New Product DG4051A/DG4052A/DG4053A Vishay Siliconix 8-Channel, Dual 4-Channel, Triple 2-Channel Multiplexers, with 0.5 pC Charge Injection DESCRIPTION FEATURES The DG4051A, DG4052A and DG4053A are precision low voltage, single and dual supply CMOS analog multiplexers. The DG4051A is an 8-channel multiplexer, the DG4052A is a dual 4-channel multiplexer and the DG4053A is a triple 2-channel multiplexer or triple SPDT. They are designed to operate from a + 2.7 V to + 12 V single supply or from ± 2.5 V to ± 5 V dual supplies and are fully specified at + 3 V, + 5 V and ± 5 V. All control logic inputs have guaranteed 2.0 V high limit when operating from + 5 V or ± 5 V supplies and 1.4 V when operating from a + 3 V supply. The DG4051A, DG4052A and DG4053A switches conduct equally well in both directions, offer rail to rail analog signal handling and can be used both as multiplexers as well as de-multiplexers. < 0.5 pC low charge injection coupled with very low switch capacitance make these products ideal for precision instrumentation multiplexers. Operating temperature is specified from - 40 °C to + 125 °C. The DG4051A, DG4052A and DG4053A are available in 16 lead SOIC, TSSOP and the space saving 1.8 x 2.6 mm miniQFN packages. • + 2.7 V to + 12 V single supply operation ± 2.5 V to ± 5 V dual supply operation • Fully specified at + 3 V, + 5 V, ± 5 V RoHS COMPLIANT • 100 Ω maximum on-resistance • Low voltage, 2.5 V CMOS/TTL compatible • Low charge injection (< 0.5 pC typ.) • High bandwidth: 330 MHz to 700 MHz • Low switch capacitance (Cs(off) 3 pF typ.) • Excellent isolation and crosstalk performance (typ. 47 dB at 100 MHz) • 16 pin SOIC, TSSOP and miniQFN package (1.8 x 2.6 mm) • Fully specified from - 40 °C to + 85 °C and - 40 °C to + 125 °C APPLICATIONS • • • • • • Precision instrumentation Sample and hold applications Medical instruments High speed communication applications Automated test equipment High-end data acquisition FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG4051A TSSOP16 DG4053A TSSOP16 DG4052A TSSOP16 X4 1 16 VCC Y0 1 16 VCC Y1 1 16 VCC X6 2 15 X2 Y2 2 15 X2 Y0 2 15 Y X 3 14 X1 Y 3 14 X1 Z1 3 14 X X7 4 13 X0 Y3 4 13 X Z 4 13 X1 X5 5 12 X3 Y1 5 12 X0 Z0 5 12 X0 ENABLE 6 11 A ENABLE 6 11 X3 ENABLE ENABLE 6 11 A VEE 7 10 B VEE 7 10 A VEE 7 10 B GND 8 9 C GND 8 9 B GND 8 9 C Logic Top View Logic Top View Top View ENABLE = LO, all switches are controlled by addr pins. ENABLE = HI, all switches are off. Document Number: 69828 S-80839-Rev. B, 21-Apr-08 www.vishay.com 1 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG4051A mQFN-16 DG4053A mQFN-16 DG4052A mQFN-16 X6 X4 VCC X2 Y2 Y0 VCC X2 Y0 Y1 VCC Y 16 15 14 13 16 15 14 13 16 15 14 13 X 1 12 X1 Y 1 12 X1 Z1 1 12 X X7 2 11 X0 Y3 2 11 X Z 2 11 X1 X5 3 10 X3 Y1 3 10 X0 Z0 3 10 X0 ENABLE 4 9 A ENABLE 4 9 X3 ENABLE 4 9 A Logic Logic 5 6 77 8 5 6 7 8 5 6 77 8 VEE GND C B VEE GND B A VEE GND C B Top View Top View Top View Exx Pin 1 Device Marking: Exx for DG4051A (miniQFN16) Fxx