RoHS MLB05 Multilayer Ferrite Beads Dimensions: 0.063±0.006 (1.60±0.15) Inches (mm) 0.031±0.006 (0.8±0.15) 0.031±0.006 (0.8±0.15) 0.012±0.008 (0.3±0.20) 0.024 (0.6) 0.041 (1.04) 0.031 (0.8) Allied Part Number Impedance (Ω) @ 100 MHz +/- 25% DC Resistance (Ω) Max. MLB05-110-RC MLB05-300-RC MLB05-600-RC MLB05-800-RC MLB05-121-RC MLB05-221-RC MLB05-301-RC MLB05-471-RC MLB05-601-RC MLB05-751-RC MLB05-102-RC MLB05-122-RC MLB05-152-RC MLB05-222-RC MLB05-272-RC 11 30 60 80 120 220 300 470 600 750 1000 1200 1500 2200 2700 0.05 0.10 0.10 0.15 0.25 0.30 0.40 0.50 0.50 0.70 0.70 1.00 1.00 1.20 1.30 *Rated Current (mA) 500 400 400 400 400 200 200 200 200 200 200 50 50 50 50 Features • • • • Surface mount EMI suppression components Nickel barrier termination for excellent resistance to solder heat Multi layer technology Flow and reflow soldering Electrical Impedance Range: 11Ω to 2700Ω Tolerance: 25% over entire range Operating Range: -55ºC ~ +125ºC Storage Temp: Under 25ºC at 40~60% Humidity Rated Current: Based on temp rise not to exceed 30ºC *Temperature rise T= 30ºC at rated current. All specifications subject to change without notice. Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260±5ºC for 10sec ±1 sec. Minimum of 75% of Electrode covered with new solder. Impedance within 30% of initial value. Test Equipment (Z): HP4291A RF Impedance/Material Analyzer (RDC): Chen Hwa 502BC Physical Packaging: 4000 per 7 inch reel. Marking: None ∆ 949-356-1780 ALLIED COMPONENTS INTERNATIONAL REVISED 09/25/2014 www.alliedcomponents.com