AOW12N60/AOWF12N60 600V,12A N-Channel MOSFET General Description Product Summary The AOW12N60 & AOWF12N60 have been fabricated using an advanced high voltage MOSFET process that is designed to deliver high levels of performance and robustness in popular AC-DC applications.By providing low RDS(on), Ciss and Crss along with guaranteed avalanche capability these parts can be adopted quickly into new and existing offline power supply designs. VDS ID (at VGS=10V) 700V@150℃ 12A RDS(ON) (at VGS=10V) < 0.55Ω 100% UIS Tested 100% Rg Tested TO-262 Top View TO-262F Bottom View D Bottom View Top View G D G S S D G G D S S D G S Absolute Maximum Ratings TA=25°C unless otherwise noted AOWF12N60 Symbol Parameter AOW12N60 VDS Drain-Source Voltage 600 VGS Gate-Source Voltage ±30 Continuous Drain Current TC=25°C TC=100°C Pulsed Drain Current C Avalanche Current C Repetitive avalanche energy C Single plused avalanche energy G Peak diode recovery dv/dt TC=25°C Power Dissipation B Derate above 25oC Junction and Storage Temperature Range Maximum lead temperature for soldering purpose, 1/8" from case for 5 seconds Thermal Characteristics Parameter Maximum Junction-to-Ambient A,D 12 ID V 12* 9.7 9.7* A IDM 48 IAR 5.5 A EAR 450 mJ EAS dv/dt 900 5 mJ V/ns W PD 278 28 2.2 0.22 TJ, TSTG -55 to 150 W/ oC °C 300 °C TL Symbol RθJA RθCS RθJC AOW12N60 65 AOWF12N60 65 Units °C/W 0.5 0.45 -4.5 °C/W °C/W Maximum Case-to-sink A Maximum Junction-to-Case * Drain current limited by maximum junction temperature. Rev2: June 2010 Units V www.aosmd.com Page 1 of 6 AOW12N60AOWF12N60 Electrical Characteristics (TJ=25°C unless otherwise noted) Symbol Parameter Conditions Min ID=250µA, VGS=0V, TJ=25°C 600 Typ Max Units STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage BVDSS /∆TJ Zero Gate Voltage Drain Current IDSS Zero Gate Voltage Drain Current IGSS Gate-Body leakage current VDS=0V, VGS=±30V VGS(th) RDS(ON) Gate Threshold Voltage Static Drain-Source On-Resistance VDS=5V ID=250µA gFS Forward Transconductance VSD Diode Forward Voltage IS=1A,VGS=0V IS Maximum Body-Diode Continuous Current Maximum Body-Diode Pulsed Current ISM ID=250µA, VGS=0V, TJ=150°C ID=250µA, VGS=0V Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance SWITCHING PARAMETERS Qg Total Gate Charge Qgs Gate Source Charge V/ oC 0.65 VDS=600V, VGS=0V 1 VDS=480V, TJ=125°C 10 µA ±100 4 4.5 nΑ V VGS=10V, ID=6A 0.46 0.55 Ω VDS=40V, ID=6A 20 1 V 12 A 48 A DYNAMIC PARAMETERS Ciss Input Capacitance Coss V 700 VGS=0V, VDS=25V, f=1MHz VGS=0V, VDS=0V, f=1MHz VGS=10V, VDS=480V, ID=12A 3 0.72 S 1400 1751 2100 pF 130 164 215 pF 10 13 19 pF 2.5 3.3 5 Ω 40 50 nC 9 11 nC Qgd Gate Drain Charge 17.9 27 nC 39 50 ns tD(on) Turn-On DelayTime tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf Turn-Off Fall Time VGS=10V, VDS=300V, ID=12A, RG=25Ω 70 85 ns 122 150 ns 74 90 ns trr Body Diode Reverse Recovery Time IF=12A,dI/dt=100A/µs,VDS=100V 311 373 Qrr Body Diode Reverse Recovery Charge IF=12A,dI/dt=100A/µs,VDS=100V 5.2 6.2 ns µC A. The value of R θJA is measured with the device in a still air environment with T A =25°C. B. The power dissipation P D is based on T J(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Repetitive rating, pulse width limited by junction temperature T J(MAX)=150°C, Ratings are based on low frequency and duty