for DG4052A Gxx for DG4053A xx = Date/Lot Traceability Code TRUTH TABLE Select Inputs On Switches Enable Input C B A DG4051A DG4052A DG4053A H X X X All Switches Open All Switches Open All Switches Open L L L L X to X0 X to X0, Y to Y0 X to X0, Y to Y0, Z to Z0 L L L H X to X1 X to X1, Y to Y1 X to X1, Y to Y0, Z to Z0 L L H L X to X2 X to X2, Y to Y2 X to X0, Y to Y1, Z to Z0 L L H H X to X3 X to X3, Y to Y3 X to X1, Y to Y1, Z to Z0 L H L L X to X4 X to X0, Y to Y0 X to X0, Y to Y0, Z to Z1 L H L H X to X5 X to X1, Y to Y1 X to X1, Y to Y0, Z to Z1 L H H L X to X6 X to X2, Y to Y2 X to X0, Y to Y1, Z to Z1 L H H H X to X7 X to X3, Y to Y3 X to X1, Y to Y1, Z to Z1 ORDERING INFORMATION Temp Range Package Part Number 16-Pin TSSOP DG4051AEQ-T1-E3 DG4052AEQ-T1-E3 DG4053AEQ-T1-E3 16-Pin miniQFN DG4051AEN-T1-E4 DG4052AEN-T1-E4 DG4053AEN-T1-E4 DG4051A/4052A/4053A - 40 °C to 125 °Ca Notes: a. - 40 °C to 85 °C datasheet limits apply. www.vishay.com 2 Document Number: 69828 S-80839-Rev. B, 21-Apr-08 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Limit V+ to V- Unit 14 GND to V- 7 V (V-) - 0.3 to (V+) + 0.3 or 30 mA, whichever occurs first a Digital Inputs , VS, VD Continuous Current (Any Terminal) 30 Peak Current, S or D (Pulsed 1 ms, 10 % Duty Cycle) 100 Storage Temperature mA - 65 to 150 Power Dissipationb Thermal Resistanceb 16-Pin TSSOPc 450 16-Pin miniQFNd, e 525 16-Pin TSSOP 178 16-Pin miniQFNe 152 °C mW C/W Notes: a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 5.6 mW/°C above 70 °C. d. Derate 6.6 mW/°C above 70 °C. e. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. SPECIFICATIONS FOR DUAL SUPPLIES Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 2.0 V, 0.8 Va Temp.b VANALOG Full RON IS = 1 mA, VD = - 3 V, 0 V, + 3 V Room Full 66 100 125 100 118 ΔRON IS = 1 mA, VD = ± 3 V Room Full 3 6 10 6 8 RFLATNESS IS = 1 mA, VD = - 3 V, 0 V, + 3 V Room Full 7.9 12 16 12 14 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Parameter Symbol - 40 to 125 °C Typ.c Min.d - 40 to 85 °C Max.d Min.d 5 -5 Max.d Unit 5 V Analog Switch On-Resistance On-Resistance Match On-Resistance Flatness Switch Off Leakage Current IS(off) ID(off) V+ = 5.5 V, V- = - 5.5 V, VD = ± 4.5 V, VS = 4.5 V ± Analog Signal Rangee -5 ID(on) V+ = 5.5 V, V- = - 5.5 V, VS = VD = ± 4.5 V Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Input Current, VIN Low IIL VIN(A, B, C and ENABLE) Under Test = 0.8 V Full 0.01 -1 1 -1 1 Input Current, VIN High IIH VIN(A, B, C and ENABLE) Under Test = 2.0 V Full 0.01 -1 1 -1 1 Input Capacitancee CIN f = 1 MHz Room 3.4 Channel On Leakage Current Ω nA Digital Control µA pF Dynamic Characteristics Off Isolation OIRR Channel-to-Channel Crosstalk XTALK Bandwith, 3dB Document Number: 69828 S-80839-Rev. B, 21-Apr-08 RL = 50 Ω, CL = 1 pF BW RL = 50 Ω f = 10 MHz Room 67 f = 100 MHz Room 46 f = 10 MHz Room 67 f = 100 MHz Room 47 DG4051A Room 330 DG4052A Room 450 DG4053A Room 730 dB MHz www.vishay.com 3 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix