13.34±0.25) 1 2 3 4 5 6 7 SIDE VIEWS 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) 0.600" (15.24) 1 2 3 4 5 6 +VIN -VIN NC NC -VOUT NC DUALS +VIN -VIN NC NC -VOUT Common PIN# 7 8 9 10 11 13 14 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) END VIEWS 0.014±0.002" (0.36±0.05) PIN CONNECTIONS SINGLES 0.695±0.015" (17.65±0.38) 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0°-15° PIN# HPR1XXW 1 2 3 4 5 6 7 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 11 10 9 8 .015±.010" (.38±.26) NOTES: SINGLES +VOUT NC NC NC NC NC NC DUALS NC = Do Not Connect. +VOUT NC NC NC NC NC NC Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation ................................. 450mW ShortCircuitDuration ........................................... Momentary Lead Temperature (soldering, 10 seconds max .+300°C * * NOTE: Refer to Reflow Profile for SMD Models. ORDERING INFORMATION HPR 1XX V/W Device Family HPR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics Package Option There is "no" package designator for the SIP package V = DIP Package W = SMD Package Power Electronics Division, Americas 3400 E Britannia Drive, Tucson, Arizona 85706 Tel: 800.547.2537 Fax: 520.295.4197 C&D Technologies, EMEA/AP Milton Keynes MK14 5BU UK Tel: +44 (0)1908 615232 Fax: +44 (0)1908 617545 Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace applications. Product: www.cdpoweronline.com HPR1XX REV M 4/03 4