cycles to keep initial TJ =25°C. D. The R θJA is the sum of the thermal impedence from junction to case R θJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of T J(MAX)=150°C. The SOA curve provides a single pulse rating. G. L=60mH, IAS=5.5A, VDD=150V, RG=25Ω, Starting T J=25°C THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev2: June 2010 www.aosmd.com Page 2 of 6 AOW12N60AOWF12N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 30 100 10V VDS=40V 25 -55°C 6.5V 10 6V ID(A) ID (A) 20 15 125°C 10 1 5 25°C VGS=5.5V 0 0.1 0 5 10 15 20 25 30 2 4 VDS (Volts) Fig 1: On-Region Characteristics 8 10 3 Normalized On-Resistance 1.0 0.8 RDS(ON) (Ω) 6 VGS(Volts) Figure 2: Transfer Characteristics 0.6 VGS=10V 0.4 0.2 0 5 10 15 20 2.5 VGS=10V ID=6A 2 1.5 1 0.5 0 -100 25 ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage -50 0 50 100 150 200 Temperature (°C) Figure 4: On-Resistance vs. Junction Temperature 1.0E+01 1.2 40 125°C 1.0E-01 IS (A) BVDSS (Normalized) 1.0E+00 1.1 1 1.0E-02 25°C 1.0E-03 0.9 1.0E-04 0.8 -100 1.0E-05 -50 0 50 100 150 200 TJ (°C) Figure 5:Break Down vs. Junction Temparature Rev2: June 2010 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 AOW12N60AOWF12N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 15 10000 VDS=480V ID=12A Ciss Capacitance (pF) VGS (Volts) 12 9 6 1000 Coss 100 10 3 Crss 0 1 0 10 20 30 40 50 Qg (nC) Figure 7: Gate-Charge Characteristics 60 100 1 10 VDS (Volts) Figure 8: Capacitance Characteristics 100 100 10µs 100µs 1ms 1 10ms DC TJ(Max)=150°C TC=25°C 0.1 1ms 1 10ms TJ(Max)=150°C TC=25°C 0.1 0.01 10µs 100µs RDS(ON) limited 10 ID (Amps) RDS(ON) limited 10 ID (Amps) 0.1 DC 0.1s 1s 0.01 1 10 100 1000 1 10 100 1000 VDS (Volts) VDS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area for AOW12N60 (Note F) Figure 10: Maximum Forward Biased Safe Operating Area for AOWF12N60 (Note F) 14 Current rating ID(A) 12 10 8 6 4 2 0 0 75 100 125 TCASE (°C) Figure 11: Current De-rating (Note B) Rev2: June 2010 25 50 150 www.aosmd.com Page 4 of 6 AOW12N60AOWF12N60 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS ZθJC Normalized Transient Thermal Resistance 10 1 D=Ton/T TJ,PK=TC+PDM.ZθJC.RθJC RθJC=0.45°C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD Ton 0.01 T Single Pulse 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 12: Normalized Maximum Transient Thermal Impedance for AOW12N60 (Note F) ZθJC Normalized Transient Thermal Resistance 10 1 In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse D=Ton/T TJ,PK=TC+PDM.ZθJC.RθJC RθJC=4.5°C/W 0.1 PD 0.01 Ton Single Pulse 0.001 0.00001 0.0001 0.001 0.01 0.1 1 T 10 100 1000 Pulse Width (s) Figure 13: Normalized Maximum Transient Thermal Impedance for AOWF12N60 (Note F) Rev2: June 2010 www.aosmd.com Page 5 of 6 AOW12N60AOWF12N60 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + VDC - VDC DUT Qgs Vds Qgd - Vgs Ig Charge Res istive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs Rg + VDC 90% Vdd - 10% Vgs Vgs t d(on) tr t d(off) t on tf t off Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L EAR= 1/2 LI Vds 2 BVDSS AR Vds Id + Vgs Vgs VDC Rg - Vdd I AR Id DUT Vgs Vgs Diode Recovery Tes t Circuit & Waveforms Qrr = - Idt Vds + DUT Vds - Isd Vgs Ig Rev2: June 2010 Vgs L Isd + VDC - IF trr dI/dt IRM Vdd Vdd Vds www.aosmd.com Page 6 of 6