SPECIFICATIONS FOR DUAL SUPPLIES Parameter Symbol Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 2.0 V, 0.8 Va - 40 to 125 °C Min.d Max.d - 40 to 85 °C Temp.b Typ.c Min.d Max.d Room Full 36 110 127 110 117 Room Full 31 108 119 108 114 Room Full 29 92 103 92 98 Room Full 6 2 2 Room 0.25 Room < - 90 Room < - 90 Room 3 Room 12 Room 17 Room 0.28 Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 Unit Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay tD Charge Injectione Q Off Isolatione OIRR Channel-to-Channel Crosstalke XTALK Source Off Capacitancee CS(off) Drain Off Capacitancee CD(off) Channel On Capacitancee CD(on) Total Harmonic Distortione THD RL = 300 Ω, CL = 35 pF See Figure 1, 2, 3 Vg = 0 V, Rg = 0 Ω, CL = 1 nF RL = 50 Ω, CL = 1 pF f = 100 kHz f = 1 MHz Signal = 5 VRMS, 20 Hz to 20 kHz, RL = 600 Ω ns pC dB pF % Power Supplies Power Supply Current I+ Negative Supply Current I- Ground Current IGND www.vishay.com 4 VCC = + 5 V, VEE = - 5 V VIN(A, B, C and ENABLE) = 0 or 5 V 1 10 1 10 µA Document Number: 69828 S-80839-Rev. B, 21-Apr-08 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Test Conditions Unless Otherwise Specified VCC = + 5 V, VEE = 0 V Parameter Symbol - 40 to 125 °C VIN(A, B, C and ENABLE) = 2.0 V, 0.8 Va Temp.b Typ.c Min.d - 40 to 85 °C Max.d Min.d 5 0 Max.d Unit 5 V Analog Switch Analog Signal Rangee On-Resistance On-Resistance Match On-Resistance Flatness Switch Off Leakage Current VANALOG Full RON IS = 1 mA, VD = 0 V, + 3.5 V Room Full 107 165 205 165 194 ΔRON IS = 1 mA, VD = + 3.5 V Room Full 3.2 8 13 8 11 rFLATNESS IS = 1 mA, VD = 0 V, + 3 V Room Full 8.2 17 21 17 19 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 IS(off) ID(off) V+ = + 5.5 V, V- = 0 V VD = 1 V/4.5 V, VS = 4.5 V/1 V 0 ID(on) V+ = + 5.5 V, V- = 0 V VD = VS = 1 V/4.5 V Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Input Current, VIN Low IL VIN(A, B, C and ENABLE) Under Test = 0.8 V Full 0.01 -1 1 -1 1 Input Current, VIN High IH VIN(A, B, C and ENABLE) Under Test = 2.0 V Full 0.01 -1 1 -1 1 Room Full 38 121 143 121 134 Room Full 38 110 126 110 119 Room Full 38 103 118 103 111 Room Full 10 2 2 Full 0.5 Room < - 90 Room < - 90 Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 Channel On Leakage Current Ω nA Digital Control µA Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay tD Charge Injectione Q Off Isolation e Channel-to-Channel Crosstalke OIRR XTALK RL = 300 Ω, CL = 35 pF See Figure 1, 2, 3 Vg = 0 V, Rg = 0 Ω, CL = 1 nF RL = 50 Ω, CL = 1 pF f = 100 kHz ns pC dB Power Supplies Power Supply Current I+ Negative Supply Current I- Ground Current Document Number: 69828 S-80839-Rev. B, 21-Apr-08 IGND VIN(A, B, C and ENABLE) = 0 or 5 V 1 10 1 10 µA www.vishay.com 5 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix SPECIFICATIONS FOR UNIPOLAR SUPPLIES Test Conditions Unless Otherwise Specified VCC = + 3 V, VEE = 0 V Parameter Symbol - 40 to 125 °C VIN(A, B, C and ENABLE) = 1.4 V, 0.6 Va Temp.b