PD - 94550 ATR28XXD SERIES 28V Input, Dual Output ADVANCED ANALOG HYBRID-HIGH RELIABILITY DC/DC CONVERTERS Description The ATR28XXD Series of DC/DC converters feature high power density and an extended temperature range for use in military and industrial applications. Designed to MIL-STD-704D input requirements, these devices have nominal 28VDC inputs with ±12V and ±15V dual outputs to satisfy a wide range of requirements. The circuit design incorporates a pulse width modulated single forward topology operating in the feed-forward mode at a nominal switching frequency of 550KHz. Input to output isolation is achieved through the use of transformers in the forward and feedback circuits. The advanced feedback design provides fast loop response for superior line and load transient characteristics and offers greater reliability and radiation tolerance than devices incorporating optical feedback circuits. Three standard temperature grades are offered with screening options. Refer to Part Number section. They can be provided in a standard plug-in package for PC mounting or in a flanged package for more severe environments. These converters are manufactured in a facility certified to MIL-PRF-38534. All processes used to manufacture these converters have been qualified to enable Advanced Analog to deliver compliant devices. Four screening grades are available to satisfy a wide range of requirements. The CH grade converters are fully compliant to MIL-PRF-38534 for class H. The HB grade converters are processed to full class H screening but do not have class H element evaluation as required by MIL-PRF-38534. Both grades are fully tested and operate over the full military temperature range without derating of output power. The ES version is a full temperature device without the full class H or element evaluation. The non-suffix device is a low cost www.irf.com ATR Features n 16 to 40 VDC Input Range (28 VDC Nominal) n ±12V and ±15V Outputs Available n Indefinite Short Circuit and Overload Protection 3 n 35 W/in Power Density n 30 Watt Output Power n Fast Loop Response for Superior Transient Characteristics n Operating Temperature Range from -55°C to +125°C n Popular Industry Standard Pin-Out n Resistance Seam Welded Case for Superior Long Term Hermeticity n Ceramic Feed-thru Pins n External Synchronization n High Efficiency n Shutdown from External Signal n Military Screening limited temperature range option. Variations in electrical, mechanical and screening can be accommodated. Extensive computer simulation using complex modeling enables rapid design modification to be provided. Contact Advanced Analog with specific requirements. 1 10/29/02 ATR28XXD Series Specifications TCASE = -55°C to +85°C, VIN = +28V ± 5% unless otherwise specified ABSOLUTE MAXIMUM RATINGS Input Voltage -0.5V to 50VDC Power Output Internally limited, 36W typical Soldering 300°C for 10 seconds Recommended Operating -55°C to +85°C Temperature Range1 Maximum Operating -55°C to +115°C Storage -65°C to +135°C PARAMETER STATIC CHARACTERISTICS OUTPUT Voltage 5 Current Ripple Accuracy 1 Power REGULATION Line Load 6 CROSS REGULATION INPUT Voltage Range Current Ripple Current EFFICIENCY ISOLATION CAPACITIVE LOAD Load Fault Power Dissipation Switching Frequency 7 SYNC Frequency Range DYNAMIC CHARACTERISTICS Step Load Changes Output Transient Recovery 2 Step Line Changes Output Transient 2 Recovery TURN-ON Overshoot 3 Delay Load Fault Recovery Condition -55°C ≤ TC ≤ +85°C, VIN = 28 VDC ±5%, CL=0, unless otherwise specified VIN = 16 to 40 VDC IOUT = 0 to Full Load Full Load, 20KHz to 2MHz