medical FEATURES: AHP1501 15W Me d i c a l P o wer A dapt ers w i t h I nt erch a n g e a b le In p u t Plu g s RoHS 2 2011/65/EU series Wide Input Range of 80 to 275VAC, 47 to 63 Hz. Interchangeable Input Plugs medical IEC60601-1 3rd Edition, 2 MOPP APPLICATIONS: Class II HPU63B series 63 TheLevel HPU63B Efficiency V series of AC/DC switching mode power supplies 2.36” APPROVALS: IP22 x 1.71” x 1.58” CB IP22 Model Symbol Output Characteristic Output Output Number Vins Watts Voltage Amps Efficiency Condition Total Input NL Power Consumption Regulation AHP1501-01 Po AHP1501-02 Iil AHP1501-03 Iih Irl AHP1501-04 Irh AHP1501-05 AHP1501-06 △Voi AHP1501-07 OLP AHP1501-08 ttr AHP1501-09 thu AHP1501-10 ts AHP1501-11 Tc AHP1501-12 HV 0.2 Watts 0.3 Watts 0.3 Watts 0.3 Watts 0.3 Watts 0.3 Watts 0.3 Watts 0.3 Watts 0.3 Watts 0.3 Watts 0.3 Watts 0.3 Watts Vin Fi 7.2 12 12 13.5 15 Efficiency 15 15 15 15 15 15 15 3.3VDC 5VDC 6VDC 9VDC 12VDC 15VDC 18VDC 24VDC 30VDC 36VDC 48VDC 55VDC 2.18 2.4 2.0 1.5 1.25 1.0 0.83 0.62 0.5 0.41 0.31 0.27 FEATU provide 63 Watts of continuous output power . All supplies are UL94V-1 min compliant. All models meet FCC Part-18 class B and CISPR-11 EN55011 class B emission Limits and are designed to comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN 60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requirements. Cooling All units are 100% burned in and tested. 65% 80% 81% 83% 84% 85% 86% 86% 86% 86% 86% 86% Ripple & Noise Min. 100 RoHS2 2011/65/EU * Wide O * IEC-32 * Single * Over V * Medic * Input t * Energy * Class II * 3 year Typ. Max. Unit APPLIC 240 VAC * Home 80 275 47 63 VAC * Patien Hz * Blood * Portab W * ECG m A A GENER A * Short C * Coolin A * Flamm ±5% 66mV p-p 15 ±5% 50mV p-p 0.6 ±5% 70mV p-p 0.4 APPROVALS: 35 ±5% 90mV p-p 85 ±5% 100mV p-p * Protec ±5% 100mV p-p 1 % * Safety ±5% 100mV p-p (TUV/T-m Electrical ±5% Characteristics: % 110 150 100mV p-p ms 4 Symbol Characteristic ±3% 100mV p-p ms Safety Approval Input Voltage Range 12Safety Approval & Specification i Vins ±3% 100mV p-p s 0.3 2 Input Operate Voltage Range Detail to see Fig.1 (Derate linearly Vin ±3% 100mV p-p Input Frequency Sine wave ±0.04 %/°C Fi ±3% Output Power Range 100mV p-p 4000 See Rating Chart VAC Po CB EN 60601-1 PS E IEC 60601-1 Iil Low Line Input Current B Full Load, Vin=100VAC Class Environmental: Iih High Line Input Current Full Load, Vin=240VAC Irl Low Line Input Inrush Current Full Load, 25°C, Cool start, Vin=1 Symbol High Line Input Inrush Current Irh Condition Load, 25°C, start, Vin=2 Max.Cool Unit Min.Full Typ. EMI Characteristic Efficiency To Ts non-condensing Ho Hs Vsg ESDa ESDc MTBF ELEV WWW.ASTRODYNETDI.COM VBR Vibration △Voi Line Regulation OVP Over Voltage Protection OLP Over Load Protection °C Detail to -10Full Load, Vin=230VAC, 70 Full Load, Vin=100~120VAC or 20 -40 85 °C 95% RH 0 Recovers automatically 95% RH after fau Full Load, Vin=110VAC kV 2 0 ttr Time of Transient Response thu Hold-Up Time ts Start-up time Tc HV Temperature Coefficient All Condition 100k h Secondary, Dielectric Withstanding Voltage (P-S) Primary to 3000 m limit curre EMI EMC Emission 8 Full Load, Vin=100VAC