Typ.c Min.d - 40 to 85 °C Max.d Min.d 3 0 Max.d Unit 3 V 265 298 Ω Analog Switch Analog Signal Rangee On-Resistance Switch Off Leakage Current VANALOG Full RON Room Full 175 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 IS(off) ID(off) IS = 1 mA, VD = 1.5 V V+ = + 3.3 V, V- = 0 V VD = 0.3 V/3.0 V, VS = 3.0 V/0.3 V 0 265 310 ID(on) V+ = + 3.3 V, V- = 0 V VD = VS = 0.3 V/3.0 V Room Full ± 0.02 -1 - 50 1 50 -1 -5 1 5 Input Current, VIN Low IL VIN(A, B, C and ENABLE) Under Test = 0.6 V Full 0.01 -1 1 -1 1 Input Current, VIN High IH VIN(A, B, C and ENABLE) Under Test = 1.4 V Full 0.01 -1 1 -1 1 Room Full 81 172 218 172 194 Room Full 71 151 183 151 167 Room Full 69 138 161 138 151 Room Full 23 5 5 Room 0.5 Room < - 90 Room < - 90 Room Full 0.05 Room Full - 0.05 -1 - 10 -1 - 10 Room Full - 0.05 -1 - 10 -1 - 10 Channel On Leakage Current nA Digital Control µA Dynamic Characteristics Transition Time tTRANS Enable Turn-On Time tON Enable Turn-Off Time tOFF Break-Before-Make Time Delay tD Charge Injectione Q Off Isolation e Channel-to-Channel Crosstalke OIRR XTALK RL = 300 Ω, CL = 35 pF See Figure 1, 2, 3 Vg = 0 V, Rg = 0 Ω, CL = 1 nF RL = 50 Ω, CL = 1 pF f = 100 kHz ns pC dB Power Supplies Power Supply Current I+ Negative Supply Current I- Ground Current IGND VIN(A, B, C and ENABLE) = 0 or 3 V 1 10 1 10 µA Notes: a. VIN = input voltage to perform proper function. b. Room = 25 °C, Full = as determined by the operating temperature suffix. c. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. d. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. e. Guaranteed by design, not subject to production test. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. www.vishay.com 6 Document Number: 69828 S-80839-Rev. B, 21-Apr-08 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 500 300 450 T = 25 °C Is = 1 mA R ON - On-Resistance (Ω) 400 VCC = 3.0 V 350 300 VCC = 5.0 V VCC = 12 V 250 T = 25 °C Is = 1 mA 250 RON - On-Resistance (Ω) VCC = 2.7 V 200 150 100 200 VCC = + 2.7 V VEE = - 2.7 V 150 VCC = + 5.0 V VEE = - 5.0 V VCC = + 6.2 V VEE = - 6.2 V 100 50 50 0 -8 0 0 2 4 6 8 10 12 14 -6 -4 -2 0 2 4 6 VD - Analog Voltage (V) On-Resistance vs. VD and Single Supply Voltage On-Resistance vs. VD and Dual Supply Voltage 500 400 VCC = 3.0 V, VEE = 0 V Is = 1 mA 450 VCC = 5.0 V, VEE = 0 V Is = 1 mA 350 + 125 °C + 85 °C + 25 °C - 40 °C 400 - 40 °C RON - On-Resistance (Ω) RON - On-Resistance (Ω) 8 VD - Analog Voltage (V) 350 + 25 °C + 125 °C 300 + 85 °C 250 200 150 300 250 200 150 100 100 50 50 0 0 0.5 1 1.5 2 2.5 0 0.0 3 0.5 1.0 1.5 VD - Analog Voltage (V) 3.0 3.5 4.0 4.5 5.0 On-Resistance vs. Analog Voltage and Temperature at VCC = + 5 V, VEE = 0 V 10 mA 250 VCC = 5.0 V, VEE = - 5.0 V Is = 1 mA VCC = + 5 V VEE = - 5 V 1 mA + 125 °C + 85 °C + 25 °C - 40 °C 175 100 µA Supply Current (A) 200 R ON - On-Resistance (Ω) 2.5 VD - Analog Voltage (V) On-Resistance vs. Analog Voltage and Temperature at VCC = + 3 V, VEE = 0 V 225 2.0 150 125 100 ICC 10 µA IEE 1 µA IGND 