LED Middle POWER 3030AZLxx Series LED Middle POWER 3030 Product Data Sheet AZLxx Series Created Date : 07/ 07 / 2014 Revision: 1.0 1 BNC-OD-C131/A4 Created Date : 05/26/2007 Revison : 1.01, 05/26/2008 LED Middle POWER 3030AZLxx Series 1. Description The LiteON 3030 Product series is a wide beam angle standard-dimension package, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies. 1.1 Features Package in 8mm tape on 7" diameter reels. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. EIA STD package. I.C. compatible. Meet green product and Pb-free(According to RoHS) 1.2 Available Part Numbers CCT Part Number 2700K LTW-3030AZL27 3000K LTW-3030AZL30 3500K LTW-3030AZL35 4000K LTW-3030AZL40 5000K LTW-3030AZL50 5700K LTW-3030AZL57 6500K LTW-3030AZL65 02 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 2. Package Dimensions Part No. Lens Color Source Color LTW-3030AZL65 LTW-3030AZL57 LTW-3030AZL50 LTW-3030AZL40 Orange InGaN Blue LTW-3030AZL35 LTW-3030AZL30 LTW-3030AZL27 Notes: 1. All dimensions are in millimeters. 2. Tolerance is ±0.2 mm (.008") unless otherwise noted. 03 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 3. Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit Code4 Po 1320 mW Continuous Forward Current IF 200 mA Pulse Forward Current IFP 200 mA Operating Temperature Range Pulse Forward Current Storage Temperature Range Topr -40 ~ +100 °C Tstg -40 ~ +100 °C Tj ≦125 °C Power Dissipation Junction Temperature Notes : 1. 1/10 duty cycle, Pulse width ≤10μs. 2. Forbid to operating at reverse voltage condition for long. 3. It is recommended to follow de-rating curve to use maximum rating to ensure LED can operated normally. 04 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 4. Electro-Optical Characteristics 4.1 Typical Performance Test Parameter Symbol Values Unit Condition Correlated Color CCT Typ. 2700 3000 3500 4000 5000 5700 6500 x Typ. 0.458 0.434 0.382 0.382 0.345 0.329 0.312 y Typ. 0.410 0.403 0.380 0.380 0.355 0.342 0.328 Min 100 100 100 100 100 100 100 Typ. 110 115 118 118 120 120 118 Max. 128 132 132 132 132 132 132 116 122 125 125 127 127 125 ‘K Temperature Chromaticity Coordinates Luminous Flux 1 - Φv Optical Efficiency ηopt Typ. Color Rendering Index CRI Min. Viewing Angle 2θ1/2 Forward Voltage Thermal Resistance ESD-Withstand Voltage lm lm/W IF = 80 - 150mA Typ. 120 deg Min 5.8 Typ. 6.3 Max. 6.6 Rjs Typ. 8 °C/W ESD Min 5K HBM VF V V Notes 1. Luminous flux is the total luminous flux output as measured with an integrating sphere. 2. Iv (flux v) classification code is marked on each packing bag. 3. The chromaticity coordinates (x, y) is derived from the 1931 CIE chromaticity diagram. 4. Caution in ESD: Static Electricity and surge damages the LED. It is recommended using a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded. 5. CAS140B is the test standard for the chromaticity coordinates (x, y) & v. 6. The chromaticity coordinates (x, y) guarantee should be added +/- 0.01 tolerance 7. CRI measurement allowance is ±5, R9>0 05 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 4.2 Forward Current vs. Lumen and Voltage Lumen (lm) Current VF (mA) (V) 2700K 3000K 3500K 4000K 5000K 5700K 6500K 20 5.49 18.3 19.2 19.7 19.7 20.0 20.0 19.7 40 5.65 35.4 37.0 38.0 38.0 38.6 38.6 38.0 60 5.77 50.6 53.0 54.3 54.3 55.3 55.3 54.3 80 5.90 66.2 69.2 71.0 71.0 72.2 72.2 71.0 100 6.01 80.3 83.9 86.1 86.1 87.6 87.6 86.1 120 6.11 93.5 97.7 100.2 100.2 101.9 101.9 100.2 140 6.22 104.9 109.6 112.5 112.5 114.4 114.4 112.5 150 6.28 110.0 115.0 118.0 118.0 120.0 120.0 118.0 160 6.34 115.2 120.4 123.5 123.5 125.6 125.6 123.5 180 6.42 125.8 131.5 134.9 134.9 137.2 137.2 134.9 200 6.52 134.1 140.2 143.8 143.8 146.3 146.3 143.8 06 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 4.3 Relative Spectral Power