GRM0225C1E100GDAE# “#” indicates a package specification code. < List of part numbers with package codes > GRM0225C1E100GDAEL Shape Notes Volt. & temp. derating recommended product References Packaging Specifications Minimum quantity φ180mm Embossed taping 40000 Mass (typ.) L size 0.4 ±0.02mm W size 0.2 ±0.02mm T size 0.2 ±0.02mm External terminal width e 0.07 to 0.14mm Distance between external terminals g 0.13mm min. Size code in inch(mm) 01005 (0402) 1 piece 0.09mg φ180mm Reel 117g Specifications Capacitance 10pF ±2% Rated voltage 25Vdc Temperature characteristics (complied standard) C0G(EIA) Temperature coefficient 0±30ppm/℃ Temperature range of temperature characteristics 25 to 125℃ Operating temperature range -55 to 125℃ 1 of 2 1.This datasheet is downloaded from the website of Murata Manufacturing Co., Ltd. Therefore, itʼs specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2.This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. URL : http://www.murata.com/ Last updated: 2015/10/01 Chart of characteristic data (The charts below may show another part number which shares its characteristics.) Frequency characteristics (ESR, Impedance) S parameter (Smith chart S11) DC bias characteristics AC voltage characteristics Capacitance - temperature characteristics 2 of 2 This PDF data has only typical specifications because there is no space for detailed specifications. Therefore, please reviewour product specifications or consult the approval sheet for product specifications before ordering. Last updated: 2015/10/01