kV 6 Full Load, Vin=100~240VAC kV Compliance to EN55011 ASTRODYNE USA: 51-800-823-8082 G (CISPR1 ASTRODYNE PACIFIC: 886-2-26983458 Environmental: Symbol Characteristic 15W Me d i c a l P o wer A dapt ers w i t h I nt erch a n g e a b le In p u t Plu g s INPUT SPECIFICATIONS Input Voltage Range Frequency Range (Sine Wave) Input Current Inrush Current, typ (Cold Start) Protection Class Input NL Power Consumption 80-275 VAC (100-240V Nominal) See Input Derate curve, Fig. 1 47-63 Hz Low Line (100VAC) 0.6A max. High Line (240VAC) 0.4A max. Low Line (100VAC) 35A max. High Line (240VAC) 85A max. Double Insulated, Class II See Selection Chart See Selection Chart 0 to FL Rating See Selection Chart ± 1%, max. 110-150%, auto recover Auto Recover 110Vin, FL 4mS ±0.04%/°C, typ See Selection Chart 100Vin, FL 2S max. / 12mS min. GENERAL SPECIFICATIONS Input-Out Isolation Efficiency (FL, Nom. Input)) Safety 4000 VAC See Selection Chart ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd Edition) Oper. Temperature Storage Temperature Operating/Storage Humidity Cooling EMC Surge Voltage ESD Air ESD Contact MTBF MIL-HDBK-217F, 25°C Operating Altitude Vibration Flammability Rating -10 to +40°C (FL) * 50% Load @ 70°C See Output Derate Curve, Fig. 2 -40 to +85°C * 0% to 95% RH * Free Air Convection EN55011 (CISPR11), EN61000-3-2,-3 Class B 2kV, All Conditions 8kV, IEC61000-4-2 6kV, IEC61000-4-2 100K h 3000m 5G, 10~500Hz, 10 min./1 cycle, 60 min. each along X, Y, Z axes UL94V-1 NOTES 1. Line Regulation defined as changing the input voltage ±10% from nominal line at rated load. 2. Total Regulation is defined by as changing the load ±40% from 60% rated load. 3. Ripple & Noise is measured by using a 20MHz bandwidth limited oscilloscope and terminating the output with a 0.47uF capacitor at rated load and nominal line. * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. PHYSICAL SPECIFICATIONS Size Construction Weight series ENVIRONMENTAL SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage and Current Output Power Range Total Regulation (Note 2) Line Regulation, FL (Note 1) Over Load Protection* Short Circuit Protection Transient Response Temperature Coefficient Ripple/Noise (Note 3) Start Up / Hold Up Time AHP1501 2.36” x 1.71” x 1.58” (60 x 43.4 x 40.1mm) Wallmount Style 5.82oz (165g) All specifications are typical at nominal input, full load, and 25°C unless otherwise noted WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 50 rated load and nominal line. 6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. Efficiency is measured at rated load, and nominal line. 8. The specifics for testing the energy efficiency of this Series are outlined in a separate document titled "Test Method for Calculating the Energy Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power Supplies (August 11, 2004)," which is available on the ENERGY STAR Website. 80 100 120 140 160 180 200 220 INPUT VOLTAGE (VAC) (FIG.1) INPUT VOLTAGE DERATING CURVE 240 260 280 110 100 90 80 70 60 AHP1501 50 40 15W Me d i c a l P o wer A dapt ers w i t h I nt erch a n g e a b le In p u t Plu g s 30 20 series 10 MECHANICAL DIMENSIONS 0 -10 MECHANICAL DIMENSIONS: ( UNIT: mm ) 0 10 20 30 40 50 TEMPERATURE (°C) (FIG.2) TEMPERATURE DERATING CURVE 60 70 80 OUTPUT CABLE RECOMMEND : 1. Selected output connectors and wire, please refer to Appendix. 