TCASE = 25°C, Full Load ATR2812D Typ Max Min Typ Max Units ±11.76 0.0 ±12.00 ±12.24 ±1.25 85 ±12.12 ±14.70 0.0 ±15.00 ±15.30 ±1.0 85 ±15.15 VDC ADC mV p-p VDC W 75 150 ±5 mV mV % 40.0 75 18 50 ±11.88 30 40 ±12.00 VIN = 16 to 40 VDC IOUT = 0 to Full Load VIN = 16, 28, and 40 VDC ±14.85 30 40 ±15.00 75 120 ±5 16.0 No Load, pin 2 = open Inhibited, pin 2 tied to pin 10 Full Load Full Load TC = +25°C Input to output @500 VDC No effect on performance TC = +25°C (total for both outputs) Short Circuit Overload, TC = +25°C IOUT = Full Load ATR2815D Min 28.0 25 82 40.0 75 18 50 100 100 VDC mADC mADC mA p-p % MΩ µF 9 14 600 700 9 14 600 700 W W KHz KHz 100 16.0 28.0 25 82 100 500 500 500 500 50% Load to 100% Load No Load to 50% Load ±100 ±250 ±100 ±250 mVpk mVpk 50% Load to 100% Load No Load to 50% Load 50% Load to No Load 25 500 3 25 500 3 µs µs ms Input step 16 to 40 VDC Input step 40 to 16 VDC Input step 16 to 40 VDC Input step 40 to 16 VDC ±180 -600 5 5 ±180 -600 5 5 mVpk mVpk ms ms VIN = 16 to 40 VDC IOUT = O and Full Load VIN = 16 to 40 VDC 0 14 14 600 25 25 0 14 14 600 25 25 mVpk ms ms Notes to Specifications 1. 2. 3. 4. 5. 6. 7. Above +85°C case temperature, derate output power linearly to 0 at +115°C case. Recovery time is measured from the initiation of the input transient to where VOUT has returned to within ±1% of VOUT at 50% load. Turn-on delay time measurement is for either an application of power at the input or a signal at the inhibit pin. Load current split equally between +VOUT and –VOUT. Up to 90% of Full Power is available from either output provided. The total power output does not exceed 30 watts. 3W load on output under test, 3W to 27W on other output. Sync. Input signal: VIL = -0.5V Min, VIN = 2.5V Min, 10% to 90% duty cycle, 0.8V Max 11.5V Max 2 www.irf.com ATR28XXD Series Specifications TCASE = -55°C to +125°C, VIN = +28V ± 5% unless otherwise specified ABSOLUTE MAXIMUM RATINGS Input Voltage -0.5V to 50VDC Power Output Internally limited, 36W typical Soldering 300°C for 10 seconds Temperature Range1 Recommended Operating Maximum Operating Storage PARAMETER STATIC CHARACTERISTICS OUTPUT Voltage 5 Current Ripple Accuracy 1 Power REGULATION Line Load 6 CROSS REGULATION INPUT Voltage Range Current Ripple Current EFFICIENCY ISOLATION CAPACITIVE LOAD Load Fault Power Dissipation Switching Frequency 7 SYNC Frequency Range DYNAMIC CHARACTERISTICS Step Load Changes Output Transient Recovery 2 Step Line Changes Output Transient 2 Recovery TURN-ON Overshoot 3 Delay Load Fault Recovery Condition -55°C ≤ TC ≤ +125°C, VIN = 28 VDC ±5%, CL=0, unless otherwise specified VIN = 16 to 40 VDC IOUT = 0 to Full Load Full Load, 20KHz to 2MHz TCASE = 25°C, Full Load -55°C to +125°C -55°C to +135°C -65°C to +135°C Typ Max Min Typ Max Units ±11.76 0.0 ±12.00 ±12.24 ±1.25 85 ±12.12 ±14.70 0.0 ±15.00 ±15.30 ±1.0 85 ±15.15 VDC ADC mV p-p VDC W ±11.88 30 40 ±12.00 VIN = 16 to 40 VDC IOUT = 0 to Full Load VIN = 16, 28, and 40 VDC ±14.85 30 40 ±15.00 75 120 ±5 16.0 No Load, pin 2 = open Inhibited, pin 2 tied to pin 10 Full Load Full Load TC = +25°C Input to output @500 VDC No effect on performance TC = +25°C (total for both outputs) Short Circuit Overload, TC = +25°C IOUT = Full Load ATR2815D/ES ATR2812D/ES Min 80 100 28.0 25 82 500 500 75 150 ±5 mV mV % 100 100 VDC mADC mADC mA p-p % MΩ µF 9 14 600 700 9 14 600 700 W W KHz KHz 40.0 75 18 50 16.0 79 100 28.0 25 82 500 500 40.0 75 18 50 50% Load to 100% Load No Load to 50% Load ±100 ±250 ±100 ±250 mVpk mVpk 50% Load to 100% Load No Load to 50% Load 50% Load to No Load 25 500 3 25 500 3 µs µs ms Input step 16 to 40 VDC Input step 40 to 16 VDC Input step 16 to 40 VDC Input step 40 to 16 VDC ±180 -600 5 5 ±180 -600 5 5 mVpk mVpk ms ms VIN = 16 to 40 VDC IOUT = O to Full Load VIN = 16 to 40 VDC 0 14 14 600 25 25 0 14 14 600 25 25 mVpk ms ms Notes to Specifications 1. 