ONSEMI MC10EL07DR2

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
2ĆInput XOR/XNOR
MC10EL07
MC100EL07
The MC10EL/100EL07 is a 2-input XOR/XNOR gate. The device is
functionally equivalent to the E107 device with higher performance
capabilities. With propagation delays and output transition times
significantly faster than the E107 the EL07 is ideally suited for those
applications which require the ultimate in AC performance.
•
•
•
•
260ps Propagation Delay
High Bandwidth Output Transitions
75kΩ Internal Input Pulldown Resistors
>1000V ESD Protection
8
1
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751-05
LOGIC DIAGRAM AND PINOUT ASSIGNMENT
NC 1
8 VCC
D0 2
7 Q
PIN DESCRIPTION
D1 3
6 Q
NC 4
5 VEE
PIN
FUNCTION
D0, D1
Q
Data Inputs
Data Outputs
DC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND)
–40°C
Symbol
Characteristic
Min
IEE
Power Supply Current 10EL
100EL
VEE
Power Supply Voltage 10EL
100EL
IIH
Input HIGH Current
–4.94
–4.20
0°C
Typ
Max
14
14
17
17
–5.2
–4.5
–5.5
–5.5
D0
D1
Min
–4.94
–4.20
25°C
Typ
Max
14
14
17
17
–5.2
–4.5
–5.5
–5.5
250
150
Min
–4.75
–4.20
85°C
Typ
Max
14
14
17
17
–5.2
–4.5
–5.5
–5.5
250
150
Min
–4.75
–4.20
Typ
Max
Unit
14
16
17
20
mA
–5.2
–4.5
–5.5
–5.5
V
250
150
µA
250
150
AC CHARACTERISTICS (VEE = VEE(min) to VEE(max); VCC = GND)
–40°C
Symbol
Characteristic
0°C
25°C
85°C
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Unit
tPLH
tPHL
Propagation Delay to
Output
90
250
435
140
250
385
150
260
395
170
280
415
ps
tr
tf
Output Rise/Fall Times Q
(20% – 80%)
100
225
350
100
225
350
100
225
350
100
225
350
ps
12/93
 Motorola, Inc. 1996
3–1
REV 2
MC10EL07 MC100EL07
OUTLINE DIMENSIONS
D SUFFIX
PLASTIC SOIC PACKAGE
CASE 751–05
ISSUE P
–A–
M
1
4
R
0.25 (0.010)
4X
–B–
X 45 _
B
M
5
P
8
NOTES:
1. DIMENSIONS A AND B ARE DATUMS AND T IS A
DATUM SURFACE.
2. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
3. DIMENSIONS ARE IN MILLIMETER.
4. DIMENSION A AND B DO NOT INCLUDE MOLD
PROTRUSION.
5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE.
6. DIMENSION D DOES NOT INCLUDE MOLD
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS
OF THE D DIMENSION AT MAXIMUM MATERIAL
CONDITION.
J
M_
C
F
G
–T–
K
SEATING
PLANE
8X
D
0.25 (0.010)
M
T B
S
A
S
DIM
A
B
C
D
F
G
J
K
M
P
R
MILLIMETERS
MIN
MAX
4.80
5.00
3.80
4.00
1.35
1.75
0.35
0.49
0.40
1.25
1.27 BSC
0.18
0.25
0.10
0.25
0_
7_
5.80
6.20
0.25
0.50
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.
How to reach us:
USA/EUROPE/Locations Not Listed: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315
MFAX: [email protected] – TOUCHTONE 602–244–6609
INTERNET: http://Design–NET.com
ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
◊
MOTOROLA
3–2
*MC10EL07/D*
MC10EL07/D
ECLinPS and ECLinPS Lite
DL140 — Rev 3