SPICE MODELS: DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK DCX (xxxx) K COMPLEMENTARY NPN/PNP PRE-BIASED SMALL SIGNAL SC-74R DUAL SURFACE MOUNT TRANSISTOR NEW PRODUCT Features · · · Epitaxial Planar Die Construction A SC-74R (Note 4) Built-In Biasing Resistors Available in Lead Free/RoHS Compliant Version (Note 3) B C Mechanical Data · · · · · Case: SC-74R (Note 4) G Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 H K Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Solderable per MIL-STD-202, Method 208 Also Available in Lead Free Plating (Matte Tin Finish annealed over Copper leadframe). Please see Ordering Information, Note 5, on Page 3 · · Terminal Connections: See Diagram · · Ordering Information (See Page 3) J M L D Marking: Date Code and Marking Code (See Diagrams & Page 4) Dim Min Max Typ A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 D 0.95 G 1.90 H 2.90 3.10 3.00 J 0.013 0.10 0.05 K 1.00 1.30 1.10 L 0.35 0.55 0.40 M 0.10 0.20 0.15 a 0° 8° ¾ All Dimensions in mm Weight: 0.015 grams (approximate) P/N R1 R2 MARKING DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK 22KW 47KW 10KW 2.2KW 10KW 4.7KW 10KW 22KW 47KW 47KW 47KW 10KW - C17 C20 C14 C06 C13 C07 C12 Maximum Ratings NPN Section @ TA = 25°C unless otherwise specified DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK Output Current Power Dissipation (Total) (Note 2) Thermal Resistance, Junction to Ambient Air (Note 1) Note: 1. 2. 3. 4. R1 Only SCHEMATIC DIAGRAM DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK Operating and Storage and Temperature Range R1 R1, R2 Characteristic Output Current R1 R2 R1 Supply Voltage, (3) to (1) Input Voltage, (2) to (1) R1 R 2 All Symbol Value Unit VCC 50 V VIN -10 to +40 -10 to +40 -6 to +40 -5 to +12 -10 to +40 -5 Vmax -5 Vmax V IO 30 30 70 100 50 100 100 mA IC (Max) 100 mA Pd 300 mW RqJA 417 °C/W Tj, TSTG -55 to +150 °C Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. 200mW per element must not be exceeded. No purposefully added lead. SC-74R and SOT-26 have identical dimensions and the only difference is the location of the pin one indicator. Please see the individual device datasheets for exact details regarding the location of the pin one indicator. DS30350 Rev. 5 - 2 1 of 11 www.diodes.com DCX (xxxx) K ã Diodes Incorporated NEW PRODUCT Maximum Ratings PNP Section @ TA = 25°C unless otherwise specified Characteristic Supply Voltage, (3) to (1) Input Voltage, (2) to (1) DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK Output Current Symbol Value Unit VCC 50 V VIN +10 to -40 +10 to -40 +6 to -40 +5 to -12 +10 to -40 +5 Vmax +5 Vmax V IO -30 -30 -70 -100 -50 -100 -100 mA IC (Max) -100 mA Pd 300 mW RqJA 833 °C/W Tj, TSTG -55 to +150 °C DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX143TK DCX114TK Output Current All Power Dissipation (Total) (Note 2) Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage and Temperature Range Note: 1. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. 