2. 3. 4. 5. 6. 7. Above +125°C case temperature, derate output power linearly to 0 at +135°C case. Recovery time is measured from the initiation of the input transient to where VOUT has returned to within ±1% of VOUT at 50% load. Turn-on delay time measurement is for either an application of power at the input or a signal at the inhibit pin. Load current split equally between +VOUT and –VOUT. Up to 90% of Full Power is available from either output provided. The total power output does not exceed 30 watts. 3W load on output under test, 3W to 27W on other output. Sync. Input signal: VIL = -0.5V Min, VIN = 2.5V Min, 10% to 90% duty cycle 0.8V Max, 11.5V Max www.irf.com 3 ATR28XXD Series Specifications TCASE = -55°C to +125°C, VIN = +28V ± 5% unless otherwise specified ABSOLUTE MAXIMUM RATINGS Input Voltage -0.5V to 50VDC Power Output Internally limited, 36W typical Soldering 300°C for 10 seconds Temperature Range1 Recommended Operating Maximum Operating Storage PARAMETER STATIC CHARACTERISTICS OUTPUT Voltage 5 Current Ripple Accuracy 1 Power REGULATION 4 Line 4 Load 6 CROSS REGULATION INPUT Voltage Range Current Ripple Current EFFICIENCY ISOLATION CAPACITIVE LOAD Load Fault Power Dissipation Switching Frequency 7 SYNC Frequency Range DYNAMIC CHARACTERISTICS Step Load Changes 4 Output Transient Recovery 2 Step Line Changes Output Transient 2 Recovery TURN-ON Overshoot 3 Delay Load Fault Recovery -55°C to +125°C -55°C to +135°C -65°C to +135°C Condition -55°C ≤ TC ≤ +125°C, VIN = 28 VDC ±5%, CL=0, unless otherwise specified VIN = 16 to 40 VDC IOUT = 0 to Full Load Full Load, 20KHz to 2MHz TCASE = 25°C, Full Load Typ Max Min Typ Max Units ±11.76 0.0 ±12.00 ±12.24 ±1.25 85 ±12.12 ±14.70 0.0 ±15.00 ±15.30 ±1.0 85 ±15.15 VDC ADC mV p-p VDC W ±11.88 30 40 ±12.00 VIN = 16 to 40 VDC IOUT = 0 to Full Load VIN = 16, 28, and 40 VDC ±14.85 30 40 ±15.00 75 120 ±5 16.0 No Load, pin 2 = open Inhibited, pin 2 tied to pin 10 Full Load Full Load TC = +25°C Input to output @500 VDC No effect on performance TC = +25°C (total for both outputs) Short Circuit Overload, TC = +25°C IOUT = Full Load ATR2815D/HB ATR2812D/HB Min 80 100 28.0 25 82 500 500 40.0 75 18 50 75 150 ±5 16.0 28.0 18 40.0 75 18 50 mV mV % 100 100 VDC mADC mADC mA p-p % MΩ µF 9 14 600 700 9 14 600 700 W W KHz KHz 79 100 25 82 500 500 50% Load to 100% Load No Load to 50% Load ±100 ±250 ±450 ±760 ±100 ±250 ±450 ±750 mVpk mVpk 50% Load to 100% Load No Load to 50% Load 50% Load to No Load 25 500 3 70 1500 5 25 500 3 70 1500 5 µs µs ms Input step 16 to 40 VDC Input step 40 to 16 VDC Input step 16 to 40 VDC Input step 40 to 16 VDC ±180 -600 5 5 1200 -1500 10 10 ±180 -600 5 5 1500 -1500 10 10 mVpk mVpk ms ms 0 14 14 600 25 25 0 14 14 600 25 25 mVpk ms ms VIN = 16 to 40 VDC IOUT = O to Full Load VIN = 16 to 40 VDC Notes to Specifications 1. 2. 3. 4. 5. 6. 7. Above +125°C case temperature, derate output power linearly to 0 at +135°C case. Recovery time is measured from the initiation of the input transient to where VOUT has returned to within ±1% of VOUT at 50% load. Turn-on delay time measurement is for either an application of power at the input or a signal at the inhibit pin. Load current split equally between +VOUT and –VOUT. Up to 90% of Full Power is available from either output provided. The total power output does not exceed 30 watts. 