VISHAY 735P

Type 735P
Vishay Sprague
Film Capacitors
High Current, Wrap-and-Fill,
Metalized Polypropylene
FEATURES
• Wire or lug terminals
• High stability
• High ripple to 30 amperes
• Low inductance
• Low ESR
PERFORMANCE CHARACTERISTICS
DC Life Test: 140% of rated voltage for 1000 hours
@ + 105°C. No visible damage. No open or short circuits.
Maximum ∆ CAP ± 1.0%.
Minimum IR = 50% of initial limit.
Maximum DF = 0.10%.
Humidity Test: 95% relative humidity @ + 40°C for 250
hours. No visible damage.
Maximum ∆ CAP ± 1.0%.
Maximum IR = 20% of initial limit.
Maximum DF = 0.12%.
Operating Temperature: - 55°C to + 105°C.
Capacitance Range: 1.0µF to 30.0µF.
Capacitance Tolerance: ± 10%, ± 5%.
DC Voltage Rating: 100 WVDC to 400 WVDC.
Equivalent Series Resistance: 20kHz to 100kHz.
Dissipation Factor: 0.1% maximum.
Measure at 1000Hz @ + 25°C.
PHYSICAL CHARACTERISTICS
∆V/∆T: 10V/millisecond maximum.
Pull Test:
Wire Leads - 5 pounds (2.3 kilograms) for one minute.
No physical damage.
Terminal Lugs - 10 pounds (4.5 kilograms) for one minute.
No physical damage.
Lead Bend: After three complete consecutive bends,
no damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
Voltage Test: 200% of rated voltage for 2 minutes.
Insulation Resistance: Measure at 100 WVDC after a
2 minute charge.
At + 25°C: 200,000 Megohm - Microfarads, or 400,000
Megohm minimum.
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DIMENSIONS in inches [millimeters]
Terminal Style L
1.750
[44.45]
Min.
L
± 0.062 [1.57]
1.750
[44.45]
Min.
Tinned Solid Copper Wire*
D
Max.
D Max. < 0.700 [17.78], No. 20 AWG wire 0.032 [0.812] nominal diameter.
D Max. ≥ 0.700 [17.78], No. 18 AWG wire 0.040 [1.016] nominal diameter.
Terminal Style H
Tinned Solid Copper Lug
L1
± 0.062 [1.57]
D
Max.
L2
± 0.062 [1.57]
0.360 ± 0.005
[9.14 ± 0.13]
L
± 0.062 [1.57]
0.312 [7.9] Min.
0.156 ± 0.005 Dia.
[3.96 ± 0.13]
0.032 ± 0.002
[0.81 ± 0.05]
L1 = L + 0.766 [19.46]
L2 = L + 0.437 [11.10]
* Leads to be within ± 0.062" [1.57mm] of center line at egress but not less than 0.031" [0.78mm] from edge (Terminal Style L only).
www.vishay.com
94
For technical questions, contact [email protected]
Document Number: 42031
Revision 17-Nov-03
Type 735P
Vishay Sprague
STANDARD RATINGS in inches [millimeters]
ESR LIMIT
(Milliohm)
20kHz 100kHz + 25°C
CASE SIZE
CAPACITANCE
(µF)
PART NUMBER**
D
L
MAXIMUM RIPPLE CURRENT
(Amps rms) @ 20kHz - 100kHz
Case Temperature @
+ 35°C + 45°C + 55°C
+ 65°C
+ 75°C + 85°C
Terminal Style L – Units with Wire Leads
100 WVDC
1.0*
2.0
3.0
5.0
10.0*
20.0
30.0
735P105X9100L
735P205X9100L
735P305X9100L
735P505X9100L
735P106X9100L
735P206X9100L
735P306X9100L
0.531 [13.49]
0.596 [15.14]
0.717 [18.21]
0.733 [18.62]
0.898 [22.81]
1.000 [25.40]
1.200 [30.48]
0.750 [19.05]
0.938 [23.81]
0.938 [23.81]
1.250 [31.75]
1.500 [38.10]
2.250 [57.15]
2.250 [57.15]
15.0
12.0
11.0
10.0
9.0
8.0
6.0
9.2
10.8
12.1
13.8
15.0
15.0
15.0
8.5
10.0
11.2
12.7
15.0
15.0
15.0
7.8
9.1
10.3
11.6
14.2
15.0
15.0
7.0
8.2
9.2
10.4
12.7
15.0
15.0
6.0
7.0
8.0
9.0
11.0
13.6
15.0
4.9
5.8
6.5
7.4
9.0
11.1
12.4
4.5
5.3
5.9
6.7
8.2
10.0
11.4
7.3
12.0
15.0
15.0
15.0
15.0
7.3
12.0