2. 200mW per element must not be exceeded. Electrical Characteristics NPN Section Characteristic (DDC143TK & DDC114TK only) @ TA = 25°C unless otherwise specified Symbol Min Typ Max Unit Test Condition Collector-Base Breakdown Voltage BVCBO 50 ¾ ¾ V IC = 50mA Collector-Emitter Breakdown Voltage BVCEO 50 ¾ ¾ V IC = 1mA Emitter-Base Breakdown Voltage BVEBO 5 ¾ -- V IE = 50mA Collector Cutoff Current ICBO ¾ ¾ 0.5 mA VCB = 50V Emitter Cutoff Current IEBO ¾ ¾ 0.5 mA VEB = 4V IC/IB = 2.5mA / 0.25mA IC/IB = 1mA / 0.1mA DCX143TK DCX114TK VCE(sat) ¾ ¾ 0.3 V DC Current Transfer Ratio hFE 100 250 600 ¾ Input Resistor (R1) Tolerance DR1 -30 ¾ +30 % ¾ fT ¾ 250 ¾ MHz VCE = 10V, IE = -5mA, f = 100MHz Collector-Emitter Saturation Voltage Gain-Bandwidth Product* Characteristic Input Voltage DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Output Voltage DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Input Current DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Output Current DC Current Gain Input Resistor (R1) Tolerance Resistance Ratio Tolerance Gain-Bandwidth Product* DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK IC = 1mA, VCE = 5V Symbol Min Typ Max Unit Vl(off) 0.5 0.5 0.3 0.5 0.5 1.16 1.1 ¾ ¾ 1.1 ¾ V VCC = 5V, IO = 100mA ¾ 1.65 1.9 --1.9 3.0 3.0 1.4 1.1 3.0 V VO = 0.3, IO = 5mA VO = 0.3, IO = 2mA VO = 0.3, IO = 1mA VO = 0.3, IO = 5mA VO = 0.3, IO = 10mA IO/Il = 10mA / 0.5mA IO/Il = 10mA / 0.5mA IO/Il = 5mA / 0.25mA IO/Il = 5mA / 0.25mA IO/Il = 10mA / 0.5mA Vl(on) VO(on) ¾ Test Condition 0.1 0.3 V ¾ ¾ 0.36 0.18 0.88 3.6 0.88 mA VI = 5V IO(off) ¾ ¾ 0.5 mA VCC = 50V, VI = 0V Gl 80 68 68 80 30 ¾ ¾ ¾ VO = 5V, IO = 5mA VO = 5V, IO = 5mA VO = 5V, IO = 10mA VO = 5V, IO = 10mA VO = 5V, IO = 5mA DR1 -30 ¾ +30 % ¾ R2/R1 -20 ¾ +20 % ¾ fT ¾ 250 ¾ MHz Il VCE = 10V, IE = 5mA, f = 100MHz * Transistor - For Reference Only DS30350 Rev. 5 - 2 2 of 11 www.diodes.com DCX (xxxx) K NEW PRODUCT Electrical Characteristics PNP Section @ TA = 25°C unless otherwise specified Symbol Min Typ Max Unit Test Condition Collector-Base Breakdown Voltage Characteristic (DCX143TK & DCX114TK only) BVCBO -50 ¾ ¾ V IC = -50mA Collector-Emitter Breakdown Voltage BVCEO -50 ¾ ¾ V IC = -1mA Emitter-Base Breakdown Voltage BVEBO -5 ¾ ¾ V IE = -50mA Collector Cutoff Current ICBO ¾ ¾ -0.5 mA VCB = -50V Emitter Cutoff Current IEBO ¾ ¾ -0.5 mA VEB = -4V VCE(sat) ¾ ¾ -0.3 V DC Current Transfer Ratio hFE 100 250 600 ¾ Input Resistor (R1) Tolerance DR1 -30 ¾ +30 % ¾ fT ¾ 250 ¾ MHz VCE = -10V, IE = 5mA, f = 100MHz Collector-Emitter Saturation Voltage Gain-Bandwidth Product* Characteristic DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Input Voltage DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Output Voltage DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Input Current DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK Output Current DCX124EK DCX144EK DCX114YK DCX123JK DCX114EK DC Current Gain Input Resistor (R1) Tolerance Resistance Ratio Tolerance