The ACTF9045-1855.0-DCC6C is a low-loss, compact, and economical surface-acoustic-wave (SAW) RF filter in a surface-mount ceramic DCC6C case for Korean PCS applications, Rx. 1. Package Dimensions (DCC6C) 2. Marking Top View, Laser Printing 4. Typical Frequency Response Pin Configuration 2 Input 5 Output 1, 3, 4, 6 Case Ground Sign Data (unit: mm) Sign Data (unit: mm) A 0.6 E 1.1 B 1.5 F 3.0 C 1.5 G 3.0 D 1.8 3. Test Circuit 5. Performance 5-1. Maximum Ratings Rating Value Unit P 10 dBm DC Voltage VDC 5 V Operable Temperature Range TA -20 to +75 ℃ Storage Temperature Range Tstg -40 to +85 ℃ Input Power Level 5-2. Electronic Characteristics Characteristic Minimum Typical Maximum Unit -- 1855.0 -- MHz 1840 …. 1870 MHz -- 3.0 4.5 dB 1840 …. 1870 MHz -- 1.4 2.0 20 28 25 27 27 40 35 37 ----- dB dB dB dB -- 0.8 1.5 dB Center Frequency fC Insertion Loss IL VSWR ± Absolute Attenuation 1440 …. 1470 MHz 1750 …. 1780 MHz 1930 …. 1960 MHz 2240 …. 2270 MHz Amplitude Ripple (p-p) ”± 1840 …. 1870 MHz Input / Output Impedance (Nominal) 50 Ω CAUTION: Electrostatic Sensitive Device. Observe precautions for handling! C ACT 2003. All Rights Reserved. ○ A E A NOTE: 1. 2. 3. 4. 5. 6. The frequency fC is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50© test system with VSWRd1.2:1. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. .