13.8
15.0
15.0
15.0
7.3
11.3
12.6
14.7
15.0
15.0
7.3
10.1
11.3
13.1
15.0
15.0
7.2
8.7
9.8
11.4
13.8
15.0
5.9
7.1
8.0
9.3
11.3
14.1
5.4
6.5
7.3
8.5
10.3
12.8
9.5
15.0
15.0
15.0
15.0
9.5
15.0
15.0
15.0
15.0
9.5
15.0
15.0
15.0
15.0
9.5
13.4
15.0
15.0
15.0
9.5
11.6
13.1
15.0
15.0
7.8
9.5
10.7
12.5
15.0
7.1
8.7
9.8
11.4
14.1
200 WVDC
1.0*
2.0*
3.0
5.0*
10.0*
20.0
735P105X9200L
735P205X9200L
735P305X9200L
735P505X9200L
735P106X9200L
735P206X9200L
0.512 [13.01]
0.698 [17.73]
0.747 [18.97]
0.862 [21.89]
1.030 [26.16]
1.440 [36.58]
1.250 [31.75]
1.250 [31.75]
1.500 [38.10]
1.750 [44.45]
2.250 [57.15]
2.250 [57.15]
20.0
15.0
13.0
11.0
9.0
6.0
400 WVDC
1.0*
2.0*
3.0*
5.0*
10.0*
735P105X9400L
735P205X9400L
735P305X9400L
735P505X9400L
735P106X9400L
0.713 [18.11]
0.895 [22.73]
1.086 [27.58]
1.192 [30.28]
1.668 [42.37]
1.500 [38.10]
1.750 [44.45]
1.750 [44.45]
2.250 [57.15]
2.250 [57.15]
19.0
15.0
12.0
10.0
6.0
Terminal Style H – Units with Terminal Lugs
100 WVDC
1.0
2.0
3.0
5.0
10.0
20.0
30.0
735P105X9100H
735P205X9100H
735P305X9100H
735P505X9100H
735P106X9100H
735P206X9100H
735P306X9100H
0.531 [13.49]
0.596 [15.14]
0.717 [18.21]
0.733 [18.62]
0.898 [22.81]
1.000 [25.40]
1.200 [30.48]
0.875 [22.23]
1.062 [26.97]
1.062 [26.97]
1.375 [34.93]
1.625 [41.28]
2.375 [60.33]
2.375 [60.33]
15.0
12.0
11.0
10.0
9.0
8.0
6.0
10.3
12.0
13.3
14.8
17.8
21.6
24.3
9.5
11.0
12.3
13.7
16.5
20.0
22.5
8.7
10.0
11.2
12.5
15.0
18.3
20.5
7.8
8.9
10.0
11.2
13.5
16.4
18.4
6.7
7.8
8.7
9.7
11.7
14.2
15.9
5.5
6.3
7.1
7.9
9.5
11.6
13.0
5.0
5.8
6.5
7.2
8.7
10.6
11.9
7.3
14.3
15.9
18.3
22.4
27.4
7.3
13.3
14.7
17.0
20.7
25.4
7.3
12.1
13.5
15.5
18.9
23.2
7.3
10.8
12.0
13.9
16.9
20.7
7.3
9.4
10.4
12.0
14.6
17.9
6.4
7.7
8.5
9.8
12.0
14.7
5.8
7.0
7.8
8.9
10.9
13.4
9.5
15.0
21.1
24.4
30.0
9.5
15.0
19.5
22.6
27.8
9.5
15.0
17.8
20.6
25.4
9.5
14.2
15.9
18.5
22.7
9.5
12.3
13.8
16.0
19.7
8.3
10.0
11.3
13.1
16.1
7.5
9.1
10.3
11.9
14.7
200 WVDC
1.0
2.0
3.0
5.0
10.0
20.0
735P105X9200H
735P205X9200H
735P305X9200H
735P505X9200H
735P106X9200H
735P206X9200H
0.512 [13.00]
0.698 [17.73]
0.747 [18.97]
0.862 [21.89]
1.030 [26.16]
1.440 [36.58]
1.375 [34.93]
1.375 [34.93]
1.625 [41.28]
1.875 [47.63]
2.375 [60.33]
2.375 [60.33]
20.0
15.0
13.0
11.0
9.0
6.0
400 WVDC
1.0
2.0
3.0
5.0
10.0
735P105X9400H
735P205X9400H
735P305X9400H
735P505X9400H
735P106X9400H
0.713 [18.11]
0.895 [22.73]
1.086 [27.58]
1.192 [30.28]
1.668 [42.37]
1.625 [41.28]
1.875 [47.63]
1.875 [47.63]
2.375 [60.33]
2.375 [60.33]
19.0
15.0
12.0
10.0
6.0
* These ratings are stocked.
** Part Numbers listed are for a capacitance tolerance of ± 10%. To specify ± 5% tolerance, change the "X9" in the Part Number to "X5".
ORDERING INFORMATION
735P
TYPE
105
CAPACITANCE
X9
CAPACITANCE
TOLERANCE
100
DC VOLTAGE RATING
L
TERMINAL
STYLE
This is expressed in
picofarads. The first two
digits are the significant
figures. The third is the
number of zeros to follow.
X9 = ± 10%
X5 = ± 5%
This is expressed in volts.
L = Wire Leads
H = Lugs
Document Number: 42031
Revision 17-Nov-03
For technical questions, contact [email protected]
www.vishay.com
95
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1