Gain-Bandwidth Product* IC/IB = 2.5mA / 0.25mA IC/IB = 1mA / 0.1mA DCX143TK DCX114TK IC = -1mA, VCE = -5V Symbol Min Typ Max Unit Vl(off) -0.5 -0.5 -0.3 -0.5 -0.5 -1.16 -1.1 ¾ ¾ -1.1 ¾ V VCC = -5V, IO = -100mA ¾ -1.9 -1.9 ¾ ¾ -1.9 -3.0 -3.0 -1.4 -1.1 -3.0 V VO = -0.3, IO = -5mA VO = -0.3, IO =- 2mA VO = -0.3, IO = -1mA VO = -0.3, IO = -5mA VO = -0.3, IO = -10mA IO/Il = -10mA /-0.5mA IO/Il = -10mA /-0.5mA IO/Il = -5mA /-0.25mA IO/Il = -5mA /-0.25mA IO/Il = -10mA/-0.5mA Vl(on) VO(on) ¾ Test Condition -0.1 -0.3 V ¾ ¾ -0.36 -0.18 -0.88 -3.6 -0.88 mA VI = -5V IO(off) ¾ ¾ -0.5 mA VCC = 50V, VI = 0V Gl 80 68 68 80 30 ¾ ¾ ¾ VO = -5V, IO = -5mA VO = -5V, IO = -5mA VO = -5V, IO = -10mA VO = -5V, IO = -10mA VO = -5V, IO = -5mA DR1 -30 ¾ +30 % R2/R1 -20 ¾ +20 % Il fT ¾ 250 ¾ MHz ¾ ¾ VCE = -10V, IE = -5mA, f = 100MHz * Transistor - For Reference Only Ordering Information (Note 5) Notes: Device Packaging Shipping DCX124EK-7 SC-74R 3000/Tape & Reel DCX144EK-7 SC-74R 3000/Tape & Reel DCX114YK-7 SC-74R 3000/Tape & Reel DCX123JK-7 SC-74R 3000/Tape & Reel DCX114EK-7 SC-74R 3000/Tape & Reel DCX143TK-7 SC-74R 3000/Tape & Reel DCX114TK-7 SC-74R 3000/Tape & Reel 5. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. 6. For Lead Free/RoHS Compliant version part numbers, please add "-F" suffix to the part numbers above. Example: DCX114TK-7-F. DS30350 Rev. 5 - 2 3 of 11 www.diodes.com DCX (xxxx) K XXX = Product Type Marking Code See Sheet 1 Diagrams YM = Date Code Marking Y = Year ex: T = 2006 M = Month ex: 9 = September YM XXX Date Code Key Year 2006 2007 2008 2009 Code T U V W Month Jan Feb March Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N D TYPICAL CURVES - DCX124EK PNP SECTION 350 0.1 0.09 300 IC, COLLECTOR CURRENT (A) PD, POWER DISSIPATION (mW) 250 200 150 100 50 Ib = 0.9mA 0.08 Ib = 0.8mA 0.07 Ib = 0.7mA 0.06 Ib = 0.6mA 0.05 0.04 Ib = 0.3mA Ib = 0.5mA 0.03 Ib = 0.4mA Ib = 0.2mA 0.02 Ib = 0.1mA 0.01 0 0 0 25 50 75 100 125 150 175 0 0.4 0.8 1.2 1.6 2 VCE , COLLECTOR EMITTER VOLTAGE (V) Fig. 2 VCE vs. IC TA , AMBIENT TEMPERATURE (°C) Fig. 1 Power Derating Curve 350 VCE = -5V TA = 125° C TA = 150° C 300 hFE, DC CURRENT GAIN NEW PRODUCT Marking Information 250 TA = 85° C 200 TA = 25° C 150 TA = -55° C 100 50 0 0.1 1 10 100 1000 IC, COLLECTOR CURRENT (mA) Fig. 3 DC Current Gain DS30350 Rev. 5 - 2 4 of 11 www.diodes.com DCX (xxxx) K 12 1 IC/IB = 10 VBE, BASE-EMITTER VOLTAGE (V) VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) VCE = -5V 11 TA = 150° C TA = 125° C TA = 85° C 0.1 TA = 25° C TA = -55° C 0.01 10 9 8 TA = -55° C 7 TA = 25° C 6 TA = 85° C 5 4 TA = 125° C 3 2 TA = 150° C 1 0 0.001 0 10 20 30 40 0.1 50 1 10 100 IC, COLLECTOR CURRENT (mA) IC , COLLECTOR CURRENT (mA) Fig. 4 VCE(SAT) vs IC Fig. 5 VBE vs. IC 15 30 VCE = -0.3V IC/IB = 10 27 24 VI(ON), INPUT VOLTAGE (V) VBE(SAT), BASE-EMITTER SATURATION VOLTAGE (V) TA = -55° C 21 TA = 25° C 18 TA = 85° C 15 TA = 125° C 12 9 12 9 6 TA = 25° C 3 6 3 TA = 150° C 0 0 0.1 1 10 0.1 100 TA = 85° C TA = -55° C TA = 150° C 1 TA = 125° C 10 100 IC, OUTPUT CURRENT (mA) IC, COLLECTOR CURRENT (mA) Fig. 7 VI(ON) vs. IC Fig. 6 VBE(SAT) vs. IC TYPICAL CURVES - DCX124EK NPN SECTION 350 PD, POWER DISSIPATION (mW) NEW PRODUCT TYPICAL CURVES - DCX124EK PNP SECTION 300 250 200 150 100 50 0 0 25 50 75 100 125 150 175 TA , AMBIENT TEMPERATURE ( C) Fig. 8 Power Derating Curve DS30350 Rev. 5 - 2 5 of 11 www.diodes.com DCX (xxxx) K 400 0.09 350 VCE = 5V 0.08 Ib = 0.9mA 0.07 Ib = 0.6mA 0.06 Ib = 0.7mA hFE, DC CURRENT GAIN IC, COLLECTOR CURRENT (A) 0.1 Ib = 0.8mA Ib = 0.5mA 0.05 0.04 Ib = 0.3mA 0.03 Ib = 0.4mA 0.02 Ib = 0.2mA Ib = 0.1mA TA = 150° C TA = 125° C 300 TA = 85° C 250 TA = 25° C 200 150 TA = -55° C 100 50 0.01 0 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 0.1 VCE, COLLECTOR EMITTER VOLTAGE (V) 10 100 1000 Fig. 10 DC Current Gain 1 10 TA = 125° C VBE, BASE-EMITTER VOLTAGE (V) IC/IB = 10 VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) 1 Ic, COLLECTOR CURRENT (mA) Fig. 9 VCE vs. IC TA = 150° C TA = 85° C 0.1 TA = 25° C TA = -55° C 0.01 VCE = 5V 9 8 7 6 TA = -55° C 5 TA = 25° C 4 TA = 85° C 3 TA = 125° C 2 1 0.001 0 10 20 30 40 TA = 150° C 0 50 0.1 IC, COLLECTOR CURRENT (mA) 1 10 100 IC, COLLECTOR CURRENT (mA) Fig. 12 VBE vs. IC Fig. 11 VCE(SAT) vs. IC 30 25 27 IC/IB = 10 VCE = 0.3V 22.5 24 20 VI(ON), INPUT VOLTAGE (V) VBE(SAT), BASE-EMITTER SATURATION VOLTAGE (V) NEW PRODUCT TYPICAL CURVES - DCX124EK NPN SECTION 21 18 TA = -55° C 15 TA = 25° C 12 TA = 85° C 9 TA = 125° C 6 17.5 15 12.5 10 3 2.5 0 0 1 10 100 IC, COLLECTOR CURRENT (mA) TA = 85° C TA = 25° C TA = 150° C 0.1 1 10 100 IC, OUTPUT CURRENT (mA) Fig. 14 VI(ON) vs. IC Fig. 13 VBE(SAT) vs. IC DS30350 Rev. 5 - 2 TA = 125° C 5 TA = 150° C 0.1 TA = -55° C 7.5 6 of 11 www.diodes.com DCX (xxxx) K 1 IC/IB = 10 VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) PD, POWER DISSIPATION (mW) 250 200 150 100 50 0 0.1 TA = 75° C TA = -25° C TA = 25° C 0.01 0.001 -50 0 50 100 150 10 0 20 40 30 50 IC, COLLECTOR CURRENT (mA) Fig. 16 VCE(SAT) vs. IC TA, AMBIENT TEMPERATURE (° C) Fig. 15 Derating Curve 1000 4 VCE = 10 COB, CAPACITANCE (pF) IE = 0mA hFE, DC CURRENT GAIN TA = 75° C TA = 25° C TA = -25° C 100 3 2 1 0 5 0 10 1 10 IC, COLLECTOR CURRENT (mA) Fig. 17 DC Current Gain 100 100 10 15 25 20 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 18 Output Capacitance 10 TA = 75°C VO = 5V VO = 0.2 TA = 25°C 10 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) NEW PRODUCT TYPICAL CURVES - DCX123JK PNP SECTION TA = -25°C 1 0.1 0.01 0.001 0 1 2 3 4 5 6 7 8 9 10 TA = -25°C 1 TA = 25°C 0.1 Vin, INPUT VOLTAGE (V) Fig. 19 Collector Current Vs. Input Voltage DS30350 Rev. 5 - 2 TA = 75° C 7 of 11 www.diodes.com 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 20 Input Voltage vs. Collector Current DCX (xxxx) K 1 IC/IB = 10 VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) PD, POWER DISSIPATION (mW) 250 200 150 100 50 0 0.1 TA = 75° C TA = -25° C TA = 25° C 0.01 0.001 -50 0 50 100 