Distribution at Typical Current 3000K 5000K 25degC 25degC 85degC 85degC 4.4 Radiation Characteristics 0° 100% 90% 30° Relative Intensity (%) 80% 70% 60% 60° 50% 40% 30% 20% 10% 0% 90° 60 30° 0° 50 100 07 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 4.5 Forward Voltage vs. Forward Current 4.6 Color Shift vs. Forward Current Cool White Warm White 08 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 4.7 Forward Current Derating Curve vs. Ambient Temperature 4.8 Relative Intensity vs. Junction Temperature 09 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 4.9 Voltage vs. Junction Temperature 4.10 Color Shift vs. Junction Temperature 010 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 5. Binning Definition 5.1 Color Bin 6500K 5700K 011 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 5000K 4000K 012 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 3500K 3000K 013 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 2700K 014 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series Color Rank 6500K Rank - x y 1 0.3048 2 - x y 0.3209 1 0.3145 0.3028 0.3304 2 3 0.3117 0.3393 3 K1 Rank (IF = 150 mA) - x y 0.3187 1 0.3098 0.320 0.3138 0.3238 2 0.3081 0.3299 0.3177 0.3277 3 0.3124 0.3342 4 0.3138 0.3239 K3 Rank K5 4 0.3124 0.3341 4 0.3172 0.3330 5 0.3081 0.3299 5 0.3213 0.3371 6 0.3089 0.3249 6 0.3221 0.3261 1 0.3068 0.3113 1 0.3117 0.3393 1 0.3138 0.3239 2 0.3048 0.3209 2 0.3205 0.3481 2 0.3124 0.3342 3 0.3089 0.3249 3 0.3213 0.3371 3 0.3167 0.3384 4 0.3178 0.3277 - x y K2 K4 K6 4 0.3098 0.32 4 0.3172 0.333 5 0.3138 0.3238 5 0.3166 0.3384 6 0.3145 0.3187 6 0.3124 0.3341 Tolerance on each Hue bin (x,y) is +/- 0.01. 5700K Rank - x y 1 0.3215 2 - x y 0.3353 1 0.3294 0.3306 1 0.3256 0.3331 0.3207 0.3462 2 0.3293 0.3364 2 0.3251 0.3444 3 0.3292 0.3539 3 0.3331 0.3398 3 0.3292 0.3481 4 0.3293 0.3364 J1 Rank (IF = 150 mA) J3 Rank J5 4 0.3292 0.3481 4 0.3332 0.3458 5 0.3251 0.3444 5 0.3371 0.3493 6 0.3254 0.3388 6 0.3366 0.3369 1 0.3222 0.3243 1 0.3292 0.3539 1 0.3293 0.3364 2 0.3215 0.3353 2 0.3376 0.3616 2 0.3293 0.3481 3 0.3254 0.3388 3 0.3371 0.3493 3 0.3333 0.3518 4 0.3331 0.3398 J2 J4 J6 4 0.3256 0.3331 4 0.3332 0.3458 5 0.3293 0.3364 5 0.3333 0.3518 6 0.3294 0.3306 6 0.3292 0.3481 Tolerance on each Hue bin (x,y) is +/- 0.01. 015 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 5000K Rank - x y 1 0.3371 2 - x y 0.3493 1 0.3441 0.3376 0.3616 2 3 0.3464 0.3688 3 H1 Rank (IF = 150 mA) - x y 0.3428 1 0.3407 0.3462 0.3446 0.3493 2 0.3416 0.3589 0.3485 0.3524 3 0.3458 0.3623 4 0.3446 0.3493 H3 Rank H5 4 0.3458 0.3623 4 0.3493 0.3591 5 0.3416 0.3589 5 0.3533 0.3624 6 0.3412 0.3525 6 0.3515 0.3487 1 0.3366 0.3369 1 0.3464 0.3688 1 0.3446 0.3493 2 0.3371 0.3493 2 0.3551 0.3760 2 0.3458 0.3623 3 0.3412 0.3525 3 0.3533 0.3624 3 0.3500 0.3657 4 0.3485 0.3524 - x y H2 H4 H6 4 0.3407 0.3462 4 0.3493 0.3591 5 0.3446 0.3493 5 0.3500 0.3657 6 0.3441 0.3428 6 0.3458 0.3623 Tolerance on each Hue bin (x,y) is +/- 0.01. 4000K Rank - x y 1 0.3703 2 - x y 0.3726 1 0.3784 0.3647 1 0.3746 0.3689 0.3736 0.3874 2 0.3806 0.3725 2 0.3784 0.3841 3 0.3871 0.3959 3 0.3865 0.3762 3 0.3849 0.3882 4 0.3806 0.3726 G1 Rank (IF = 150 mA) G3 Rank G5 4 0.3849 0.3881 4 0.3890 0.3842 5 0.3784 0.3841 5 0.3952 0.3880 6 0.3766 0.3765 6 0.3898 0.3716 1 0.3670 0.3578 1 0.3871 0.3959 1 0.3806 0.3726 2 0.3703 0.3726 2 0.4006 0.4044 2 0.3849 0.3882 3 0.3766 0.3765 3 0.3952 0.3880 3 0.3914 0.3922 4 0.3865 0.3762 G2 G4 G6 4 0.3746 0.3689 4 0.3890 0.3842 5 0.3806 0.3725 5 0.3914 0.3922 6 0.3784 0.3647 6 0.3849 0.3881 Tolerance on each Hue bin (x,y) is +/- 0.01. 