HAF2012(L), HAF2012(S) Silicon N Channel MOS FET Series Power Switching REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Description This FET has the over temperature shut-down capability sensing to the junction temperature. This FET has the built-in over temperature shut-down circuit in the gate area. And this circuit operation to shut-down the gate voltage in case of high junction temperature like applying over power consumption, over current etc. Features • • • • Logic level operation (4 to 6 V Gate drive) High endurance capability against to the short circuit Built-in the over temperature shut-down circuit Latch type shut-down operation (Need 0 voltage recovery) Outline RENESAS Package code: PRSS0004AE-A (Package name: LDPAK (L) ) RENESAS Package code: PRSS0004AE-B (Package name: LDPAK (S)-(1) ) 4 4 1 1 2 3 D Gate Resistor G Temperature Sensing Circuit Latch Circuit Gate Shutdown Circuit S REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 1 of 9 1. Gate 2. Drain 3. Source 4. Drain 2 3 HAF2012(L), HAF2012(S) Absolute Maximum Ratings (Ta = 25°C) Item Drain to source voltage Gate to source voltage Symbol VDSS VGSS VGSS ID Drain current Drain peak current Body-drain diode reverse drain current Channel dissipation Channel temperature Storage temperature Value 60 16 –2.8 20 40 20 50 150 –55 to +150 ID (pulse) Note 1 IDR Pch Note 2 Tch Tstg Unit V V V A A A W °C °C Notes: 1. PW ≤ 10 µs, duty cycle ≤ 1% 2. Value at Ta = 25°C Typical Operation Characteristics (Ta = 25°C) Item Input voltage Symbol VIH VIL Input current (Gate non shut down) Input current (Gate shut down) Shut down temperature Gate operation voltage IIH1 IIH2 IIL IIH (sd) 1 IIH (sd) 2 Tsd VOP REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 2 of 9 Min 3.5 Typ — Max — Unit V — — — — — — — 3.5 — — — — 0.8 0.35 175 — 1.2 100 50 1 — — — 13 V µA µA µA mA mA °C V Test Conditions Vi = 8 V, VDS = 0 Vi = 3.5 V, VDS = 0 Vi = 1.2 V, VDS = 0 Vi = 8 V, VDS = 0 Vi = 3.5 V, VDS = 0 Channel temperature HAF2012(L), HAF2012(S) Electrical Characteristics (Ta = 25°C) Item Symbol ID1 ID2 V (BR) DSS V (BR) GSS V (BR) GSS IGSS1 IGSS2 IGSS3 IGSS4 IGS (op) 1 IGS (op) 2 IDSS VGS (off) RDS (on) RDS (on) |yfs| Coss Min 10 — 60 16 –2.8 — — — — — — — 1.0 — — 6 — Typ — — — — — — — — — 0.8 0.35 — — 50 30 12 630 Max — 10 — — — 100 50 1 –100 — — 250 2.25 65 43 — — Unit A mA V V V µA µA µA µA mA mA µA V mΩ mΩ S pF Turn-on delay time Rise time Turn-off delay time Fall time Body-drain diode forward voltage Body-drain diode reverse recovery time td (on) tr td (off) tf VDF trr — — — — — — 7.5 29 34 26 1.0 110 — — — — — — µs µs µs µs V ns Over load shut down operation time Note4 tos1 tos2 — — 1.8 0.7 — — ms ms Drain current Drain to source breakdown voltage Gate to source breakdown voltage Gate to source leak current Input current (shut down) Zero