D2UB05 THRU D2UB100 Single Phase 2.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes FEATURES Package: D3K ◆Ideal for printed circuit boards ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃/10 seconds ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked on body ◆Mounting Torque: 0.8N·m ◆Recommended Torque: 0.5N·m Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number D2UB D2UB D2UB D2UB D2UB D2UB D2UB 05 10 20 40 60 80 100 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking Voltage Maximum Average Forward T C= 100℃ Rectified Current at T A= 40℃ (1) IF(AV) Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) Maximum Instantaneous Forward Voltage @ 2A 2.0 A 1.0(2) IFSM 35 VF 1.1 A V Rating for fusing (3ms≤t<8.3ms) Tj=25℃ 2 It 3.5 A sec Maximum DC Reverse Current @ T A=25℃ IR 5.0 μA RθJA 40 RθJC 3.5 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range 2 ℃/W NOTE：1. Unit case mounted on 1.6*1.6*0.06” thick (5.1*5.1*0.15cm) Al.Plate 2. Unit mounted on P.C.B. with 0.5*0.5” (12.7*1.27mm) copper pads and 0.375” (9.5mm) lead length Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 D2UB05 THRU D2UB100 RATING AND CHARACTERISTIC CURVES D2UB05 THRU D2UB100 FIG. 1-MAXIMUM NONO-REPETITIVE FORWARD SURGE CURRENT FIG. 2-MAXIMUM FORWARD CURRENT DERATING CURVE PER BRIDGE ELELMENT AMBIENT TEMPERATURE.(℃) NUMBER OF CYCLES AT 60Hz FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4-TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT PER BRIDGE ELEMENT INSTANTANEOUS FORWARD VOLTAGE.(V) PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2