3W load on output under test, 3W to 27W on other output. Sync. Input signal: VIL = -0.5V Min, VIN = 2.5V Min, 10% to 90% duty cycle 0.8V Max, 11.5V Max 4 www.irf.com ATR28XXD Series Specifications TCASE = -55°C to +125°C, VIN = +28V ± 5% unless otherwise specified ABSOLUTE MAXIMUM RATINGS Input Voltage -0.5V to 50VDC Power Output Internally limited, 36W typical Soldering 300°C for 10 seconds Temperature Range1 Recommended Operating Maximum Operating Storage PARAMETER STATIC CHARACTERISTICS OUTPUT Voltage 5 Current Ripple Accuracy 1 Power REGULATION 4 Line 4 Load 6 CROSS REGULATION INPUT Voltage Range Current Ripple Current EFFICIENCY ISOLATION CAPACITIVE LOAD Load Fault Power Dissipation Switching Frequency 7 SYNC Frequency Range DYNAMIC CHARACTERISTICS Step Load Changes 4 Output Transient Recovery 2 Step Line Changes Output Transient 2 Recovery TURN-ON Overshoot 3 Delay Load Fault Recovery -55°C to +125°C -55°C to +135°C -65°C to +135°C Condition -55°C ≤ TC ≤ +125°C, VIN = 28 VDC ±5%, CL=0, unless otherwise specified VIN = 16 to 40 VDC IOUT = 0 to Full Load Full Load, 20KHz to 2MHz TCASE = 25°C, Full Load ATR2812D/CH Typ Max Min Typ Max Units ±11.76 0.0 ±12.00 ±12.24 ±1.25 85 ±12.12 ±14.70 0.0 ±15.00 ±15.30 ±1.0 85 ±15.15 VDC ADC mV p-p VDC W ±11.88 30 40 ±12.00 VIN = 16 to 40 VDC IOUT = 0 to Full Load VIN = 16, 28, and 40 VDC ±14.85 30 40 ±15.00 75 120 ±5 16.0 No Load, pin 2 = open Inhibited, pin 2 tied to pin 10 Full Load Full Load TC = +25°C Input to output @500 VDC No effect on performance TC = +25°C (total for both outputs) Short Circuit Overload, TC = +25°C IOUT = Full Load ATR2815D/CH Min 80 100 28.0 25 82 40.0 75 18 50 75 150 ±5 16.0 79 100 28.0 18 25 82 100 9 14 600 700 500 500 500 500 40.0 75 18 50 mV mV % 100 VDC mADC mADC mA p-p % MΩ µF 9 14 600 700 W W KHz KHz 50% Load to 100% Load No Load to 50% Load ±100 ±250 ±450 ±760 ±100 ±250 ±450 ±750 mVpk mVpk 50% Load to 100% Load No Load to 50% Load 50% Load to No Load 25 500 3 70 1500 5 25 500 3 70 1500 5 µs µs ms Input step 16 to 40 VDC Input step 40 to 16 VDC Input step 16 to 40 VDC Input step 40 to 16 VDC ±180 -600 5 5 1200 -1500 10 10 ±180 -600 5 5 1500 -1500 10 10 mVpk mVpk ms ms 0 14 14 600 25 25 0 14 14 600 25 25 mVpk ms ms VIN = 16 to 40 VDC IOUT = 0 to Full Load VIN = 16 to 40 VDC Notes to Specifications 1. 2. 3. 4. 5. 6. 7. Above +125°C case temperature, derate output power linearly to 0 at +135°C case. Recovery time is measured from the initiation of the input transient to where VOUT has returned to within ±1% of VOUT at 50% load. Turn-on delay time measurement is for either an application of power at the input or a signal at the inhibit pin. Load current split equally between +VOUT and –VOUT. Up to 90% of Full Power is available from either output provided. The total power output does not exceed 30 watts. 3W load on output under test, 3W to 27W on other output. Sync. Input signal: VIL = -0.5V Min, VIN = 2.5V Min, 10% to 90% duty cycle 0.8V Max, 11.5V Max www.irf.com 5 ATR28XXD Series ATR28XXD Block Diagram 1 3 +Vout EMI F ilte r + In pu t R eg u la to r 2 E n ab le 8 C ase 9 S yn c P rim ary H ou se ke e pin g S u pp ly 4 R etu rn 5 -V o u t D riv e E rro r Am p & Ref P u lse W id th FB M o d u la to r CS In p u t R etu rn 10 Application Information Thermal Management Inhibit Function Assuming that there is no forced air flow, the package temperature rise above ambient (∆T) may be calculated using the following expression: Connecting the inhibit input (Pin 2) to input common (Pin 10) will cause the converter to shut down. It is recommended that the inhibit pin be driven by an