Aluminum Electrolytic Capacitors/ M Radial Lead Type Series: M Type: A ■ Features ● Endurance : 85 °C 2000 h ● Smaller than series SU ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range –40 °C to + 85 °C –25 °C to +85 °C 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC 2.2 μF to 22000 μF 1 μF to 470 μF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) DC Leakage Current tan d I < 0.06 CV +10 (μA) After 2 minutes Please see the attached standard products list After applying rated working voltage for 2000 hours at +85°C±2 °C, when the capacitors are restored to 20 °C, capacitors shall meet the following limits. Endurance Capacitance change ±20 % of initial measured value tan d <150 % of initial specified value DC leakage current <initial specified value After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life ■ Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 ■ Dimensions in mm (not to scale) (Unit : mm) Sleeve 04 to 08 0d±0.05 Pressure relief 06.3 010 + L= 14 min. 0D+0.5 3 min. F±0.5 – 0D+0.5 = L16 : L±1.0 L20 : L±2.0 Body Dia. 0D 5 6.3 8 10 Lead Dia. 0d 0.5 Lead space F 2.0 12.5 16 18 0.5 0.6 2.5 3.5 0.6 0.6 0.8 0.8 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-111 – Oct. 2013 Aluminum Electrolytic Capacitors/ M ■ Standard Products Endurance : 85 °C 2000 h Case size W.V. (V) 6.3 Cap. (±20 %) (μF) Straight (mm) (mm) Taping Taping ✽B ✽i (mm) Part No. (mm) Straight Taping Leads (pcs) (pcs) 5 11 240 0.28 0.5 2.0 5.0 2.5 ECA0JM221( ) 200 2000 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( ) 200 2000 1000 8 11.5 580 0.28 0.6 3.5 5.0 ECA0JM102( ) 200 1000 2200 10 16 890 0.30 0.6 5.0 5.0 ECA0JM222( ) 200 500 3300 10 20 1020 0.32 0.6 5.0 5.0 ECA0JM332( ) 200 500 4700 12.5 20 1170 0.34 0.6 5.0 5.0 ECA0JM472( ) 200 500 6800 12.5 25 1270 0.38 0.6 5.0 5.0 ECA0JM682( ) 200 500 10000 16 25 1450 0.46 0.8 7.5 7.5 ECA0JM103( ) 100 250 15000 16 31.5 1700 0.56 0.8 7.5 ECA0JM153 100 18 35.5 1900 0.70 0.8 7.5 330 6.3 11.2 330 0.24 0.5 2.5 5.0 1000 10 12.5 630 0.24 0.6 5.0 5.0 ECA1AM102( ) 200 500 2200 10 20 920 0.26 0.6 5.0 5.0 ECA1AM222( ) 200 500 ECA0JM223 2.5 ECA1AM331( ) 50 200 2000 3300 12.5 20 1090 0.28 0.6 5.0 5.0 ECA1AM332( ) 200 500 4700 12.5 25 1200 0.30 0.6 5.0 5.0 ECA1AM472( ) 200 500 6800 16 25 1400 0.34 0.8 7.5 7.5 ECA1AM682( ) 100 250 10000 16 31.5 1600 0.42 0.8 7.5 ECA1AM103 100 1850 0.52 0.8 7.5 30 0.20 0.5 2.0 5.0 18 35.5 5 11 ECA1AM153 2.5 ECA1CM100( ) 50 200 2000 22 5 11 75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( ) 200 2000 33 5 11 110 0.20 0.5 2.0 5.0 2.5 ECA1CM330( ) 200 2000 47 5 11 130 0.20 0.5 2.0 5.0 2.5 ECA1CM470( ) 200 2000 100 5 11 180 0.20 0.5 2.0 5.0 2.5 ECA1CM101( ) 200 2000 220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 