016 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 3500K Rank - x y 1 0.3943 2 - x y 0.3853 1 0.4018 0.3996 0.4015 2 3 0.4148 0.4090 3 F1 Rank (IF = 150 mA) - x y 0.3752 1 0.3983 0.3804 0.4050 0.3837 2 0.4042 0.3970 0.4118 0.3869 3 0.4115 0.4006 4 0.4050 0.3837 F3 Rank F5 4 0.4115 0.4006 4 0.4153 0.3955 5 0.4042 0.3970 5 0.4223 0.3990 6 0.4013 0.3887 6 0.4147 0.3814 1 0.3889 0.3690 1 0.4148 0.4090 1 0.4050 0.3837 2 0.3943 0.3853 2 0.4299 0.4165 2 0.4115 0.4006 3 0.4013 0.3887 3 0.4223 0.3990 3 0.4188 0.4041 4 0.4118 0.3869 - x y F2 F4 F6 4 0.3983 0.3804 4 0.4153 0.3955 5 0.4050 0.3837 5 0.4188 0.4041 6 0.4018 0.3752 6 0.4115 0.4006 Tolerance on each Hue bin (x,y) is +/- 0.01. 3000K Rank - x y 1 0.4223 2 - x y 0.3990 1 0.4260 0.3854 1 0.4244 0.3923 0.4299 0.4165 2 0.4303 0.3943 2 0.4324 0.4100 3 0.4431 0.4213 3 0.4361 0.3964 3 0.4388 0.4123 4 0.4303 0.3944 E1 Rank (IF = 150 mA) E3 Rank E5 4 0.4388 0.4123 4 0.4406 0.4055 5 0.4324 0.4100 5 0.4468 0.4077 6 0.4284 0.4011 6 0.4373 0.3893 1 0.4147 0.3814 1 0.4431 0.4213 1 0.4303 0.3944 2 0.4223 0.3990 2 0.4562 0.4260 2 0.4388 0.4123 3 0.4284 0.4011 3 0.4468 0.4077 3 0.4452 0.4146 4 0.4361 0.3964 E2 E4 E6 4 0.4244 0.3923 4 0.4406 0.4055 5 0.4303 0.3943 5 0.4451 0.4146 6 0.4260 0.3854 6 0.4388 0.4123 9 Tolerance on each Hue bin (x,y) is +/- 0.01. 017 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 2700K Rank - x y 1 0.4468 2 - x y 0.4077 1 0.4483 0.4562 0.4260 2 3 0.4688 0.4290 3 D1 Rank (IF = 150 mA) - x y 0.3919 1 0.4477 0.3998 0.4534 0.4011 2 0.4576 0.4183 0.4591 0.4025 3 0.4637 0.4197 4 0.4534 0.4012 D3 Rank D5 4 0.4636 0.4197 4 0.4644 0.4118 5 0.4576 0.4183 5 0.4703 0.4132 6 0.4527 0.4090 6 0.4593 0.3944 1 0.4373 0.3893 1 0.4688 0.4290 1 0.4534 0.4012 2 0.4468 0.4077 2 0.4813 0.4319 2 0.4637 0.4197 3 0.4527 0.4090 3 0.4703 0.4132 3 0.4697 0.4211 4 0.4591 0.4025 D2 D4 D6 4 0.4477 0.3998 4 0.4644 0.4118 5 0.4534 0.4011 5 0.4697 0.4211 6 0.4483 0.3919 6 0.4636 0.4197 Tolerance on each Hue bin (x,y) is +/- 0.01. 018 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 5.2 Flux Bin 2700K v Bin v Luminous Flux Spec. Table Lumen (lm) at IF = 150 mA Min Max EF 100 104 FI 104 IL 116 3000K v Bin EG 100 108 116 GJ 108 120 128 JM 120 132 v Luminous Flux Spec. Table Lumen (lm) at IF = 150 mA EG 100 108 GJ 108 JM 120 v Bin v Luminous Flux Spec. Table Lumen (lm) at IF = 150 mA Max EG 100 108 120 GJ 108 120 132 JM 120 132 Lumen (lm) at IF = 150 mA Min Max EG 100 108 GJ 108 JM 120 5000K Min v Luminous Flux Spec. Table Lumen (lm) at IF = 150 mA Max Max v Bin v Bin v Luminous Flux Spec. Table Min Min 3500K 4000K 5700K v Bin v Luminous Flux Spec. Table Lumen (lm) at IF = 150 mA Min Max EG 100 108 120 GJ 108 120 132 JM 120 132 6500K v Bin v Luminous Flux Spec. Table Lumen (lm) at IF = 150 mA Min Max EG 100 108 GJ 108 120 JM 120 132 Tolerance on each Luminous Flux bin is +/- 10%. 019 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 5.3 Voltage Bin VF Spec. Table Forward Voltage (volts) at IF = 150mA VF Bin Min Max V1 5.8 6.0 V2 6.0 6.2 V3 6.2 6.4 V4 6.4 6.6 Tolerance on each Forward Voltage bin is +/- 0.1V 6. Bin Code List ※ Notes: Full Rank on Label Example: V1 / FI/ D5 Forward Voltage Rank Luminous Flux Rank Color Rank V1 FI D5 020 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 7. Reflow Soldering Characteristics Profile Feature Lead Free Assembly Average Ramp-Up Rate (TSmax to TP) 3°C / second max Preheat Temperature Min (TSmin) 150°C Preheat Temperature Max (TSmax) 200°C Preheat Time (tSmin to tSmax) 60 – 180 seconds Time Maintained Above Temperature (TL) 217°C Time Maintained Above Time (tL) 60 – 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 5 seconds Ramp – Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Notes: 1. The LEDs can be soldered using the reflow soldering or hand soldering method. The recommended hand soldering condition is 350 °C max. and 2 secs max. for one time only, and the recommended reflow soldering condition is 260 °C max. and 5 secs max. for three times max. 2. All temperatures refer to topside of the package, measured on the package body surface. 