EL1507 ® Data Sheet February 9, 2005 FN7013.1 Medium Power Differential Line Driver Features The EL1507 is a very low power dual operational amplifier designed for central office and customer premise line driving for DMT ADSL solutions. This device features a high drive capability of 400mA while consuming only 7.5mA of supply current per amplifier from ±12V supplies. This driver achieves a typical distortion of less than -75dBc, at 1MHz into a 50Ω load. The EL1507 is available in the thermallyenhanced 16-pin SO package, as well as a 16-pin QFN package. Both are specified for operation over the full -40°C to +85°C temperature range. • Drives 360mA at 16VP-P on ±12V supplies The EL1507 has two control pins, C0 and C1. With the selection of C0 and C1, the device can be set into full-IS power, ¾-IS power, ½-IS power, and power down disable modes. The EL1507 maintains excellent distortion and load driving capabilities even in the lowest power settings. • 40VP-P differential output drive into 100Ω • -75dBc typical driver output distortion driving 50Ω at 1MHz and ½-IS bias current • Low quiescent current of 3.5mA per amplifier in ½-IS mode • Power down disable mode • Pb-Free available (RoHS compliant) Applications • ADSL G.DMT and G.lite CO line driving • G.SHDSL, HDSL2 line driver • ADSL CPE line driving • Video distribution amplifier • Video twisted-pair line driver Ordering Information Get FULL DATASHEET PART NUMBER PACKAGE TAPE & REEL PKG. DWG. # EL1507CS 16-Pin SO - MDP0027 EL1507CS-T7 16-Pin SO 7” MDP0027 EL1507CS-T13 16-Pin SO 13” MDP0027 EL1507CSZ ( See Note) 16-Pin SO (Pb-free) - MDP0027 EL1507CSZ-T7 (See Note) 16-Pin SO (Pb-free) 7” MDP0027 EL1507CSZ-T13 (See Note) 16-Pin SO (Pb-free) 13” MDP0027 EL1507CL 16-Pin QFN - MDP0046 EL1507CL-T7 16-Pin QFN 7” MDP0046 EL1507CL-T13 16-Pin QFN 13” MDP0046 NOTE: Intersil Pb-free products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2001, 2005. All Rights Reserved All other trademarks mentioned are the property of their respective owners. EL1507 All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2 FN7013.1 February 9, 2005