2. HPU15-102~104 are required to use AWG#18/4FT output cable. 3. HPU15-105~109 are required to use AWG#20/4FT output cable. 4. HPU15-110~111 required to use AWG#22/4FT output cable. DC OUTPUTare CONNECTIONS 5. The regulation and efficiency will be changed by modified output cable. Coaxial Plug: -Vout +Vout PACKING : 5.5mm outer165g diameter 1. Net weight: approx. 2.1mm inner diameter, femaleavailable contact sales for details. 2. Optional output connectors 11mm length, center “+” Dimensions are in mm [inches] Rating Chart: DERATE CURVES 15 series HPU15-103 HPU15-102 min 1.44 2.40 7.2 The Regulation and Efficiency will change if output (VDC)is modified. (A) (A) (W) cable (VDC) 3.0 (mVp-p) (%) (%) (W) (ms) 66 ±5 65 0.2 12 OLP 50 ±5 80 0.3 12 OLP 8.0 1.50 1.84 12 70 ±5 81 0.3 12 OLP 5.99 2.00 2.40 15W5.0 Interchangeable Medical Grade Power 12 Supply 6.5 Protection Mode 4.99 Hold-Up Time HPU15-101 No Load Consumption Maximum Output Power MODEL NO. dical Typ. Efficiency max Total Regulation min Ripple & Noise max Output Current AHP1501-01~04 Output Cord Length 48”, 18AWG (Based on the AHP1501-05~09 Output Cordoutput Lengthvolt.) 48”, 20AWG AHP1501-110~112 Output Cord Length 48”, 22AWG Voltage Range HPU15-104 8.0 110 11.0 1.22 1.68 13.5 90 ±5 83 0.3 12 OLP eak load when the power supply HPU15-105 starts up. than rated load is not allowed. HPU15-106 condition, each output is checked to be 11.0 100 13.0 1.15 1.36 15 100 ±5 84 0.3 12 OLP 16.0 0.94 1.15 15 100 ±5 85 0.3 12 OLP 21.0 0.72 0.94 15 100 ±5 86 0.3 12 OLP 27.0 0.55 0.72 15 100 ±5 86 0.3 12 OLP 33.0 0.45 0.55 15 100 ±3 86 0.3 12 OLP 40.0 0.37 0.45 15 100 ±3 86 0.3 12 OLP 48.0 0.32 0.37 15 100 ±3 86 0.3 12 OLP 55.0 100 0.28 160 0.32 200 240 15 100 280 ±3 86 0.3 12 OLP 90 16.0 LOAD (%) HPU15-107 changing ±10% of input voltage from 13.0 HPU15-108 21.0 HPU15-109 y changing ±40% of measured output load 27.0 HPU15-110 33.0 by using 20MHz bandwidth limited HPU15-111 d each output with a 0.47uF capacitor at . HPU15-112 om the end of the last charging pulse to the t drops down to low limit of main output at . ed load, and nominal line. energy efficiency of this Series are outlined ed "Test Method for Calculating the Energy Interchangeable AC-DC and AC-AC Power " which is available on the ENERGY STAR 80 70 60 40.0 48.0 50 80 120 140 180 220 INPUT VOLTAGE (VAC) (FIG.1) INPUT VOLTAGE DERATING CURVE 260 110 100 90 80 70 60 50 40 30 20 10 0 -10 ENSIONS: ( UNIT: mm ) WWW.ASTRODYNETDI.COM 0 10 20 30 40 50 TEMPERATURE (°C) (FIG.2) TEMPERATURE DERATING CURVE 60 70 80 OUTPUT CABLE RECOMMEND : 1. Selected output connectors and wire, please refer to Appendix. 2. HPU15-102~104 are required to use AWG#18/4FT output cable. 3. HPU15-105~109 are required to0315 use AWG#20/4FT output cable. 4. HPU15-110~111 are required to use AWG#22/4FT output cable. 5. The regulation and efficiency will be changed by modified output cable. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458