021 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 3. The soldering condition referring to J-STD-020B. The storage ambient for the LEDs should not exceed 30 °C temperature or 70% relative humidity. It is recommended that LEDs out of their original packaging are soldered within one week. For extended storage out of their original packaging, it is recommended that the LEDs were stored in a sealed container with appropriate desiccant, or desiccators with nitrogen ambient. If the LEDs were unpacked more than 168hrs, baking the LEDs at 60 ℃ for 24hrs before soldering process. 4. The soldering profile could be further referred to different soldering grease material characteristic. The grease vendor will provide this information. 5. A rapid-rate process is not recommended for the LEDs cooling down from the peak temperature. 6. Although the recommended reflow conditions are specified above, the reflow or hand soldering condition at the lowest possible temperature is desirable for the LEDs. 7. LiteOn cannot make a guarantee on the LEDs which have been already assembled using the dip soldering method. 022 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 8. Reliability Test Number of No Test item Test Condition Duration Damaged Steady State Operating Life of 1 Ta=85℃, IF=150mA 1000 hrs 0/20 Ta=-40℃, IF=150mA 1000 hrs 0/20 500 hrs 0/20 High Temperature (HTOL) Steady State Operating Life of 2 Low Temperature (LTOL) Pulse Wet Operating Life of 60℃/90%RH, IF=150mA High Temperature (PWHTOL) 30mins ON/30min OFF 4 High Temperature Storage (HTS) 100℃ 1000 hrs 0/20 5 Low Temperature Storage (LTS) -40℃ 1000 hrs 0/20 6 Thermal Cycle (TC) 200 cycles 0/20 200 cycles 0/20 3 -40℃~100℃ 30min dwell 5min transfer -40℃~100℃ 7 Thermal Shock (TS) 20min dwell 20sec transfer 8 Solder Resistance (SR) 265℃, 3X MSL 5sec 0/20 9 Solder Ability (SA) 245℃5sec, 95% coverage 5sec 0/11 10 Mechanical Shock (MS) 1500G 0.5msec pulse shock each 6 0/6 axis 11 Random Vibration (RV) 6G RMS, 10-2000Hz, 10min Variable Vibration Frequency 10-2000-10Hz, log or linear sweep rate, 20G (VVF) for 1 min, 1.5mm each apply 3x per axis Salt Spread (SS) 35℃, 30g/m2/day 12 13 per axis 0/6 over 6hrs 0/6 48hrs 0/11 Criteria for Judging the Damage Criteria for Judgment Item Symbol Test Condition Min. Forward Voltage VF IF=Typical Current Luminous Flux lm IF=Typical Current CCX&CCY x,y IF=Typical Current Max. U.S.L. x 1.1 L.S.L. x 0.7 Shift<0.02 023 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 9. User Guide Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less than one minute. Recommend Printed Circuit Board Attachment Pad Infrared / vapor phase Reflow Soldering Package Dimensions of Tape 024 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series Note: All dimensions are in millimeters (inches). Package Dimensions of Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-1000 pieces per reel. 3. Minimum packing quantity is 500 pieces for remainders. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with EIA-481-1-B specifications. 025 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 10. Cautions 10.1 Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).Consult Liteon’s Sales in advance for information on applications in which exceptional reliability is required, particularly when the failure or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation, traffic control equipment, medical and life support systems and safety devices). 