ECA1CM221( ) 200 2000 470 8 11.5 440 0.20 0.6 3.5 5.0 ECA1CM471( ) 200 1000 1000 10 16 680 0.20 0.6 5.0 5.0 ECA1CM102( ) 200 500 2200 12.5 20 1000 0.22 0.6 5.0 5.0 ECA1CM222( ) 200 500 3300 12.5 25 1200 0.24 0.6 5.0 5.0 ECA1CM332( ) 200 500 4700 16 25 1360 0.26 0.8 7.5 7.5 ECA1CM472( ) 100 250 6800 16 31.5 1600 0.30 0.8 7.5 ECA1CM682 100 10000 18 35.5 1800 0.38 0.8 7.5 ECA1CM103 50 100 6.3 11.2 180 0.16 0.5 2.5 5.0 ECA1EM101( ) 200 2000 330 8 11.5 390 0.16 0.6 3.5 5.0 ECA1EM331( ) 200 1000 470 10 12.5 480 0.16 0.6 5.0 5.0 ECA1EM471( ) 200 500 1000 10 20 850 0.16 0.6 5.0 5.0 ECA1EM102( ) 200 500 2.5 2200 12.5 25 1200 0.18 0.6 5.0 5.0 ECA1EM222( ) 200 500 3300 16 25 1300 0.20 0.8 7.5 7.5 ECA1EM332( ) 100 250 4700 16 31.5 1500 0.22 0.8 7.5 ECA1EM472 100 6800 18 35.5 1750 0.26 0.8 7.5 ECA1EM682 50 47 35 Lead Space 6.3 10 25 Lead Dia. Min. Packaging Q'ty 470 15000 16 (mm) Lead Length 220 22000 10 Dia. Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mm) (mA r.m.s.) 5 11 130 0.14 0.5 2.0 5.0 2.5 ECA1VM470( ) 200 2000 100 6.3 11.2 210 0.14 0.5 2.5 5.0 2.5 ECA1VM101( ) 200 2000 220 8 11.5 350 0.14 0.6 3.5 5.0 ECA1VM221( ) 200 1000 · When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-112 – Oct. 2013 Aluminum Electrolytic Capacitors/ M ■ Standard Products Endurance : 85 °C 2000 h Case size W.V. (V) 35 50 Cap. (±20 %) Lead Dia. Lead Space Straight (mm) Min. Packaging Q'ty (mm) Taping Taping ✽B ✽i (mm) Part No. (mm) Straight Taping Leads (pcs) (pcs) (mm) 330 10 12.5 440 0.14 0.6 5.0 5.0 ECA1VM331( ) 200 500 470 10 16 550 0.14 0.6 5.0 5.0 ECA1VM471( ) 200 500 1000 12.5 20 900 0.14 0.6 5.0 5.0 ECA1VM102( ) 200 500 2200 16 25 1250 0.16 0.8 7.5 7.5 ECA1VM222( ) 100 250 3300 16 31.5 1400 0.18 0.8 7.5 ECA1VM332 100 4700 18 35.5 1600 0.20 0.8 7.5 0.1 5 11 1.3 0.12 0.5 2.0 5.0 2.5 0.22 5 11 2.9 0.12 0.5 2.0 5.0 0.33 5 11 4.4 0.12 0.5 2.0 5.0 ECA1VM472 50 ECA1HM0R1( )✽✽✽ 200 2000 2.5 ECA1HMR22( )✽✽✽ 200 2000 2.5 ECA1HMR33( )✽✽✽ 200 2000 0.47 5 11 5 0.12 0.5 2.0 5.0 2.5 ECA1HMR47( )✽✽✽ 200 2000 1 5 11 10 0.12 0.5 2.0 5.0 2.5 ECA1HM010( )✽✽✽ 200 2000 2.2 5 11 20 0.12 0.5 2.0 5.0 2.5 ECA1HM2R2( ) 200 2000 3.3 5 11 35 0.12 0.5 2.0 5.0 2.5 ECA1HM3R3( ) 200 2000 4.7 5 11 45 0.12 0.5 2.0 5.0 2.5 ECA1HM4R7( ) 200 2000 10 5 11 65 0.12 0.5 2.0 5.0 2.5 ECA1HM100( ) 200 2000 22 5 11 100 0.12 0.5 2.0 5.0 2.5 ECA1HM220( ) 200 2000 33 5 11 110 0.12 0.5 2.0 5.0 2.5 ECA1HM330( ) 200 2000 47 6.3 11.2 130 0.12 0.5 2.5 5.0 2.5 ECA1HM470( ) 200 2000 8 11.5 250 0.12 0.6 3.5 5.0 ECA1HM101( ) 200 1000 220 10 12.5 400 0.12 0.6 5.0 5.0 ECA1HM221( ) 200 500 330 10 16 500 0.12 0.6 5.0 5.0 ECA1HM331( ) 200 500 470 10 20 650 0.12 0.6 5.0 5.0 ECA1HM471( ) 200 500 12.5 25 1050 0.12 0.6 5.0 5.0 ECA1HM102( ) 200 500 1000 100 Lead Length (μF) 100 63 Dia. Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mm) (mA r.m.s.) 2200 16 31.5 1300 0.14 0.8 7.5 ECA1HM222 100 3300 18 35.5 1500 0.16 0.8 7.5 ECA1HM332 50 10 5 11 70 0.11 0.5 2.0 5.0 2.5 ECA1JM100( ) 200 2000 22 5 11 105 0.11 0.5 2.0 5.0 2.5 ECA1JM220( ) 200 2000 33 6.3 11.2 130 0.11 0.5 2.5 5.0 2.5 ECA1JM330( ) 200 2000 47 6.3 11.2 160 0.11 0.5 2.5 5.0 2.5 ECA1JM470( ) 200 2000 100 8 11.5 270 0.11 0.6 3.5 5.0 ECA1JM101( ) 200 1000 220 10 16 450 0.11 0.6 5.0 5.0 ECA1JM221( ) 200 500 330 10 20 550 0.11 0.6 5.0 5.0 ECA1JM331( ) 200 500 470 12.5 20 750 0.11 0.6 5.0 5.0 ECA1JM471( ) 200 500 7.5 ECA1JM102( ) 100 250 1000 16 25 1100 0.11 0.8 7.5 2200 18 35.5 1400 0.13 0.8 7.5 0.47 5 11 10 0.10 0.5 2.0 5.0 2.5 ECA2AMR47( )✽✽✽ 200 2000 1 5 11 20 0.10 0.5 2.0 5.0 2.5 ECA2AM010( )✽✽✽ 200 2000 ECA1JM222 50 2.2 5 11 30 0.10 0.5 2.0 5.0 2.5 ECA2AM2R2( ) 200 2000 3.3 5 11 40 0.10 0.5 2.0 5.0 2.5 ECA2AM3R3( ) 200 2000 4.7 5 11 50 0.10 0.5 2.0 5.0 2.5 ECA2AM4R7( ) 200 2000 10 5 11 70 0.10 0.5 2.0 5.0 2.5 ECA2AM100( ) 200 2000 22 6.3 11.2 115 0.10 0.5 2.5 5.0 2.5 ECA2AM220( ) 200 2000 · When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping Dimensions”. ✽✽✽ Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-113 – Oct. 2013 Aluminum Electrolytic Capacitors/ M ■ Standard Products Endurance : 85 °C 2000 h Case size W.V. (V) 100 160 200 250 Cap. (±20 %) (μF) (mm) Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping ✽B ✽i (mm) (mm) (mm) Part No. (mm) Straight Taping Leads (pcs) (pcs) 33 8 11.5 145 0.10 0.6 3.5 5.0 ECA2AM330( ) 200 1000 47 8 11.5 180 0.10 0.6 3.5 5.0 ECA2AM470( ) 200 1000 100 10 16 350 0.10 0.6 5.0 5.0 ECA2AM101( ) 200 500 220 12.5 20 550 0.10 0.6 5.0 5.0 ECA2AM221( ) 200 500 330 12.5 25 700 0.10 0.6 5.0 5.0 ECA2AM331( ) 200 500 7.5 ECA2AM471( ) 100 250 470 16 25 900 0.10 0.8 7.5 1000 18 35.5 1300 0.10 0.8 7.5 ECA2AM102 50 1 6.3 11.2 36 0.16 0.5 2.5 5.0 2.5 ECA2CM010( ) 200 2000 2.2 6.3 11.2 53 0.16 0.5 2.5 5.0 2.5 ECA2CM2R2( ) 200 2000 3.3 6.3 11.2 66 0.16 0.5 2.5 5.0 2.5 ECA2CM3R3( ) 200 2000 4.7 6.3 11.2 78 0.16 0.5 2.5 5.0 2.5 ECA2CM4R7( ) 200 2000 10 10 12.5 105 0.16 0.6 5.0 5.0 ECA2CM100( ) 200 500 22 10 16 175 0.16 0.6 5.0 5.0 ECA2CM220( ) 200 500 33 10 20 235 0.16 0.6 5.0 5.0 ECA2CM330( ) 200 500 47 12.5 20 320 0.16 0.6 5.0 5.0 ECA2CM470( ) 200 500 5.0 500 100 12.5 25 515 0.16 0.6 5.0 ECA2CM101( ) 200 220 16 31.5 830 0.16 0.8 7.5 ECA2CM221 100 330 18 31.5 1090 0.16 0.8 7.5 ECA2CM331 50 470 18 40 1440 0.16 0.8 7.5 ECA2CM471 50 1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2DM010( ) 200 2000 2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2DM2R2( ) 200 2000 3.3 6.3 11.2 62 0.18 0.5 2.5 5.0 2.5 ECA2DM3R3( ) 200 2000 4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2DM4R7( ) 