gate voltage drain current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Output capacitance Notes: 3. Pulse test 4. Including the junction temperature rise of the over loaded condition. REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 3 of 9 Test Conditions VGS = 3.5 V, VDS = 2 V VGS = 1.2 V, VDS = 2 V ID = 10 mA, VGS = 0 IG = 100 µA, VDS = 0 IG = –100 µA, VDS = 0 VGS = 8 V, VDS = 0 VGS = 3.5 V, VDS = 0 VGS = 1.2 V, VDS = 0 VGS = –2.4 V, VDS = 0 VGS = 8 V, VDS = 0 VGS = 3.5 V, VDS = 0 VDS = 50 V, VGS = 0 ID = 1 mA, VDS = 10 V ID = 10 A, VGS = 4 V Note 3 ID = 10 A, VGS = 10 V Note 3 ID = 10 A, VDS = 10 V Note 3 VDS = 10 V, VGS = 0 f = 1 MHz ID = 5 A VGS = 5 V RL = 6 Ω IF = 20 A, VGS = 0 IF = 20 A, VGS = 0 diF/dt = 50 A/µs VGS = 5 V, VDD = 12 V VGS = 5 V, VDD = 24 V HAF2012(L), HAF2012(S) Main Characteristics Power vs. Temperature Derating Maximum Safe Operation Area 500 60 40 20 0 0 50 100 150 Case Temperature ID (A) Thermal shut down 200 Operation area 100 Drain Current Channel Dissipation Pch (W) 80 20 20 µs 50 10 DC 10 5 Tc (°C) 10 50 100 20 VDS (V) ID (A) VDS = 10 V Pulse Test 3.5 V 20 VGS = 3 V 10 0 0 Tc = –25°C 25°C 75°C 20 10 0 2 4 6 Drain to Source Voltage 8 10 0 VDS (V) 1.6 0.8 ID = 20 A 0.4 10 A 5A 0 2 4 6 Gate to Source Voltage 8 10 VGS (V) REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 4 of 9 2 3 4 5 VGS (V) Static Drain to Source on State Resistance vs. Drain Current Drain to Source on State Resistance RDS (on) (Ω) Pulse Test 1 Gate to Source Voltage Drain to Source Saturation Voltage vs. Gate to Source Voltage 0 40 30 4V Drain Current ID (A) 30 Drain Current µs s Typical Transfer Characteristics 5V VDS (on) (V) 5 Drain to Source Voltage Pulse Test 10 V 8V 6V 40 Drain to Source Voltage 0 50 50 1.2 m = er 10 at ion ms (T c= 2 Operation in this area 25 is limited by RDS (on) °C 1 ) Typical Output Characteristics 2.0 Op 0.5 Ta = 25°C 0.3 0.3 0.5 1 2 200 1 PW 0.5 Pulse Test 0.2 0.1 VGS = 4 V 0.05 10 V 0.02 0.01 1 2 5 10 20 Drain Current 50 100 200 ID (A) Static Drain to Source on State Resistance vs. Temperature 0.10 Pulse Test ID = 20 A 0.08 VGS = 4 V 10 A 0.06 5A 0.04 ID = 20 A 5 A, 10 A 0.02 10 V 0 –40 0 40 80 Case Temperature 120 160 Forward Transfer Admittance vs. Drain Current Forward Transfer Admittance |yfs| (S) Static Drain to Source on State Resistance RDS (on) (Ω) HAF2012(L), HAF2012(S) 100 VDS = 10 V Pulse Test 50 20 Tc = –25°C 10 25°C 5 75°C 2 1 0.5 500 50 Switching Time t (µs) Reverse Recovery Time trr (ns) 100 200 100 50 di / dt = 50 A / µs VGS = 0, Ta = 25°C 1 2 5 10 Reverse Drain Current 20 10 20 50 td(off) tf 20 tr td(on) 10 5 2 1 0.1 0.2 50 IDR (A) VGS = 5 V, VDD = 30 V PW = 300 µs, duty ≤ 1 % 0.5 1 2 5 Drain Current 10 20 50 ID (A) Typical Capacitance vs. Drain to Source Voltage Reverse Drain Current vs. Source to Drain Voltage 50 10000 