150 10 0 30 40 50 4 1000 VCE = 10 COB, CAPACITANCE (pF) IE = 0mA TA = 75° C hFE, DC CURRENT GAIN 20 IC, COLLECTOR CURRENT (mA) Fig. 22 VCE(SAT) vs. IC TA, AMBIENT TEMPERATURE (° C) Fig. 21 Derating Curve TA = 25° C TA = -25° C 100 3 2 1 0 0 10 1 10 IC, COLLECTOR CURRENT (mA) Fig. 23 DC Current Gain 100 100 5 10 15 20 25 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 24 Output Capacitance 10 TA = 75°C VO = 5V VO = 0.2 TA = 25°C 10 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) NEW PRODUCT TYPICAL CURVES - DCX123JK NPN SECTION TA = -25°C 1 0.1 0.01 0.001 0 1 2 3 4 5 6 7 8 9 10 TA = -25°C 1 TA = 25°C 0.1 Vin, INPUT VOLTAGE (V) Fig. 25 Collector Current Vs. Input Voltage DS30350 Rev. 5 - 2 TA = 75° C 8 of 11 www.diodes.com 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 26 Input Voltage vs. Collector Current DCX (xxxx) K 250 1 VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) PD, POWER DISSIPATION (mW) IC/IB = 10 200 150 100 50 0 -50 0 50 100 0.1 TA = 75° C TA = -25° C TA = 25° C 0.01 0.001 150 10 0 1000 TA = 25° C 100 10 8 6 4 2 0 100 50 10 1 1 40 IE = 0mA COB, CAPACITANCE (pF) hFE, DC CURRENT GAIN TA = -25° C 30 12 VCE = 10 TA = 75° C 20 IC, COLLECTOR CURRENT (mA) Fig. 28 VCE(SAT) vs. IC TA, AMBIENT TEMPERATURE (° C) Fig. 27 Derating Curve 10 IC, COLLECTOR CURRENT (mA) Fig. 29 DC Current Gain 0 100 5 10 15 20 25 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 30 Output Capacitance 10 TA = 75°C VO = 0.2 TA = 25°C 10 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) NEW PRODUCT TYPICAL CURVES - DCX114TK PNP SECTION TA = -25°C 1 0.1 0.01 0.001 0 1 2 3 4 5 6 7 8 9 10 TA = -25°C 1 TA = 25°C 0.1 Vin, INPUT VOLTAGE (V) Fig. 31 Collector Current Vs. Input Voltage DS30350 Rev. 5 - 2 TA = 75° C 9 of 11 www.diodes.com 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 32 Input Voltage vs. Collector Current DCX (xxxx) K 250 1 VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) PD, POWER DISSIPATION (mW) IC/IB = 10 200 150 100 50 0 -50 0 50 100 0.1 TA = 75° C TA = -25° C TA = 25° C 0.01 0.001 150 10 0 1000 40 50 IE = 0mA COB, CAPACITANCE (pF) hFE, DC CURRENT GAIN TA = -25° C 30 4 VCE = 10 TA = 75° C 20 IC, COLLECTOR CURRENT (mA) Fig. 34 VCE(SAT) vs. IC TA, AMBIENT TEMPERATURE (° C) Fig. 33 Derating Curve TA = 25° C 100 10 3 2 1 0 1 1 100 10 IC, COLLECTOR CURRENT (mA) Fig. 35 DC Current Gain 0 100 5 15 10 20 25 30 VR, REVERSE BIAS VOLTAGE (V) Fig. 36 Output Capacitance 10 TA = 75°C VO = 0.2 TA = 25°C 10 Vin, INPUT VOLTAGE (V) IC, COLLECTOR CURRENT (mA) NEW PRODUCT TYPICAL CURVES - DCX114TK NPN SECTION TA = -25°C 1 0.1 TA = -25°C TA = 75° C 1 TA = 25°C 0.01 0.001 0 1 2 3 4 5 6 7 8 9 10 1 Vin, INPUT VOLTAGE (V) Fig. 37 Collector Current Vs. Input Voltage DS30350 Rev. 5 - 2 10 of 11 www.diodes.com 0 10 20 30 40 50 IC, COLLECTOR CURRENT (mA) Fig. 38 Input Voltage vs. Collector Current DCX (xxxx) K NEW PRODUCT IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30350 Rev. 5 - 2 11 of 11 www.diodes.com DCX (xxxx) K