open collector device capable of sinking at least 400µA of current. The open circuit voltage of the inhibit input is 11.5 ±1 VDC. EMI Filter An EMI filter (AFC461), available as an option, will reduce the input ripple current to levels below the limits imposed by MIL-STD-461B CEO3. ∆Τ = 80 A Pd 0.85 (°C) (1) where A = the effective surface area in square inhes(including heat sink if used), Pd = power dissipation in watts. The total surface area of the ATR standard package is 7.34 square inches. If a worse case full load efficiency of 78% is assumed, then the case temperature rise can be calculated as follows: 1 1 Pd = POUT − 1 = 30 − 1 = 8.5W Eff 78 Device Synchronization Whenever multiple DC/DC converters are utilized in a single system, significant low frequency noise may be generated due to slight difference in the switching frequencies of the converters (beat frequency noise). Because of the low frequency nature of this noise (typically less than 10KHz), it is difficult to filter out and may interfere with proper operation of sensitive systems (communications, radar or telemetry). The Advanced Analog ATR28xx converters provide a synchronizing input permitting synchronization of multiple converters to the frequency of the users system clock, thereby minimizing this type of noise. –0.7 and ∆Τ = 80 (7.34) –0.7 (8.5) 0.85 = 122°C Hence, if TAMBIENT = +25°C, the DC/DC converter case temperature will be approximately 147°C if no heat sink or air flow is provided. To calculate the heat sink area required to maintain a specific case temperature rise, equation (1) may be manipulated as follows: ∆T AHEATSINK = 0.85 80Pd −1.43 − APKG As an example, if it is desired to limit the case temperature rise to a maximum of 50°C above ambient, the required effective heat sink area is: 50 AHEATSINK = 0.85 80 8 5 ( . ) 6 −1.43 − 7.34 = 19.1in 2 www.irf.com ATR28XXD Series ATR28XXD Case Outlines Non-Flanged Flanged Ø 0.162 2 H oles 0.050 0.800 6 10 8 7 4 5 4 X 0.400 =1.600 3 2.110 M ax 2 2.550 1 2.880 M ax 9 0.040 D X 0.26 L Pins 2.110 0.390 M ax 0.390 M ax 1.110 Part Numbering Pin Designation ATR 28 15 S F / CH Pin No. Designation 1 Positive Input 2 Inhibit Input 3 Positive Output 4 Output Return 5 Negative Output 6 N/C 7 N/C 8 Case 9 Sync. 10 Input Return Model Input Voltage 28 = 28V Nominal Output Voltage www.irf.com Single - 05, 12, 15VDC Dual - 12 = ±12V, 15 = ±15V Triple - 12 = 5V, ±12V 15 = 5V, ±15V Screening –, ES, HB, CH Package Style F = Flange Omit for Non-flange Outputs S = Single D = Dual T = Triple 7 ATR28XXD Series Available Screening Levels and Process Variations for ATR28XXD Series Requirement MIL-STD-883 Method Temperature Range Element Evaluation Internal Visual Temperature Cycle Constant Acceleration Burn-in Final Electrical (Group A) Seal, Fine & Gross External Visual No Suffix -20 to +85°C ES Suffix -55°C to +125°C HB Suffix -55°C to +125°C CH Suffix -55°C to +125°C MIL-PRF-38534 2017 1010 ∗ 2001 Yes Cond B Yes Cond C Yes Cond C 500g Cond A Cond A 1015 MIL-PRF38534 48hrs @ 85°C 25°C 48hrs @ 125°C 25°C 160hrs @ 125°C -55, +25, +125°C 160hrs @ 125°C -55, +25, +125°C 1014 ∗ Cond A, C Cond A, C Cond A, C 2009 ∗ Yes Yes Yes * Per Commercial Standards Available Standard Military Drawing (SMD) Cross Reference Standardized Military Drawing Pin 5962-9462701 Vendor CAGE Code 52467 Vendor Similar Pin ATR2812D 5962-9462801 52467 ATR2815D WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331 ADVANCED ANALOG: 2270 Martin Av., Santa Clara, California 95050, Tel: (408) 727-0500 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 10/02 8 www.irf.com