Pulse Test 40 Capacitance C (pF) Reverse Drain Current IDR (A) 5 Switching Characteristics 1000 10 0.5 2 Drain Current ID (A) Tc (°C) Body-Drain Diode Reverse Recovery Time 20 1 30 VGS = 5 V 20 0V 10 3000 1000 Coss 300 100 30 0 VGS = 0 f = 1 MHz 10 0 0.4 0.8 1.2 1.6 2.0 Source to Drain Voltage VSD (V) REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 5 of 9 0 10 20 30 40 50 Drain to Source Voltage VDS (V) HAF2012(L), HAF2012(S) Shutdown Case Temperature vs. Gate to Source Voltage Shutdown Case Temperature Tc (°C) Gate to Source Voltage VGS (V) Gate to Source Voltage vs. Shutdown Time of Load-Short Test 10 VDD = 36 V 8 24 V 12 V 6 9V 4 2 0 0.1 0.2 0.5 1 2 5 10 20 50 100 200 ID = 5 A 180 160 140 120 100 0 Shutdown Time of Load-Short Test PW (ms) 2 4 6 Gate to Source Voltage 8 VGS (V) TTL Drive Characteristics 10 Input Voltage VI (V) 8 0.8 6 0.6 VI 0.4 4 II 2 0 0.01 0.03 0.2 Input Current II (mA) 1.0 ID = 5 A 0 0.1 0.3 1 3 10 Gate Series Resistance RG (kΩ) Normalized Transient Thermal Impedance γ s (t) Normalized Transient Thermal Impedance vs. Pulse Width 3 Tc = 25°C 1 D=1 0.5 0.3 0.2 θch – c (t) = γ s (t) • θch – c θch – c = 2.50°C/W, Tc = 25°C 0.1 0.1 0.05 0.03 0 1 0.0 h 1s 0.01 10 µ D= PDM .02 p ot uls e 100 µ 10 m 100 m Pulse Width PW (S) REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 6 of 9 PW T PW T 1m 1 10 10 HAF2012(L), HAF2012(S) Test Circuit RL 5A ID 0 + – II Rg HD74LS08 VCC =5V D.U.T VI 0 VI II 0 Thermal shut down Switching Time Test Circuit Waveform 90% Vout Monitor Vin Monitor Vin D.U.T. 10% RL Vout Vin 5V 50 Ω VDD = 30 V 10% 90% td(on) REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 7 of 9 10% tr 90% td(off) tf HAF2012(L), HAF2012(S) Package Dimensions RENESAS Code PRSS0004AE-A MASS[Typ.] 1.40g 4.44 ± 0.2 1.3 ± 0.15 1.3 ± 0.2 1.37 ± 0.2 0.76 ± 0.1 2.54 ± 0.5 2.54 ± 0.5 JEITA Package Code SC-83 RENESAS Code PRSS0004AE-B 2.49 ± 0.2 11.0 ± 0.5 0.2 0.86 +– 0.1 Package Name LDPAK(S)-(1) Unit: mm 10.2 ± 0.3 8.6 ± 0.3 11.3 ± 0.5 0.3 10.0 +– 0.5 Previous Code LDPAK(L) / LDPAK(L)V Previous Code LDPAK(S)-(1) / LDPAK(S)-(1)V 0.4 ± 0.1 MASS[Typ.] 1.30g (1.4) 4.44 ± 0.2 (1.5) 2.54 ± 0.5 REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 8 of 9 0.4 ± 0.1 0.3 3.0 +– 0.5 2.54 ± 0.5 0.2 0.86 +– 0.1 7.8 7.0 + 0.3 – 0.5 2.49 ± 0.2 0.2 0.1 +– 0.1 1.37 ± 0.2 1.3 ± 0.2 7.8 6.6 1.3 ± 0.15 10.0 (1.5) 8.6 ± 0.3 10.2 ± 0.3 Unit: mm 1.7 JEITA Package Code (1.4) Package Name LDPAK(L) 2.2 HAF2012(L), HAF2012(S) Ordering Information Part Name HAF2012-90L HAF2012-90S HAF2012-90STL HAF2012-90STR Quantity Max: 50 pcs/sack Max: 50 pcs/sack 1000 pcs/Reel 1000 pcs/Reel REJ03G1139-0400 Rev.4.00 Jul 13, 2007 Page 9 of 9 Shipping Container Sack Sack Embossed tape Embossed tape Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2007. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.0