10.2 Storage This product is qualified as Moisture sensitive Level 3 per JEDEC J-STD-020 Precaution when handing this moisture sensitive product is important to ensure the reliability of the product. The package is sealed: The LEDs should be stored at 30°C or less and 90%RH or less. And the LEDs are limited to use within one year, while the LEDs is packed in moisture-proof package with the desiccants inside. The package is opened: The LEDs should be stored at 30°C or less and 60%RH or less. Moreover, the LEDs are limited to solder process within 168hrs. If exceeding the storage limiting time since opened, that we recommended to baking LEDs at 60°C at least 24hrs. To seal the remainder LEDs return to package, it’s recommended to be with workable desiccants in original package. 10.3 Cleaning Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary. 10.4 Drive Mode An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below (A) Recommended circuit. Circuit model A Circuit model B 026 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series (B) The brightness of each LED might appear different due to the differences in the I-V characteristics of those LEDs. 10.5 ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded. Use ion blower to neutralize the static charge which might have built up on surface of the LED’s plastic lens as a result of friction between LEDs during storage and handling. ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “no lightup” at low currents.To verify for ESD damage, check for “light up” and Vf of the suspect LEDs at low currents.The Vf of “good” LEDs should be >2.0V per die @0.1mA for InGaN product and >1.4V per die @0.1mA for AlInGaP product. 10.6 Suggested Checking List: Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-areas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4. Each work surface mats grounding is good? Personnel Grounding 1. Every person (including visitors) handling ESD sensitive (ESDS) items wear wrist strap, heel strap or conductive shoes with conductive flooring? 2. If conductive footwear used, conductive flooring also present where operator stand or walk? 3. Garments, hairs or anything closer than 1 ft to ESD items measure less than 100V*? 027 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0 LED Middle POWER 3030AZLxx Series 4. Every wrist strap or heel strap/conductive shoes checked daily and result recorded for all DLs? 5. All wrist strap or heel strap checkers calibration up to date? Note: *50V for Blue LED. Device Handling 1. Every ESDS items identified by EIA-471 labels on item or packaging? 2. All ESDS items completely inside properly closed static-shielding containers when not at static-safe workstation? 3. No static charge generators (e.g. plastics) inside shielding containers with ESDS items? 4. All flexible conductive and dissipative package materials inspected before reuse or recycle? Others 1. Audit result reported to entity ESD control coordinator? 2. Corrective action from previous audits completed? 3. Are audit records complete and on file? 10.7 Others: Do not put any pressure on the light emitting surface either by finger or any hand tool and do not stack the products. Stress or pressure may cause damage to the wires of the LED array. This product is not designed for the use under any of the following conditions, please confirm the performance and reliability are well enough if you use it under any of the following conditions Do not use sulfur-containing materials in commercial products including the materials such as seals and adhesives that may contain sulfur. Do not put this product in a place with a lot of moisture (over 85% relative humidity), dew condensation, briny air, and corrosive gas (Cl, H2S, NH3, SO2, NOX, etc.), exposure to a corrosive environment may affect silver plating. The appearance and specifications of the product may be modified for improvement without prior notice. 028 BNC-OD-C131/A4 Created Date : 07/07/2014 Revison : 1.0