100 nA 75 10 nA 50 1 nA 25 0 -5 100 pA -4 -3 -2 -1 0 1 2 3 4 5 10 100 1K 10k 100k 1M 10M VD - Analog Voltage (V) Input Switching Frequency (Hz) On-Resistance vs. Analog Voltage and Temperature at VCC = + 5 V, VEE = - 5 V Supply Current vs. Input Switching Frequency Document Number: 69828 S-80839-Rev. B, 21-Apr-08 www.vishay.com 7 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 100000 VCC = + 13.2 V VEE = 0 V VCC = + 5.5 V VEE = - 5.5 V 10000 Leakage Currrent (pA) Leakage Currrent (pA) 10000 100000 1000 ID(OFF) 100 ID(ON) 1000 100 1 - 60 - 40 - 20 0 20 40 60 10 80 1 - 60 - 40 - 20 100 120 140 40 60 80 100 Leakage Current vs. Temperature Leakage Current vs. Temperature 120 140 10 tOFF VCC = + 3.0 V, VEE = 0 V 100 - 10 tON VCC = + 3.0 V, VEE = 0 V tOFF VCC = + 5.0 V, VEE = 0 V 60 40 tON VCC = + 5.0 V, VEE = 0 V 20 tOFF /tON 0 - 60 - 40 - 20 0 20 40 60 80 Loss 0 Loss, OIRR, X TALK (dB) t ON(EN), t OFF(EN) - Switching Time (ns) 20 Temperature (°C) - 20 - 30 - 40 - 50 OIRR - 60 - 70 - 80 XTALK - 90 VCC = + 5.0 V, VEE = - 5.0 V - 100 100 K 100 120 140 1M 10 - 20 Loss, OIRR, X TALK (dB) - 10 - 30 - 40 OIRR - 50 - 60 XTALK - 70 VCC = + 5.0 V VEE = - 5.0V RL = 50 Ω - 80 - 90 1M Loss 0 - 20 10 M 100 M Frequency (Hz) DG4052A Insertion Loss, Off-Isolation, Crosstalk vs. Frequency at ± 5 V Supply www.vishay.com 8 1G 10 Loss - 10 - 100 100 K 100 M DG4051A Insertion Loss, Off-Isolation, Crosstalk vs. Frequency at ± 5 V Supply Switching Time vs. Temperature 0 10 M VCC = + 5.0 V VEE = - 5.0 V RL = 50 Ω Frequency (Hz) Temperature (°C) Loss, OIRR, X TALK (dB) 0 Temperature (°C) 120 80 ID(ON) IS(OFF) IS(OFF) 10 ID(OFF) 1G - 30 - 40 - 50 OIRR - 60 XTALK - 70 - 80 VCC = + 5.0 V VEE = - 5.0 V - 90 RL = 50 Ω - 100 100 K 1M 10 M 100 M 1G Frequency (Hz) DG4053A Insertion Loss, Off-Isolation, Crosstalk vs. Frequency at ± 5 V Supply Document Number: 69828 S-80839-Rev. B, 21-Apr-08 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 3.0 - 40 °C to + 125 °C Q INJ - Charge Injection (pC) VT - Switching Threshold (V) 2.5 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8 10 12 14 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 - 0.25 - 0.50 - 0.75 - 1.00 - 1.25 - 1.50 - 1.75 - 2.00 -5 VCC = + 5.0 V VEE = - 5.0 V VCC = + 3.0 V VEE = 0 V -4 -3 Q INJ - Charge Injection (pC) Q INJ - Charge Injection (pC) VCC = + 5.0 V VEE = - 5.0 V -4 -3 -2 -1 0 1 VCC = + 5.0 V VEE = 0 V 2 3 4 VS - Analog Voltage (V) DG4052A Charge Injection vs. Analog Voltage Document Number: 69828 S-80839-Rev. B, 21-Apr-08 0 1 2 3 4 5 DG4051A Charge Injection vs. Analog Voltage Switching Threshold vs. VCC Supply Voltage VCC = + 3.0 V VEE = 0 V -1 VS - Analog Voltage (V) VCC Supply Voltage (V) 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 - 0.25 - 0.50 - 0.75 - 1.00 - 1.25 - 1.50 - 1.75 - 2.00 -5 -2 VCC = + 5.0 V VEE = 0 V 5 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0.00 - 0.25 - 0.50 - 0.75 - 1.00 - 1.25 - 1.50 - 1.75 - 2.00 -5 VCC = + 5.0 V VEE = - 5.0 V VCC = + 5.0 V