PRODUCT DATASHEET Lena series last update 23/2/2014 DETAILS Product Number CN13455_LENA-X-WAS Family Lena Type RefPack Color white Diameter 111 mm Height 38,2 mm Style round Optic Material Holder Material Fastening screw, socket Status production ready ROHS Comliant Yes Date Updated 23/02/2014 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency CXA2011 Asymmetric degAsymmetric 83 % cd/lm Connector 0.500 - May 31st 2017 6:43 Copyright Ledil Oy - Subject to change without prior notice - Page 1/1 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 2.1 A B C D 39.6 4 4 Isometric view Front view 3 3 43 3.2 111 58.7 3.4 2 4 2 2 Top view Materials Reflector: PC Base part: PC Sublens: PC Note: Using additional sublens add 2,1mm to total height. This drawing is our property. It can't be reproduced or communicated without our written agreement. 1 DRAWN BY - DATE Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE 26.9.2012 CHECKED BY DATE SIZE - DESIGNED BY DATE A4 - - D SCALE PART NUMBER Mechanical drawing LENA-WAS 1 REV 001 1:4 WEIGHT 0,00 mg SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.