200 1000 10 10 12.5 100 0.18 0.6 5.0 5.0 ECA2DM100( ) 200 500 22 10 20 180 0.18 0.6 5.0 5.0 ECA2DM220( ) 200 500 33 10 20 220 0.18 0.6 5.0 5.0 ECA2DM330( ) 200 500 47 12.5 20 300 0.18 0.6 5.0 5.0 ECA2DM470( ) 200 500 100 16 25 475 0.18 0.8 7.5 7.5 ECA2DM101( ) 100 250 220 18 31.5 835 0.18 0.8 7.5 ECA2DM221 330 18 40 1140 0.18 0.8 7.5 1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2DM331 2.5 2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 3.3 8 11.5 72 0.18 0.6 3.5 5.0 4.7 8 11.5 10 10 16 ECA2EM010( ) 50 50 200 2000 ECA2EM2R2( ) 200 2000 ECA2EM3R3( ) 200 1000 86 0.18 0.6 3.5 5.0 ECA2EM4R7( ) 200 1000 110 0.18 0.6 5.0 5.0 ECA2EM100( ) 200 500 22 10 20 180 0.18 0.6 5.0 5.0 ECA2EM220( ) 200 500 33 12.5 20 250 0.18 0.6 5.0 5.0 ECA2EM330( ) 200 500 47 12.5 25 330 0.18 0.6 5.0 5.0 ECA2EM470( ) 200 500 16 31.5 530 0.18 0.8 7.5 ECA2EM101 100 100 350 Dia. Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mm) (mA r.m.s.) 220 18 40 930 0.18 0.8 7.5 1 6.3 11.2 32 0.20 0.5 2.5 5.0 8 11.5 55 0.20 0.6 3.5 5.0 2.2 ECA2EM221 2.5 50 ECA2VM010( ) 200 2000 ECA2VM2R2( ) 200 1000 · When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-114 – Oct. 2013 Aluminum Electrolytic Capacitors/ M ■ Standard Products Endurance : 85 °C 2000 h Case size W.V. (V) 350 400 450 Cap. (±20 %) (μF) Dia. (mm) Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mm) (mA r.m.s.) Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping ✽B ✽i (mm) (mm) (mm) Part No. (mm) Straight Taping Leads (pcs) (pcs) 3.3 8 11.5 60 0.20 0.6 3.5 5.0 ECA2VM3R3( ) 200 1000 4.7 10 12.5 65 0.20 0.6 5.0 5.0 ECA2VM4R7( ) 200 500 10 10 20 115 0.20 0.6 5.0 5.0 ECA2VM100( ) 200 500 22 12.5 20 195 0.20 0.6 5.0 5.0 ECA2VM220( ) 200 500 33 16 25 300 0.20 0.8 7.5 7.5 ECA2VM330( ) 100 250 7.5 ECA2VM470( ) 100 250 47 16 25 325 0.20 0.8 7.5 100 18 31.5 535 0.20 0.8 7.5 1 ECA2VM101 2.5 50 6.3 11.2 32 0.20 0.5 2.5 5.0 2.2 8 11.5 50 0.20 0.6 3.5 5.0 ECA2GM010( ) 200 2000 ECA2GM2R2( ) 200 1000 3.3 10 12.5 54 0.20 0.6 5.0 5.0 ECA2GM3R3( ) 200 500 4.7 10 16 72 0.20 0.6 5.0 5.0 ECA2GM4R7( ) 200 500 10 10 20 115 0.20 0.6 5.0 5.0 ECA2GM100( ) 200 500 22 12.5 25 215 0.20 0.6 5.0 5.0 ECA2GM220( ) 200 500 33 16 25 275 0.20 0.8 7.5 7.5 ECA2GM330( ) 100 250 47 16 31.5 350 0.20 0.8 7.5 ECA2GM470 100 100 18 40 600 0.20 0.8 7.5 1 8 11.5 37 0.20 0.6 3.5 ECA2GM101 5.0 ECA2WM010( ) 50 200 1000 2.2 10 12.5 44 0.20 0.6 5.0 5.0 ECA2WM2R2( ) 200 500 3.3 10 16 60 0.20 0.6 5.0 5.0 ECA2WM3R3( ) 200 500 4.7 10 20 79 0.20 0.6 5.0 5.0 ECA2WM4R7( ) 200 500 10 12.5 20 130 0.20 0.6 5.0 5.0 ECA2WM100( ) 200 500 7.5 ECA2WM220( ) 100 250 ECA2WM330 100 22 16 25 210 0.20 0.8 7.5 33 16 31.5 285 0.20 0.8 7.5 · When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 – EEE-115 – Oct. 2013