VEE = 0 V VCC = + 3.0 V VEE = 0 V -4 -3 -2 -1 0 1 2 3 4 5 VS - Analog Voltage (V) DG4053A Charge Injection vs. Analog Voltage www.vishay.com 9 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix TEST CIRCUITS VCC VCC VCC 50 Ω X0 A B C VX0 50 % VA,B,C 0V X1 - X6 DG4051A X7 VO X ENABLE GND VX0 or VY0 or VZ0 VX7 VEE 300 Ω 35 pF VO 50 % VX7 VX3 or VY3 VX1 or VY1 or VZ1 tTRANS VEE X0 or Y0 or Z0 ON VCC VCC X0 or Y0 VX0 or VY0 X1 - X2 or Y1 - Y2 DG4052A X3 or Y3 VX3 or VY3 A B 50 Ω ENABLE GND 90 % VO X or Y VEE X7 ON (DG4051A) or X3 or Y3 ON (DG4052A) or X1 or Y1 or Z1 ON (DG4053A) 300 Ω 35 pF VEE VCC VCC X0 or Y0 or Z0 A or B or C VX0 or VY0 or VZ0 50 Ω DG4053A X1 or Y1 or Z1 ENABLE GND VX1 or VY1 or VZ1 VO X or Y or Z VEE 300 Ω 35 pF VEE Figure 1. Transition Time www.vishay.com 10 Document Number: 69828 S-80839-Rev. B, 21-Apr-08 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix TEST CIRCUITS VCC VCC VCC A B C X0 VCC VENABLE X1 - X7 DG4051A VX0 or VY0 or VZ0 VEE GND VO X ENABLE 50 Ω 50 % 0V 300 Ω 35 pF VO 50 % 90 % 0V t ON VEE X0 or Y0 or Z0 ON VCC VCC X0 or Y0 A B X7 ON (DG4051A) or X3 or Y3 ON (DG4052A) or X1 or Y1 or Z1 ON (DG4053A) VCC X1 - X3 or Y1 - Y3 DG4052A 50 Ω VEE GND VO X or Y ENABLE 300 Ω 35 pF VEE VCC VCC X0 or Y0 or Z0 A or B or C VCC X1 or Y1 or Z1 DG4053A ENABLE 50 Ω GND VO X or Y or Z VEE 300 Ω 35 pF VEE Figure 2. Enable Switching Time Document Number: 69828 S-80839-Rev. B, 21-Apr-08 www.vishay.com 11 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix TEST CIRCUITS VCC VCC VCC 50 Ω X0 - X7 A B C VCC VA,B,C DG4051A GND VX0 or VY0 or VZ0 VO X ENABLE 50 % 0V VEE 300 Ω 80 % VO 35 pF 0V tD VEE VCC VCC A B X0 - X3 or Y0- Y3 VCC 50 Ω DG4052A GND VO X or Y ENABLE VEE 300 Ω 35 pF VEE VCC VCC X0, X1 or Y0, Y1 or Z0, Z1 A or B or C VCC 50 Ω DG4053A ENABLE GND VO X or Y or Z VEE 300 Ω 35 pF VEE Figure 3. Break-Before-Make VCC tr < 5 ns tf < 5 ns VCC Channel Select VCC A B C VENABLE Rg OFF ON OFF 0V Xx or Yx or Zx Vg VO ENABLE GND VO X or Y or Z VEE ΔVO 1 nF VEE Figure 4. Charge Injection www.vishay.com 12 Document Number: 69828 S-80839-Rev. B, 21-Apr-08 New Product DG4051A/DG4052A/DG4053A Vishay Siliconix TEST CIRCUITS VCC VCC Network Analyzer VCC A B C Network Analyzer VCC VIN A B C X0 or Y0 or Z0 Rg = 50 Ω Vg X or Y or Z ENABLE VOUT VCC V EE GND X0 or Y0 or Z0 Vg Rg = 50 Ω VOUT X or Y or Z ENABLE VEE GND 50 Ω VIN V EE 50 Ω VEE Insertion Loss = 20 log VOUT VIN Off Isolation = 20 log Figure 5. Insertion Loss VOUT VIN Figure 6. Off Isolation VCC VCC Network Analyzer VCC X0 or Y0 or Z0 A B C VIN Vg Rg = 50 Ω Channel Select VCC X0 or Y0 or Z0 | to | Xx or Yx or Zx A B C X or Y or Z 50 Ω ENABLE Xx or Yx or Zx GND VOUT VEE 50 Ω ENABLE GND Impedance Analyzer X or Y or Z VEE VEE Crosstalk = 20 log VOUT VIN Figure 7. Crosstalk VEE Figure 8. Source, Drain Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?69828. Document Number: 69828 S-80839-Rev. B, 21-Apr-08 www.vishay.com 13 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1