COMPACT POWER RELAY 1 POLE—20 A (For Automotive Applications) FBR53 SERIES n FEATURES l l l l Compact for high density packaging High contact capability (40A continuous) High temperature grade (-40˚C to 125˚C) Contact arrangement Form U (form A) n ORDERING INFORMATION [Example] FBR53 (a) ND 012 -Y - *** (b) (c) (d) (e) (a) Series Name FBR-53 : FBR-53 Series (b) Contact Arrangement ND : Form U (c) Nominal Voltage 09 10 12 : 9 VDC : 10 VDC : 12 VDC (d) Contact Material Y : Silver Tin Oxide Alloy (e) Custom designation Nil -HW : Standard : High capacity Note: The part number on the relay cover does not include 'FBR' Example: Ordering part number: FBR-53ND12-Y Stamped part number: 53ND12-Y FBR53 SERIES n COIL DATA CHART Standard Nominal Voltage Coil Resistance (±10% at 20˚C) FBR53ND09-Y 9 VD C 13 5 Ω 5.4 VDC (at 20˚C) 6.8 VDC (at 85˚C) FBR53ND10-Y 10 VD C 18 0 Ω 6.3 VDC (at 20˚C) 7.9 VDC (at 85˚C) FBR53ND12-Y 12VD C 24 0 Ω 7.3 VDC (at 20˚C) 9.2 VDC (at 85˚C) Nominal Voltage Coil Resistance (±10% at 20˚ C) FBR53ND09-Y-HW 9 VD C 94 Ω 5.4 VDC (at 20˚C) 7.7 VDC (at 125˚C) FBR53ND10-Y-HW 10 VD C 11 7 Ω 6.3 VDC (at 20˚C) 9.0 VDC (at 125˚C) FBR53ND12-Y-HW 12VD C 16 7Ω 7.3 VDC (at 20˚C) 10.4 VDC (at 125˚C) Model Must Operate Voltage High capacity Model Must Operate Voltage FBR53 SERIES n SPECIFICATIONS It em Contact Coil Life -HW Form U (Form A) Material Silver Tin Oxide Contact rating DC 14V, 20A (resistive load) Maximum Carrying Current 20A continuous (10A each contact) at 25˚ C 40A continuous (20A each contact) at 25˚ C Maximum Inrush Current 60A inrush (30A each contact) at 25˚ C 80A inrush (40A each contact) at 25˚ C Contact Resistance Average 1.5mΩ at 7A, 12 VDC Coil Power Consumption (at rated coil voltage) Approximately 0.6 W Operating Temperature Range -40° C to +125° C (no frost) Storage Temperature Range -40° C to +125° C (no frost) Operating Humidity 45 to 85%RH Approximately 0.86 W 100MΩ maximum at 500VDC, (at 20˚ C, 65%RH) 500 VAC 50/60 Hz 1 minute, (at 20˚ C, 65%RH) Operate (at nominal voltage) 10 ms maximum Release (at nominal voltage) 5 ms maximum Mechanical 10x106 operations minimum (with no load for contact) Electrical 1x105 operations minimum (14VDC 20A resistive load) Vibration resistance Other Standard Arrangement Initial resistance Insulation Dielectric withstanding voltage between coil and contacts Time Sp ec i f i c at i o n Shock resistance Terminal Weight Misoperation 10-55Hz,1.5mm dual amplitude, direction X, Y, Z Endurance 10 to 100Hz, 1.5mm dual amplitude, direction X, Y, Z. Not be damaged (mechanical and technical) after test. Coil energizing: 1 hr in each direction, Coil nonenergizing: 1 hr in each direction Misoperation 100 m/s2 (11ms), direction X, Y, Z Endurance 1000 m/s2 (11ms), direction X, Y, Z, each 6 times Not be damaged (mechanical and technical) after test. Coil energizing: 3 times; Coil non-energizing: 3 times, total 36 times. Solderability at 270±10˚ C for 3±0.5sec. (terminals must be soldered) Strength Pulling a terminal in its longitudinal direction for 10 sec. at 9.8N (1 Kgf) Approximately 6 grams *This is the standard value of the minimum load level. This value may differ depending on the switching frequency, environmental conditions and target reliability standard. We recommend to check this value by an actual load prior to use. FBR53 SERIES n DIMENSIONS Standard 5.7+0 2.3 +0 3 -0 solder Terminal dimensions (±0.) COM terminal (2) .2 x t0.26 Coil terminal (2) .0 x t0.3 N.O. terminal (2) .2 x t0.4 5.0±0.2 0.6±0.2 7.0±0.2 2.5±0.2 0.0±0.2 • Mounting hole layout (bottom view) • Schematic (bottom view) 2.5 0.6 (.25) 5.0 7.0 3.5±0.3 .25±0.20 2-Ø.3 +0. -0 0.0 4.0+0 • Dimensions 4-Ø.5 +0. -0 Unit: mm FBR53 SERIES High Capacity • Dimensions 5.5±0.2 0.4 3.7±0.3 2.±0.2 Com terminal 2.2 x t0.26 Coil terminal .0 x t0.3 N.O. terminal 2.2 x t0.4 0.6 2.5 .25 -0.2 • Schematic +0.2 -0.2 +0.2 -0.2 +0.2 -0.2 6 0 • PCB Mounting hole layout (bottom view) 2.5 0.6 (.25) 4.0 (bottom view) 4 +0. 2 - Ø.3 -0 Tolerance: ±0.1mm 2 - 2.5 x 0.6 +0. -0 6.0 0.0 3.5 +0.3 -0.3 +0.2 +0.2 -0.2 +0.2 -0.2 2 - 2.5 x 0.7 +0. -0 Unit: mm Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. May10/2006